diff --git a/README.rst b/README.rst
new file mode 100644
index 0000000..ae7bcd5
--- /dev/null
+++ b/README.rst
@@ -0,0 +1,96 @@
+========
+PyWMTemp
+========
+
+WindowMaker dockapp for monitoring resources like CPU/GPU temperatures. It
+supports up to 2 different readings.
+
+
+Requirements
+============
+
+* Python
+* wmdocklib
+* psutil
+
+Note, that you'll need to install `this wmdocklib`_ instead of original
+`pywmdockapps`_, since the latter works only with Python2.
+
+
+Installation
+============
+
+For now, use virtualenv:
+
+.. code:: shell-session
+
+   $ python -m virtualenv venv
+   $ . venv/bin/activate
+   (venv) $ pip install .
+
+
+Usage
+=====
+
+You'll need to prepare yaml file with the configuration. And put it in
+``~/.config/pywmtemp.yaml`` (or whatever your XDG_CONFIG_HOME points to). For
+example:
+
+.. code:: yaml
+
+   ---
+   readings:
+     - sensor: k10temp
+       label: Tccd1
+       name: cpu
+       override_warning: 65
+       override_critical: 70
+       unit: °C
+     - sensor: amdgpu
+       label: edge
+       name: gpu
+       override_warning: 60
+       override_critical: 70
+       unit: °C
+
+This will look for the two separate temperatures, one for AMD Ryzen CPU,
+second for Radeon graphic card. Your hardware might vary, see the output of:
+
+.. code:: shell-session
+
+   $ python -c 'import psutil; import pprint; pprint.pprint(psutil.sensors_temperatures())'
+
+There are six supported keys in the config:
+
+- sensor - case sensitive sensor name, it corresponds for the keys in
+  dictionary returned by ``psutil.sensors_temperatures()``
+- label - it's a unique label for the sensor reading, all the ``shwtemp``
+  namedtuples should have it. Case sensitive.
+- name - name displayed on the dockapp. It will be uppercased.
+- unit - it should be always °C
+- override_warning - if not set, ``high`` value from shwtemp would be used if
+  exists.
+- override_warning - if not set, ``critical`` value from shwtemp would be used
+  if exists.
+
+Those last keys will set the threshold when color for the temperature line will
+change.
+
+By clicking with the left mouse button on the graph region, it will switch
+between those two readings.
+
+You can create only one entry if you like. If you create more than two entries
+in config, all above first two will be ignored. You can, however, run multiple
+instances of this dockapp by passing different configs using ``--config``
+parameter.
+
+
+License
+=======
+
+This software is licensed under 3-clause BSD license. See LICENSE file for
+details.
+
+
+.. _this wmdocklib: https://github.com/gryf/wmdocklib
+.. _pywmdockapps: https://github.com/mfrasca/pywmdockapps