Code cleanup.

There was an issue regarding c1541 in old version - during removal of
the file from the image, as a success message 'ERRORCODE 1' was placed
on the stdout. If there was an issue with the file different message was
placed also on stdout. Luckily, that weird behaviour was fixed in 3.x
series of the Vice. So now we can remove unnecessary code.

Also, fixed two bugs for pyton3, introduced during new formats
development.

LICENSE

@@ -0,0 +1,24 @@
+Copyright (c) 2015, Roman Dobosz
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+    * Neither the name of the organization nor the names of its contributors
+      may be used to endorse or promote products derived from this software
+      without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL ROMAN DOBOSZ BE LIABLE FOR ANY DIRECT, INDIRECT, 
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 
+EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

README.rst

@@ -0,0 +1,129 @@
+===================================================
+Midnight Commander virtual filesystem for C64 disks
+===================================================
+
+This extfs provides an access to disk image files for the Commodore
+VIC20/C64/C128 for Midnight Commander. It requires the utility c1541 that comes
+bundled with Vice, the emulator for the VIC20, C64, C128 and other computers
+made by Commodore.
+
+Features
+========
+
+* View, remove, copy files in and out of the image,
+* Support for read from and write to d64, d71 and d81 images,
+* Gzipped disk images support,
+* On fly characters remapping (see below).
+
+Remarks
+=======
+
+Due to different way of representing file entries on regular Commodore disk
+images, there could be issues with filenames that are transfered from/to the
+image. Following rules was applied to represent a single file entry:
+
+1. An extension is attached to the end of a filename depending on a file type.
+   Possible extensions are: ``prg``, ``del``, ``seq``, ``usr`` and ``rel``.
+2. Every non-ASCII character (which could be some of characters specific to
+   PET-ASCII, or be a control character) will be replaced by dot (``.``), since
+   ``c1541`` program will list them that way.
+3. Every slash character (``/``) will be replaced by pipe character (``|``).
+4. Leading space will be replaced by tilda (``~``).
+
+While copying from disk image to filesystem, filenames will be stored as they
+are seen on a listing.
+
+While copying from filesystem to disk image, filename conversion will be done:
+
+1. Every ``$`` and ``*`` characters will be replaced by question mark (``?``)
+2. Every pipe (``|``) and backslash (``\``) characters will be replaced by
+   slash (``/``)
+3. Every tilde (``~``) will be replaced by a space
+4. ``prg`` extension will be truncated
+
+Representation of a directory can be sometimes confusing - in case when one
+copied file without extension it stays there in such form, till next access
+(after flushing VFS). Also file sizes are not accurate, since directory entries
+in CBM format have sizes stored as 256 bytes blocks.
+
+Screens below shows how it looks like on real C64 machine and its representation
+on Midnight Commander listing.
+
+|image1| |image2|
+
+In ``media`` directory you can find the ``test.d6z`` gzip compressed D64 image
+file.
+
+Rquirements
+===========
+
+* Python 2.7 or Python 3.6 or higher
+* Vice installation (c1541 program in path)
+
+Installation
+============
+
+* copy ``uc1541`` to ``~/.local/share/mc/extfs.d/``
+* add or change entry for files handle in ``~/.config/mc/mc.ext``::
+
+    # Disk images for Commodore computers (VIC20, C64, C128)
+    regex/\.([dD]64|[dD]6[zZ]|[dD]71|[dD]7[zZ]|[dD]81|[dD]8[zZ])$
+        Open=%cd %p/uc1541://
+        View=%view{ascii} c1541 %f -list
+        Extract=c1541 %f -extract
+
+Configuration
+=============
+
+Here are specific for this script variable, which while set, can influence
+script behaviour:
+
+* ``UC1541_DEBUG`` - if set, uc1541 will produce log in /tmp/uc1541.log file.
+* ``UC1541_VERBOSE`` - if set, script will be more verbose, i.e. error messages
+  form c1541 program will be passed to Midnight Commander, so that user will be
+  aware of error cause if any.
+* ``UC1541_HIDE_DEL`` - if set, no DEL entries will be shown.
+
+Changelog
+=========
+
+* **3.4** Code cleanup. Removed dummy logger class and sys.args based argument
+  parsing.
+* **3.3** Added support for .d71 and .d81 disk images.
+* **3.2** Changed shebang to ``python`` executable instead of ``python3``
+* **3.1** Argparse on Python3 have different behaviour, where if no subcommand
+  is provided, it will pass anyway. Fixed.
+* **3.0** Added beta quality Python3 support
+* **2.8** Treat non standard discs a bit better
+* **2.7** Added support for gzipped disk images
+* **2.6** Added mkdir and run handling (or rather lack of handling :). Minor
+  refactoring.
+* **2.5** Fixed bug with filenames started with a '-' sign.
+* **2.4** Fixed endless loop bug for reading directory in Python implemented
+  directory reader.
+* **2.3** Re added and missing method _correct_fname used for writing files
+  into d64 image.
+* **2.2** Fixed bug(?) with unusual sector end (marked as sector 0, not 255),
+  causing endless directory reading on random locations.
+* **2.1** Fixed bug with filenames containing slash.
+* **2.0** Added reading raw D64 image, and mapping for jokers. Now it is
+  possible to read files with PET-ASCII/control sequences in filenames. Working
+  with d64 images only. Added workaround for space at the beginning of the
+  filename.
+* **1.2** Added configuration env variables: ``UC1541_VERBOSE`` and
+  ``UC1541_HIDE_DEL``.  First one, if set to any value, will cause that error
+  messages from ``c1541`` program will be redirected as a failure messages
+  visible in MC.
+  The other variable, when set to any value, cause *del* entries to be not
+  shown in the lister.
+* **1.1** Added protect bits, added failsafe for ``argparse`` module
+* **1.0** Initial release
+
+License
+=======
+
+This software is licensed under 3-clause BSD license. See LICENSE file for
+details.
+
+.. |image1| image:: /media/vice_dir.png?raw=true
+.. |image2| image:: /media/mc.png?raw=true

uc1541

@@ -1,93 +1,25 @@
-#! /usr/bin/env python
+#!/usr/bin/env python
 """
 UC1541 Virtual filesystem
 
-This extfs provides an access to disk image files for the Commodore
-VIC20/C64/C128. It requires the utility c1541 that comes bundled with Vice,
-the emulator for the VIC20, C64, C128 and other computers made by Commodore.
-
-Remarks
--------
-
-Due to different way of representing file entries on regular D64 disk images,
-there could be issues with filenames that are transfered from/to the image.
-Following rules was applied to represent a single file entry:
-
-1. An extension is attached to the end of a filename depending on a file type.
-   Possible extensions are: prg, del, seq, usr and rel.
-2. Every non-ASCII character (which could be some of characters specific to
-   PET-ASCII, or be a control character) will be replaced by dot (.), since
-   c1541 program will list them that way.
-3. Every slash character (/) will be replaced by pipe character (|).
-4. Leading space will be replaced by tilda (~).
-
-While copying from D64 image to filesystem, filenames will be stored as they
-are seen on a listing.
-
-While copying from filesystem to D64 image, filename conversion will be done:
-1. Every $ and * characters will be replaced by question mark (?)
-2. Every pipe (|) and backslash (\) characters will be replaced by slash (/)
-3. Every tilda (~) will be replaced by a space
-4. 'prg' extension will be truncated
-
-Representation of a directory can be sometimes confusing - in case when one
-copied file without extension it stays there in such form, till next access
-(after flushing VFS). Also file sizes are not accurate, since D64 directory
-entries have sizes stored as 256 bytes blocks.
-
-Configuration
--------------
-
-Here are specific for this script variable, which while set, can influence
-script behaviour:
-
-UC1541_DEBUG - if set, uc1541 will produce log in /tmp/uc1541.log file
-
-UC1541_VERBOSE - if set, script will be more verbose, i.e. error messages form
-c1541 program will be passed to Midnight Commander, so that user will be aware
-of error cause if any.
-
-UC1541_HIDE_DEL - if set, no DEL entries will be shown
-
-Changelog:
-    2.7 Added support for gzipped disk images
-    2.6 Added mkdir and run handling (or rather lack of handling :). Minor
-        refactoring.
-    2.5 Fixed bug with filenames started with a '-' sign.
-    2.4 Fixed endless loop bug for reading directory in Python implemented
-        directory reader.
-    2.3 Re added and missing method _correct_fname used for writing files
-        into d64 image.
-    2.2 Fixed bug(?) with unusual sector end (marked as sector 0, not 255),
-        causing endless directory reading on random locations.
-    2.1 Fixed bug with filenames containing slash.
-    2.0 Added reading raw D64 image, and mapping for jokers. Now it is
-        possible to read files with PET-ASCII/control sequences in filenames.
-        Working with d64 images only. Added workaround for space at the
-        beggining of the filename.
-    1.2 Added configuration env variables: UC1541_VERBOSE and UC1541_HIDE_DEL.
-        First one, if set to any value, will cause that error messages from
-        c1541 program will be redirected as a failure messages visible in MC.
-        The other variable, when set to any value, cause "del" entries to be
-        not shown in the lister.
-    1.1 Added protect bits, added failsafe for argparse module
-    1.0 Initial release
-
 Author: Roman 'gryf' Dobosz <gryf73@gmail.com>
-Date: 2013-11-12
+Date: 2020-06-28
-Version: 2.7
+Version: 3.4
 Licence: BSD
+source: https://bitbucket.org/gryf/uc1541
+mirror: https://github.com/gryf/uc1541
 """
-
+import argparse
-import sys
-import re
-import os
 import gzip
-from subprocess import Popen, PIPE
+import logging
+import os
+import re
+import subprocess
+import sys
 
+
+LOG = logging.getLogger('UC1541')
 if os.getenv('UC1541_DEBUG'):
-    import logging
-    LOG = logging.getLogger('UC1541')
     LOG.setLevel(logging.DEBUG)
     FILE_HANDLER = logging.FileHandler("/tmp/uc1541.log")
     FILE_FORMATTER = logging.Formatter("%(asctime)s %(levelname)-8s "
@@ -95,35 +27,67 @@ if os.getenv('UC1541_DEBUG'):
     FILE_HANDLER.setFormatter(FILE_FORMATTER)
     FILE_HANDLER.setLevel(logging.DEBUG)
     LOG.addHandler(FILE_HANDLER)
-else:
-    class LOG(object):
-        """
-        Dummy logger object. Does nothing.
-        """
-        @classmethod
-        def debug(*args, **kwargs):
-            pass
-
-        @classmethod
-        def info(*args, **kwargs):
-            pass
-
-        @classmethod
-        def warning(*args, **kwargs):
-            pass
-
-        @classmethod
-        def error(*args, **kwargs):
-            pass
-
-        @classmethod
-        def critical(*args, **kwargs):
-            pass
 
 
-class D64(object):
+SECLEN = 256
+
+
+def _ord(string_or_int):
     """
-    Implement d64 directory reader
+    Return an int value for the (possible) string passed in argument. This
+    function is for compatibility between python2 and python3, where single
+    element in byte string array is a string or an int respectively.
+    """
+    try:
+        return ord(string_or_int)
+    except TypeError:
+        return string_or_int
+
+
+def _get_raw(dimage):
+    """
+    Try to get contents of the D64 image either it's gzip compressed or not.
+    """
+    raw = None
+    with gzip.open(dimage, 'rb') as fobj:
+        # Although the common approach with gzipped files is to check the
+        # magic number, in this case there is no guarantee that first track
+        # does not contain exactly the same byte sequence as the magic number.
+        # So the only way left is to actually try to uncompress the file.
+        try:
+            raw = fobj.read()
+        except (IOError, OSError):
+            pass
+    if not raw:
+        with open(dimage, 'rb') as fobj:
+            raw = fobj.read()
+
+    return raw
+
+
+def _get_implementation(disk):
+    """
+    Check the file under fname and return right class for creating an object
+    corresponding for the file
+    """
+    len_map = {822400: D81,  # 80 tracks
+               819200: D81,  # 80 tracks, 3200 error bytes
+               349696: D71,  # 70 tracks
+               351062: D71,  # 70 tracks, 1366 error bytes
+               174848: D64,  # usual d64 disc image, 35 tracks, no errors
+               175531: D64,  # 35 track, 683 error bytes
+               196608: D64,  # 40 track, no errors
+               197376: D64}  # 40 track, 768 error bytes
+
+    if disk[:32].startswith(b'C64'):
+        return  # T64
+
+    return len_map.get(len(disk))(disk)
+
+
+class Disk(object):
+    """
+    Represent common disk interface
     """
     CHAR_MAP = {32: ' ', 33: '!', 34: '"', 35: '#', 37: '%', 38: '&', 39: "'",
                 40: '(', 41: ')', 42: '*', 43: '+', 44: ',', 45: '-', 46: '.',
@@ -150,36 +114,20 @@ class D64(object):
                   0b011: 'usr',
                   0b100: 'rel'}
 
-    def __init__(self, dimage):
+    DIR_TRACK = 18
+    DIR_SECTOR = 1
+
+    def __init__(self, raw):
         """
         Init
         """
-        LOG.debug('image: %s', dimage)
+        self.raw = raw
-        self.raw = None
         self.current_sector_data = None
         self.next_sector = 0
         self.next_track = None
         self._dir_contents = []
         self._already_done = []
 
-        self._get_raw(dimage)
-
-    def _get_raw(self, dimage):
-        """Try to get contents of the D64 image either it's gzip compressed or
-        not."""
-        fobj = gzip.open(dimage)
-        # Although the common approach with gzipped files is to check the
-        # magic number, in this case there is no guarantee that first track
-        # does not contain exactly the same byte sequence as the magic number.
-        # So the only way left is to actually try to uncompress the file.
-        try:
-            self.raw = fobj.read()
-        except IOError:
-            fobj.close()
-            fobj = open(dimage)
-            self.raw = fobj.read()
-            fobj.close()
-
     def _map_filename(self, string):
         """
         Transcode filename to ASCII compatible. Replace not supported
@@ -189,10 +137,10 @@ class D64(object):
         filename = list()
 
         for chr_ in string:
-            if ord(chr_) == 160:  # shift+space character; $a0
+            if _ord(chr_) == 160:  # shift+space character; $a0
                 break
 
-            character = D64.CHAR_MAP.get(ord(chr_), '?')
+            character = D64.CHAR_MAP.get(_ord(chr_), '?')
             filename.append(character)
 
         # special cases
@@ -218,17 +166,23 @@ class D64(object):
             return False
 
         if self.next_track is None:
-            LOG.debug("Going to the track: 18,1")
+            LOG.debug("Going to the track: %s, %s", self.DIR_TRACK,
-            offset = self._get_d64_offset(18, 1)
+                      self.DIR_SECTOR)
+            offset = self._get_offset(self.DIR_TRACK, self.DIR_SECTOR)
         else:
-            offset = self._get_d64_offset(self.next_track, self.next_sector)
+            offset = self._get_offset(self.next_track, self.next_sector)
             LOG.debug("Going to the track: %s,%s", self.next_track,
                       self.next_sector)
 
-        self.current_sector_data = self.raw[offset:offset + 256]
+        self.current_sector_data = self.raw[offset:offset + SECLEN]
 
-        self.next_track = ord(self.current_sector_data[0])
+        # Guard for reading data out of bound - that happened for discs which
-        self.next_sector = ord(self.current_sector_data[1])
+        # store only raw data, even on directory track
+        if not self.current_sector_data:
+            return False
+
+        self.next_track = _ord(self.current_sector_data[0])
+        self.next_sector = _ord(self.current_sector_data[1])
 
         if (self.next_track, self.next_sector) in self._already_done:
             # Just a failsafe. Endless loop is not what is expected.
@@ -249,30 +203,11 @@ class D64(object):
                                                   num & 2 and 1,
                                                   num & 1), 2), '???')
 
-    def _get_d64_offset(self, track, sector):
+    def _get_offset(self, track, sector):
         """
         Return offset (in bytes) for specified track and sector.
         """
-
+        return 0
-        offset = 0
-        truncate_track = 0
-
-        if track > 17:
-            offset = 17 * 21 * 256
-            truncate_track = 17
-
-        if track > 24:
-            offset += 6 * 19 * 256
-            truncate_track = 24
-
-        if track > 30:
-            offset += 5 * 18 * 256
-            truncate_track = 30
-
-        track = track - truncate_track
-        offset += track * sector * 256
-
-        return offset
 
     def _harvest_entries(self):
         """
@@ -281,7 +216,7 @@ class D64(object):
         sector = self.current_sector_data
         for dummy in range(8):
             entry = sector[:32]
-            ftype = ord(entry[2])
+            ftype = _ord(entry[2])
 
             if ftype == 0:  # deleted
                 sector = sector[32:]
@@ -289,12 +224,12 @@ class D64(object):
 
             type_verbose = self._get_ftype(ftype)
 
-            protect = ord(entry[2]) & 64 and "<" or " "
+            protect = _ord(entry[2]) & 64 and "<" or " "
             fname = entry[5:21]
             if ftype == 'rel':
-                size = ord(entry[23])
+                size = _ord(entry[23])
             else:
-                size = ord(entry[30]) + ord(entry[31]) * 226
+                size = _ord(entry[30]) + _ord(entry[31]) * 226
 
             self._dir_contents.append({'fname': self._map_filename(fname),
                                        'ftype': type_verbose,
@@ -313,6 +248,123 @@ class D64(object):
         return self._dir_contents
 
 
+class D64(Disk):
+    """
+    Implement d64 directory reader
+    """
+
+    def _get_offset(self, track, sector):
+        """
+        Return offset (in bytes) for specified track and sector.
+
+        Track   Sectors/track   # Tracks
+        -----   -------------   ---------
+         1-17        21            17
+        18-24        19             7
+        25-30        18             6
+        31-40        17            10
+        """
+        offset = 0
+        truncate_track = 0
+
+        if track > 17:
+            offset = 17 * 21 * SECLEN
+            truncate_track = 17
+
+        if track > 24:
+            offset += 7 * 19 * SECLEN
+            truncate_track = 24
+
+        if track > 30:
+            offset += 6 * 18 * SECLEN
+            truncate_track = 30
+
+        track = track - truncate_track
+        offset += track * sector * SECLEN
+
+        return offset
+
+
+class D71(Disk):
+    """
+    Implement d71 directory reader
+    """
+
+    def _get_offset(self, track, sector):
+        """
+        Return offset (in bytes) for specified track and sector.
+
+            Track       Sec/trk   # Tracks
+        --------------  -------   ---------
+         1-17 (side 0)    21         17
+        18-24 (side 0)    19          7
+        25-30 (side 0)    18          6
+        31-35 (side 0)    17          5
+        36-52 (side 1)    21         17
+        53-59 (side 1)    19          7
+        60-65 (side 1)    18          6
+        66-70 (side 1)    17          5
+        """
+        offset = 0
+        truncate_track = 0
+
+        if track > 17:
+            offset = 17 * 21 * SECLEN
+            truncate_track = 17
+
+        if track > 24:
+            offset += 7 * 19 * SECLEN
+            truncate_track = 24
+
+        if track > 30:
+            offset += 6 * 18 * SECLEN
+            truncate_track = 30
+
+        if track > 35:
+            offset += 5 * 17 * SECLEN
+            truncate_track = 35
+
+        if track > 52:
+            offset = 17 * 21 * SECLEN
+            truncate_track = 17
+
+        if track > 59:
+            offset += 7 * 19 * SECLEN
+            truncate_track = 24
+
+        if track > 65:
+            offset += 6 * 18 * SECLEN
+            truncate_track = 30
+
+        track = track - truncate_track
+        offset += track * sector * SECLEN
+
+        return offset
+
+
+class D81(Disk):
+    """
+    Implement d81 directory reader
+    """
+    DIR_TRACK = 40
+    DIR_SECTOR = 3
+    FILE_TYPES = {0b000: 'del',
+                  0b001: 'seq',
+                  0b010: 'prg',
+                  0b011: 'usr',
+                  0b100: 'rel',
+                  0b101: 'cbm'}
+
+    def _get_offset(self, track, sector):
+        """
+        Return offset (in bytes) for specified track and sector. In d81 is
+        easy, since we have 80 tracks with 40 sectors for 256 bytes each.
+        """
+        # we wan to go to the beginning (first sector) of the track, not it's
+        # max, so that we need to extract its amount.
+        return (track * 40 - 40) * SECLEN + sector * SECLEN
+
+
 class Uc1541(object):
     """
     Class for interact with c1541 program and MC
@@ -326,7 +378,7 @@ class Uc1541(object):
         self._verbose = os.getenv("UC1541_VERBOSE", False)
         self._hide_del = os.getenv("UC1541_HIDE_DEL", False)
 
-        self.pyd64 = D64(archname).list_dir()
+        self.dirlist = _get_implementation(_get_raw(archname)).list_dir()
         self.file_map = {}
         self.directory = []
 
@@ -339,6 +391,11 @@ class Uc1541(object):
         LOG.info("List contents of %s", self.arch)
         directory = self._get_dir()
 
+        # If there is an error reading directory, show the reason to the user
+        if self.out.startswith("Error"):
+            sys.stderr.write(self.out.split("\n")[0] + "\n")
+            return 2
+
         for entry in directory:
             sys.stdout.write("%(perms)s   1 %(uid)-8d %(gid)-8d %(size)8d "
                              "Jan 01 1980 %(display_name)s\n" % entry)
@@ -350,19 +407,7 @@ class Uc1541(object):
         """
         LOG.info("Removing file %s", dst)
         dst = self._get_masked_fname(dst)
-
+        return self._call_command('delete', dst=dst)
-        if not self._call_command('delete', dst=dst):
-            return self._show_error()
-
-        # During removing, a message containing ERRORCODE is sent to stdout
-        # instead of stderr. Everything other than 'ERRORCODE 1' (which means:
-        # 'everything fine') is actually a failure. In case of verbose error
-        # output it is needed to copy self.out to self.err.
-        if '\nERRORCODE 1\n' not in self.out:
-            self.err = self.out
-            return self._show_error()
-
-        return 0
 
     def copyin(self, dst, src):
         """
@@ -370,11 +415,7 @@ class Uc1541(object):
         """
         LOG.info("Copy into D64 %s as %s", src, dst)
         dst = self._correct_fname(dst)
-
+        return self._call_command('write', src=src, dst=dst)
-        if not self._call_command('write', src=src, dst=dst):
-            return self._show_error()
-
-        return 0
 
     def copyout(self, src, dst):
         """
@@ -387,10 +428,7 @@ class Uc1541(object):
 
         src = self._get_masked_fname(src)
 
-        if not self._call_command('read', src=src, dst=dst):
+        return self._call_command('read', src=src, dst=dst)
-            return self._show_error()
-
-        return 0
 
     def mkdir(self, dirname):
         """Not supported"""
@@ -451,8 +489,9 @@ class Uc1541(object):
         uid = os.getuid()
         gid = os.getgid()
 
-        if not self._call_command('list'):
+        res = self._call_command('list')
-            return self._show_error()
+        if res != 0:
+            return res
 
         idx = 0
         for line in self.out.split("\n"):
@@ -463,7 +502,7 @@ class Uc1541(object):
                     continue
 
                 display_name = ".".join([fname, ext])
-                pattern_name = self.pyd64[idx]['fname']
+                pattern_name = self.dirlist[idx]['fname']
 
                 if '/' in display_name:
                     display_name = display_name.replace('/', '|')
@@ -485,7 +524,7 @@ class Uc1541(object):
                                   'display_name': display_name,
                                   'uid': uid,
                                   'gid': gid,
-                                  'size': int(blocks) * 256,
+                                  'size': int(blocks) * SECLEN,
                                   'perms': perms})
                 idx += 1
         return directory
@@ -508,15 +547,29 @@ class Uc1541(object):
             dir/list
         """
         command = ['c1541', '-attach', self.arch, '-%s' % cmd]
-        if src and dst:
+        if src:
             command.append(src)
+        if dst:
             command.append(dst)
-        elif src or dst:
-            command.append(src and src or dst)
 
-        self.out, self.err = Popen(command, stdout=PIPE,
+        LOG.debug('executing command: %s', ' '.join(command))
-                                   stderr=PIPE).communicate()
+        # For some reason using write and delete commands and reading output
-        return not self.err
+        # confuses Python3 beneath MC and as a consequence MC report an
+        # error...therefore for those commands let's not use
+        # universal_newlines...
+        universal_newlines = True
+        if cmd in ['delete', 'write']:
+            universal_newlines = False
+        (self.out,
+         self.err) = subprocess.Popen(command,
+                                      universal_newlines=universal_newlines,
+                                      stdout=subprocess.PIPE,
+                                      stderr=subprocess.PIPE).communicate()
+
+        if self.err:
+            LOG.debug('an err: %s', self.err)
+            return self._show_error()
+        return 0
 
 
 CALL_MAP = {'list': lambda a: Uc1541(a.arch).list(),
@@ -529,8 +582,10 @@ CALL_MAP = {'list': lambda a: Uc1541(a.arch).list(),
 
 def parse_args():
     """Use ArgumentParser to check for script arguments and execute."""
-    parser = ArgumentParser()
+    parser = argparse.ArgumentParser()
-    subparsers = parser.add_subparsers(help='supported commands')
+    subparsers = parser.add_subparsers(help='supported commands',
+                                       dest='subcommand')
+    subparsers.required = True
     parser_list = subparsers.add_parser('list', help="List contents of D64 "
                                         "image")
     parser_copyin = subparsers.add_parser('copyin', help="Copy file into D64 "
@@ -574,43 +629,6 @@ def parse_args():
     return args.func(args)
 
 
-def no_parse():
-    """Failsafe argument "parsing". Note, that it blindly takes positional
-    arguments without checking them. In case of wrong arguments it will
-    silently exit"""
-    try:
-        if sys.argv[1] not in ('list', 'copyin', 'copyout', 'rm', 'mkdir',
-                               "run"):
-            sys.exit(2)
-    except IndexError:
-        sys.exit(2)
-
-    class Arg(object):
-        """Mimic argparse object"""
-        dst = None
-        src = None
-        arch = None
-
-    arg = Arg()
-
-    try:
-        arg.arch = sys.argv[2]
-        if sys.argv[1] in ('copyin', 'copyout'):
-            arg.src = sys.argv[3]
-            arg.dst = sys.argv[4]
-        elif sys.argv[1] in ('rm', 'run', 'mkdir'):
-            arg.dst = sys.argv[3]
-    except IndexError:
-        sys.exit(2)
-
-    return CALL_MAP[sys.argv[1]](arg)
-
 if __name__ == "__main__":
     LOG.debug("Script params: %s", str(sys.argv))
-    try:
+    sys.exit(parse_args())
-        from argparse import ArgumentParser
-        PARSE_FUNC = parse_args
-    except ImportError:
-        PARSE_FUNC = no_parse
-
-    sys.exit(PARSE_FUNC())