Added urls for sourcecode

LICENSE

@@ -0,0 +1,24 @@
+Copyright (c) 2015, Roman Dobosz
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+    * Neither the name of the organization nor the names of its contributors
+      may be used to endorse or promote products derived from this software
+      without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL ROMAN DOBOSZ BE LIABLE FOR ANY DIRECT, INDIRECT, 
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 
+EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

README.rst

@@ -0,0 +1,122 @@
+===================================================
+Midnight Commander virtual filesystem for d64 files
+===================================================
+
+This extfs provides an access to disk image files for the Commodore
+VIC20/C64/C128 for Midnight Commander. It requires the utility c1541 that comes
+bundled with Vice, the emulator for the VIC20, C64, C128 and other computers
+made by Commodore.
+
+Features
+========
+
+* view, remove, copy files in and out of the image
+* support for read from and write to d64 images
+* gzipped disk images support
+* onfly characters remapping (see below)
+
+Remarks
+=======
+
+Due to different way of representing file entries on regular D64 disk images,
+there could be issues with filenames that are transfered from/to the image.
+Following rules was applied to represent a single file entry:
+
+1. An extension is attached to the end of a filename depending on a file type.
+   Possible extensions are: ``prg``, ``del``, ``seq``, ``usr`` and ``rel``.
+2. Every non-ASCII character (which could be some of characters specific to
+   PET-ASCII, or be a control character) will be replaced by dot (``.``), since
+   ``c1541`` program will list them that way.
+3. Every slash character (``/``) will be replaced by pipe character (``|``).
+4. Leading space will be replaced by tilda (``~``).
+
+While copying from D64 image to filesystem, filenames will be stored as they
+are seen on a listing.
+
+While copying from filesystem to D64 image, filename conversion will be done:
+
+1. Every ``$`` and ``*`` characters will be replaced by question mark (``?``)
+2. Every pipe (``|``) and backslash (``\``) characters will be replaced by
+   slash (``/``)
+3. Every tilda (``~``) will be replaced by a space
+4. ``prg`` extension will be truncated
+
+Representation of a directory can be sometimes confusing - in case when one
+copied file without extension it stays there in such form, till next access
+(after flushing VFS). Also file sizes are not accurate, since D64 directory
+entries have sizes stored as 256 bytes blocks.
+
+Screens below shows how it looks like on real C64 machine and its representation
+on Midnight Commander listing.
+
+|image1| |image2|
+
+In ``media`` directory you can find the ``test.d6z`` gzip compressed D64 image
+file.
+
+Rquirements
+===========
+
+* Python 2.7
+* Vice installation (c1541 program in path)
+
+Installation
+============
+
+* copy ``uc1541`` to ``~/.local/share/mc/extfs.d/``
+* add or change entry for files handle in ``~/.config/mc/mc.ext``::
+
+    # Disk images for Commodore computers (VIC20, C64, C128)
+    regex/\.(d64|D64|d6z|D6z|d6Z|D6Z)$
+        Open=%cd %p/uc1541://
+        View=%view{ascii} c1541 %f -list
+        Extract=c1541 %f -extract
+
+Configuration
+=============
+
+Here are specific for this script variable, which while set, can influence
+script behaviour:
+
+* ``UC1541_DEBUG`` - if set, uc1541 will produce log in /tmp/uc1541.log file.
+* ``UC1541_VERBOSE`` - if set, script will be more verbose, i.e. error messages
+  form c1541 program will be passed to Midnight Commander, so that user will be
+  aware of error cause if any.
+* ``UC1541_HIDE_DEL`` - if set, no DEL entries will be shown.
+
+Changelog
+=========
+
+* **2.8** Treat non standard discs a bit better
+* **2.7** Added support for gzipped disk images
+* **2.6** Added mkdir and run handling (or rather lack of handling :). Minor
+  refactoring.
+* **2.5** Fixed bug with filenames started with a '-' sign.
+* **2.4** Fixed endless loop bug for reading directory in Python implemented
+  directory reader.
+* **2.3** Re added and missing method _correct_fname used for writing files
+  into d64 image.
+* **2.2** Fixed bug(?) with unusual sector end (marked as sector 0, not 255),
+  causing endless directory reading on random locations.
+* **2.1** Fixed bug with filenames containing slash.
+* **2.0** Added reading raw D64 image, and mapping for jokers. Now it is
+  possible to read files with PET-ASCII/control sequences in filenames. Working
+  with d64 images only. Added workaround for space at the beginning of the
+  filename.
+* **1.2** Added configuration env variables: ``UC1541_VERBOSE`` and
+  ``UC1541_HIDE_DEL``.  First one, if set to any value, will cause that error
+  messages from ``c1541`` program will be redirected as a failure messages
+  visible in MC.
+  The other variable, when set to any value, cause *del* entries to be not
+  shown in the lister.
+* **1.1** Added protect bits, added failsafe for ``argparse`` module
+* **1.0** Initial release
+
+License
+=======
+
+This software is licensed under 3-clause BSD license. See LICENSE file for
+details.
+
+.. |image1| image:: /media/vice_dir.png?raw=true
+.. |image2| image:: /media/mc.png?raw=true

uc1541

@@ -2,81 +2,12 @@
 """
 UC1541 Virtual filesystem
 
-This extfs provides an access to disk image files for the Commodore
-VIC20/C64/C128. It requires the utility c1541 that comes bundled with Vice,
-the emulator for the VIC20, C64, C128 and other computers made by Commodore.
-
-Remarks
--------
-
-Due to different way of representing file entries on regular D64 disk images,
-there could be issues with filenames that are transfered from/to the image.
-Following rules was applied to represent a single file entry:
-
-1. An extension is attached to the end of a filename depending on a file type.
-   Possible extensions are: prg, del, seq, usr and rel.
-2. Every non-ASCII character (which could be some of characters specific to
-   PET-ASCII, or be a control character) will be replaced by dot (.), since
-   c1541 program will list them that way.
-3. Every slash character (/) will be replaced by pipe character (|).
-4. Leading space will be replaced by tilda (~).
-
-While copying from D64 image to filesystem, filenames will be stored as they
-are seen on a listing.
-
-While copying from filesystem to D64 image, filename conversion will be done:
-1. Every $ and * characters will be replaced by question mark (?)
-2. Every pipe (|) and backslash (\) characters will be replaced by slash (/)
-3. Every tilda (~) will be replaced by a space
-4. 'prg' extension will be truncated
-
-Representation of a directory can be sometimes confusing - in case when one
-copied file without extension it stays there in such form, till next access
-(after flushing VFS). Also file sizes are not accurate, since D64 directory
-entries have sizes stored as 256 bytes blocks.
-
-Configuration
--------------
-
-Here are specific for this script variable, which while set, can influence
-script behaviour:
-
-UC1541_DEBUG - if set, uc1541 will produce log in /tmp/uc1541.log file
-
-UC1541_VERBOSE - if set, script will be more verbose, i.e. error messages form
-c1541 program will be passed to Midnight Commander, so that user will be aware
-of error cause if any.
-
-UC1541_HIDE_DEL - if set, no DEL entries will be shown
-
-Changelog:
-    2.7 Added support for gzipped disk images
-    2.6 Added mkdir and run handling (or rather lack of handling :). Minor
-        refactoring.
-    2.5 Fixed bug with filenames started with a '-' sign.
-    2.4 Fixed endless loop bug for reading directory in Python implemented
-        directory reader.
-    2.3 Re added and missing method _correct_fname used for writing files
-        into d64 image.
-    2.2 Fixed bug(?) with unusual sector end (marked as sector 0, not 255),
-        causing endless directory reading on random locations.
-    2.1 Fixed bug with filenames containing slash.
-    2.0 Added reading raw D64 image, and mapping for jokers. Now it is
-        possible to read files with PET-ASCII/control sequences in filenames.
-        Working with d64 images only. Added workaround for space at the
-        beggining of the filename.
-    1.2 Added configuration env variables: UC1541_VERBOSE and UC1541_HIDE_DEL.
-        First one, if set to any value, will cause that error messages from
-        c1541 program will be redirected as a failure messages visible in MC.
-        The other variable, when set to any value, cause "del" entries to be
-        not shown in the lister.
-    1.1 Added protect bits, added failsafe for argparse module
-    1.0 Initial release
-
 Author: Roman 'gryf' Dobosz <gryf73@gmail.com>
-Date: 2013-11-12
+Date: 2014-01-04
-Version: 2.7
+Version: 2.8
 Licence: BSD
+source: https://bitbucket.org/gryf/uc1541
+mirror: https://github.com/gryf/uc1541
 """
 
 import sys
@@ -227,6 +158,11 @@ class D64(object):
 
         self.current_sector_data = self.raw[offset:offset + 256]
 
+        # Guard for reading data out of bound - that happened for discs which
+        # store only raw data, even on 18 track
+        if not self.current_sector_data:
+            return False
+
         self.next_track = ord(self.current_sector_data[0])
         self.next_sector = ord(self.current_sector_data[1])
 
@@ -339,6 +275,11 @@ class Uc1541(object):
         LOG.info("List contents of %s", self.arch)
         directory = self._get_dir()
 
+        # If there is an error reading directory, show the reason to the user
+        if self.out.startswith("Error"):
+            sys.stderr.write(self.out.split("\n")[0] + "\n")
+            return 2
+
         for entry in directory:
             sys.stdout.write("%(perms)s   1 %(uid)-8d %(gid)-8d %(size)8d "
                              "Jan 01 1980 %(display_name)s\n" % entry)
@@ -508,11 +449,10 @@ class Uc1541(object):
             dir/list
         """
         command = ['c1541', '-attach', self.arch, '-%s' % cmd]
-        if src and dst:
+        if src:
             command.append(src)
+        if dst:
             command.append(dst)
-        elif src or dst:
-            command.append(src and src or dst)
 
         self.out, self.err = Popen(command, stdout=PIPE,
                                    stderr=PIPE).communicate()