Command extapck will be available on topmost completion again.

Fixes for modifyvm options completion.
Fixed list command
2025-12-19 20:38:05 +01:00 · 2019-12-22 19:06:05 +01:00 · 2019-12-22 19:03:09 +01:00 · 2019-12-22 19:03:09 +01:00 · 2019-12-22 19:02:50 +01:00 · 2019-09-16 07:24:42 +02:00
2 changed files with 367 additions and 100 deletions
--- a/README.rst
+++ b/README.rst
@@ -6,7 +6,7 @@ script. However, in some point of time I've decided to rewrite it almost from
 scratch.

 Current version of script was written and tested against VBoxManage in version
-5.0.18, and supports all commands (in some extent ;)).
+6.0.12, and should contain all commands and their options.

 Unlike other attempts, I've tried to make the script context aware. See the
 simple session with the VBoxManage command below, to have an idea how it works:
--- a/451
+++ b/451
@@ -1,7 +1,10 @@
 # bash command-line completion for VBoxManage command
 #
 # Author: Roman 'gryf' Dobosz <gryf73@gmail.com>
+# URL: https://bitbucket.org/gryf/vboxmanage-bash-completion
+# URL: https://github.com/gryf/vboxmanage-bash-completion
 # License: 3-clause BSD-style license (see LICENSE file)
+# Version: 6.0.12

 _VBoxManage() {
    local cur prev opts cmd subcommand tmp items name index result
@@ -39,6 +42,18 @@ _VBoxManage() {
        done
    }

+    _is_any_item_used() {
+        local i
+
+        result=""
+        for i in $@; do
+            if [[ " ${COMP_WORDS[@]} " == *" $i "* ]]; then
+                result="ITIS"
+                break
+            fi
+        done
+    }
+
    # Generate registered hard disk files.
    # NOTE: This function may introduce some quirks, if there is a space or
    # other characters which usually are treated as IFS - like space. Pipe
@@ -256,11 +271,14 @@ _VBoxManage() {
        snap=$(VBoxManage snapshot "${name//\\/}" \
            list | \
            grep UUID |
-            awk -F ': ' '{print $2}' | \
-            sed 's/ (.*//' | \
-            tr '\n' '|' | \
-            sed 's/|$//' | \
-            sed 's/\s/\\ /g')
+            awk -F ': *' -v ORS='|' '/UUID: / {
+              n=$2; u=$3
+              sub(/..UUID/, "", n)
+              gsub(/ /, "\\ ", n);
+              sub(/[)].*/, "", u)
+              print n; print u
+              }'
+        )
        IFS='|' read -ra snap <<< "$snap"

        for item in "${snap[@]}"
@@ -305,14 +323,10 @@ _VBoxManage() {

    _list_comp() {
        local list
-        list=$(VBoxManage list | \
-            grep '|' | \
-            sed 's/\[.*\]//g'| \
-            sed 's/VBoxManage list//' | \
-            tr "\\n" " " | \
-            sed 's/$/\n/' | \
-            sed 's/\s\+//g' | \
-            sed 's/|/ /g')
+        list=$(VBoxManage list | sed -e '1,2d' \
+            -e 's/VBoxManage list //' \
+            -e 's/[\[\]\|]/ /g' \
+            -e 's/|/ /g'|xargs echo)
        COMPREPLY=( $(compgen -W "$list" -- ${cur}) )
    }

@@ -438,6 +452,10 @@ _VBoxManage() {
        sort | \
        uniq)

+    # Add some commands manually, since they are listed differently in
+    # vboxmanage help.
+    opts="${opts} mediumio debugvm unattended extpack"
+
    if [[ ${cur} == "-q" || ${COMP_CWORD} -eq 1 ]] ; then
        COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
        return 0
@@ -497,6 +515,7 @@ _VBoxManage() {
                fi
            fi
            ;;
+
        checkmediumpwd)
            if [[ ${prev} == ${cmd} ]]; then
                _hdd_comp
@@ -560,7 +579,7 @@ _VBoxManage() {
                        ;;
                    --options)
                        COMPREPLY=( $(compgen -W "link keepallmacs keepnatmacs
-                        keepdisknames" -- ${cur}) )
+                        keepdisknames keephwuuids" -- ${cur}) )
                        ;;
                    --groups)
                        COMPREPLY=()
@@ -618,18 +637,17 @@ _VBoxManage() {
                setlinkstate3 setlinkstate4 setlinkstate5 setlinkstate6
                setlinkstate7 setlinkstate8 setvideomodehint teleport unplugcpu
                usbattach usbdetach vrde vrdeport vrdeproperty
-                vrdevideochannelquality webcam videocap videocapscreens
-                videocapfile videocapres videocaprate videocapfps
-                videocapmaxtime videocapmaxsize addencpassword removeencpassword
-                removeallencpasswords)
-
+                vrdevideochannelquality webcam recording addencpassword
+                removeencpassword removeallencpasswords keyboardputstring
+                keyboardputfile audioin audioout setscreenlayout changeuartmode1
+                changeuartmode2)

                _find_item_name 2
                subcommand=${COMP_WORDS[$((index+1))]}

                if [[ " ${items[@]} " == *" $subcommand "* ]]; then
                    case "${subcommand}" in
-                        nictracefile[1-8])
+                        keyboardputfile|nictracefile[1-8])
                            [[ ${prev} == "nictracefile"* ]] && \
                                COMPREPLY=( $(compgen -f -- ${cur}) )
                            ;;
@@ -652,7 +670,7 @@ _VBoxManage() {
                                COMPREPLY=( $(compgen -W "delete tcp
                                udp" -- ${cur}) )
                            ;;
-                        setlinkstate[1-8])
+                        audioin|audioout|setlinkstate[1-8])
                            [[ ${prev} == "setlinkstate"* ]] && \
                                COMPREPLY=( $(compgen -W "on off" -- ${cur}) )
                            ;;
@@ -663,14 +681,28 @@ _VBoxManage() {
                            ;;
                        draganddrop)
                            [[ ${prev} == "draganddrop" ]] && \
-                                COMPREPLY=( $(compgen -W "disabled
-                                hosttoguest" -- ${cur}) )
+                                COMPREPLY=( $(compgen -W "disabled hosttoguest
+                                guesttohost bidirectional" -- ${cur}) )
                            ;;
-                        vrde|videocap)
-                            [[ ${prev} == "vrde" ||
-                            ${prev} == "videocap" ]] && \
+                        vrde)
+                            [[ ${prev} == "vrde" ]] && \
                                COMPREPLY=( $(compgen -W "on off" -- ${cur}) )
                            ;;
+                        recording)
+                            [[ ${prev} == "recording" ]] && \
+                                COMPREPLY=( $(compgen -W "on off screens
+                                    filename videores videorate videofps maxtime
+                                    maxfilesize"  -- ${cur}) )
+                            case "${prev}" in
+                                screens)
+                                    COMPREPLY=( $(compgen -W "all none
+                                        <screen>" -- ${cur}) )
+                                    ;;
+                                filename)
+                                    COMPREPLY=( $(compgen -f -- ${cur}) )
+                                    ;;
+                            esac
+                            ;;
                        videocapscreens)
                            [[ ${prev} == "videocapscreens" ]] && \
                                COMPREPLY=( $(compgen -W "all none" -- ${cur}) )
@@ -700,18 +732,24 @@ _VBoxManage() {
                            _get_excluded_items "${tmp[@]}"
                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                            ;;
-
                        --removeonsuspend)
                            COMPREPLY=( $(compgen -W "yes no" -- ${cur}) )
                            ;;
-
                        addencpassword)
                            tmp=(--host --port --maxdowntime --passwordfile
                            --password)
                            _get_excluded_items "${tmp[@]}"
                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                            ;;
+                        changeuartmode[1-2])
+                            tmp=(disconnected server client tcpserver tcpclient
+                                file "<devicename>")
+                            _get_excluded_items "${tmp[@]}"
+                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
+                            ;;
                    esac
+                elif [[ ${prev} == "--passwordfile" || ${prev} == "--capturefile" ]]; then
+                    COMPREPLY=( $(compgen -f -- ${cur}) )
                else
                    [[ ${#COMPREPLY[@]} -eq 0 ]] && \
                            COMPREPLY=( $(compgen -W "${items[*]}" -- ${cur}) )
@@ -757,7 +795,7 @@ _VBoxManage() {

                        case "${prev}" in
                            --filename)
-                                COMPREPLY=( $(compgen -- ${cur}) )
+                                COMPREPLY=( $(compgen -f -- ${cur}) )
                                ;;
                            --diffparent)
                                COMPREPLY=()
@@ -769,7 +807,7 @@ _VBoxManage() {
                                ;;
                            --variant)
                                COMPREPLY=( $(compgen -W "Standard Fixed Split2G
-                                Stream ESX" -- ${cur}) )
+                                Stream ESX Formatted" -- ${cur}) )
                                ;;
                        esac
                        ;;
@@ -778,7 +816,8 @@ _VBoxManage() {
            ;;

        createvm)
-            items=(--name --groups --ostype --register --basefolder --uuid)
+            items=(--name --groups --ostype --register --basefolder --uuid
+                --default)
            if [[ ${prev} == ${cmd} ]]; then
                COMPREPLY=( $(compgen -W "${items[*]}" -- ${cur}) )
            else
@@ -805,9 +844,9 @@ _VBoxManage() {
            fi
            ;;

-        debugvm)
+        "debugvm")
            items=(dumpguestcore info injectnmi log logdest logflags osdetect
-            osinfo osdmesg getregisters setregisters show statistics)
+            osinfo osdmesg getregisters setregisters show statistics stack)
            if [[ ${prev} == ${cmd} ]]; then
                _vms_comp runningvms
            else
@@ -824,7 +863,7 @@ _VBoxManage() {
                            _get_excluded_items "${items[@]}"
                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                            ;;
-                        getregisters|setregisters)
+                        getregisters|setregisters|stack)
                            _get_excluded_items "--cpu"
                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                            ;;
@@ -835,7 +874,7 @@ _VBoxManage() {
                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                            ;;
                        statistics)
-                            items=(--reset --pattern)
+                            items=(--reset --pattern --descriptions)
                            _get_excluded_items "${items[@]}"
                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                            ;;
@@ -848,11 +887,10 @@ _VBoxManage() {
                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                            ;;
                    esac
-                    _get_excluded_items "--descriptions"
                    COMPREPLY+=( $(compgen -W "$result" -- ${cur}) )
                else
                    [[ "${prev}" == "--filename" ]] && \
-                        COMPREPLY=( $(compgen -- ${cur}) )
+                        COMPREPLY=( $(compgen -f -- ${cur}) )
                    [[ ${#COMPREPLY[@]} -eq 0 ]] && \
                        COMPREPLY=( $(compgen -W "${items[*]}" -- ${cur}) )
                fi
@@ -865,7 +903,7 @@ _VBoxManage() {
            if [[ " ${items[@]} " == *" $subcommand "* ]]; then
                case "${subcommand}" in
                    add|modify)
-                        items=(--ip --netmask --lowerip --upperip)
+                        items=(--ip --netmask --lowerip --upperip --options)

                        [[ " ${COMP_WORDS[@]} " != *" --ifname"* &&
                            " ${COMP_WORDS[@]} " != *" --netname"* ]] &&
@@ -875,6 +913,9 @@ _VBoxManage() {
                            " ${COMP_WORDS[@]} " != *" --disable"* ]] &&
                            items+=(--enable --disable)

+                        [[ " ${COMP_WORDS[@]} " == *" --options"* ]] &&
+                            items+=(--vm --nic --id --value --remove)
+
                        _get_excluded_items "${items[@]}"
                        COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                        ;;
@@ -919,14 +960,19 @@ _VBoxManage() {
            else
                COMPREPLY=( $(compgen -W "--newpassword --oldpassword --cipher
                --newpasswordid" -- ${cur}) )
-
            fi
            ;;

        "export")
-            items=( --manifest --iso --options --vsys)
+            items=( --manifest --iso --options --vsys --cloud)
            if [[ ${prev} == ${cmd} ]]; then
                _vms_comp vms
+            elif [[ ${prev} == "--eulafile" ]]; then
+                COMPREPLY=( $(compgen -f -- ${cur}) )
+            elif [[ ${prev} == "--cloudkeepobject" ||
+                    ${prev} == "--cloudlaunchinstance" ||
+                    ${prev} == "--cloudpublicip" ]]; then
+                COMPREPLY=( $(compgen -W "true false" -- ${cur}) )
            else
                [[ " ${COMP_WORDS[@]} " != *" -o "* &&
                    " ${COMP_WORDS[@]} " != *" --output "* ]] &&
@@ -934,11 +980,16 @@ _VBoxManage() {
                [[ " ${COMP_WORDS[@]} " != *" --legacy09 "* &&
                    " ${COMP_WORDS[@]} " != *" --ovf09 "* &&
                    " ${COMP_WORDS[@]} " != *" --ovf10 "* &&
-                    " ${COMP_WORDS[@]} " != *" --ovf20 "* ]] &&
-                    items+=(--legacy09 --ovf09 --ovf10 --ovf20)
+                    " ${COMP_WORDS[@]} " != *" --ovf20 "* &&
+                    " ${COMP_WORDS[@]} " != *" --opc20 "* ]] &&
+                    items+=(--legacy09 --ovf09 --ovf10 --ovf20 --opc10)
                [[ " ${COMP_WORDS[@]} " == *" --vsys "* ]] &&
                    items+=(--product --producturl --vendor --vendorurl
-                    --version --description --eula --eulafile)
+                    --version --description --eula --eulafile --vmname)
+                [[ " ${COMP_WORDS[@]} " == *" --cloud"* ]] &&
+                    items+=(--vmname --cloudprofile --cloudshape --clouddomain
+                    --clouddisksize --cloudbucket --cloudocivcn --cloudocisubnet
+                    --cloudkeepobject --cloudlaunchinstance --cloudpublicip)
                _get_excluded_items "${items[@]}"
                COMPREPLY=( $(compgen -W "$result" -- ${cur}) )

@@ -947,6 +998,7 @@ _VBoxManage() {
                        COMPREPLY=( $(compgen -W "manifest iso nomacs
                        nomacsbutnat" -- ${cur}) )
                        ;;
+
               esac
               [[ ${#COMPREPLY[@]} -eq 0 ]] && \
                   COMPREPLY=( $(compgen -W "${items[*]}" -- ${cur}) )
@@ -1005,11 +1057,11 @@ _VBoxManage() {
                    case "${subcommand}" in
                        run)
                            items=(--exe --timeout --unquoted-args
-                            --ignore-operhaned-processes --no-profile
+                            --ignore-operhaned-processes --profile
                            --dos2unix --unix2dos --username --domain --)

-                            [[ " ${comp_words[@]} " != *" --password "* ||
-                                " ${comp_words[@]} " != *" --passwordfile "* ]] &&
+                            [[ " ${COMP_WORDS[@]} " != *" --password "* ||
+                                " ${COMP_WORDS[@]} " != *" --passwordfile "* ]] &&
                                items+=(--passwordfile --password)
                            [[ " ${COMP_WORDS[@]} " != *" --putenv "* &&
                                " ${COMP_WORDS[@]} " != *" -E "* ]] &&
@@ -1033,11 +1085,11 @@ _VBoxManage() {

                        start)
                            items=(--exe --timeout --unquoted-args
-                            --ignore-operhaned-processes --no-profile
+                            --ignore-operhaned-processes --profile
                            --username --domain --passwordfile --password --)

-                            [[ " ${comp_words[@]} " != *" --password "* ||
-                                " ${comp_words[@]} " != *" --passwordfile "* ]] &&
+                            [[ " ${COMP_WORDS[@]} " != *" --password "* ||
+                                " ${COMP_WORDS[@]} " != *" --passwordfile "* ]] &&
                                items+=(--passwordfile --password)
                            [[ " ${COMP_WORDS[@]} " != *" --verbose "* &&
                                " ${COMP_WORDS[@]} " != *" -v "* ]] &&
@@ -1051,14 +1103,14 @@ _VBoxManage() {
                            ;;

                        copyfrom|copyto)
-                            items=(--dryrun --follow --target-directory
-                            --username --domain)
+                            items=(--follow --target-directory --username
+                                --domain)

                            [[ " ${COMP_WORDS[@]} " != *" --recursive "* &&
                                " ${COMP_WORDS[@]} " != *" -R "* ]] &&
                                items+=(--recursive -R)
-                            [[ " ${comp_words[@]} " != *" --password "* ||
-                                " ${comp_words[@]} " != *" --passwordfile "* ]] &&
+                            [[ " ${COMP_WORDS[@]} " != *" --password "* ||
+                                " ${COMP_WORDS[@]} " != *" --passwordfile "* ]] &&
                                items+=(--passwordfile --password)
                            [[ " ${COMP_WORDS[@]} " != *" --verbose "* &&
                                " ${COMP_WORDS[@]} " != *" -v "* ]] &&
@@ -1244,6 +1296,7 @@ _VBoxManage() {
                                COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                            fi
                            ;;
+
                        updatega|updateguestadditions|updateadditions)
                            items=(--source --wait-start)
                            [[ " ${COMP_WORDS[@]} " != *" --verbose "* &&
@@ -1256,6 +1309,7 @@ _VBoxManage() {
                            _get_excluded_items "${items[@]}"
                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                            ;;
+
                        watch)
                            items=()
                            [[ " ${COMP_WORDS[@]} " != *" --verbose "* &&
@@ -1269,6 +1323,7 @@ _VBoxManage() {
                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                            ;;
                    esac
+
                    case "${prev}" in
                        close)
                            items=(--verbose)
@@ -1282,7 +1337,7 @@ _VBoxManage() {
                        --image)
                            COMPREPLY=( $(compgen -- ${cur}) )
                            ;;
-                        --tmpdir)
+                        --target-directory|--tmpdir)
                            COMPREPLY=( $(compgen -o dirnames -- ${cur}) )
                            ;;
                        --source)
@@ -1293,6 +1348,9 @@ _VBoxManage() {
                                "${COMPREPLY[0]}" != *".iso" ]] && \
                                COMPREPLY[0]="${COMPREPLY[0]}/"
                            ;;
+                        --passwordfile)
+                            COMPREPLY=( $(compgen -f -- ${cur}) )
+                            ;;
                    esac
                else
                    [[ ${#COMPREPLY[@]} -eq 0 ]] && \
@@ -1395,12 +1453,40 @@ _VBoxManage() {
                _list_comp ${cur}
            else
                case "${prev}" in
-                    --long|-l)
-                        COMPREPLY=()
-                        ;;
-                    *)
+                    --sorted|-s)
                        COMPREPLY=( $(compgen -W "-l --long" -- ${cur}) )
                        ;;
+                    --long|-l)
+                        COMPREPLY=( $(compgen -W "-s --sorted" -- ${cur}) )
+                        ;;
+                    *)
+                        COMPREPLY=( $(compgen -W "-l --long -s --sorted" -- ${cur}) )
+                        ;;
+                esac
+            fi
+            ;;
+
+        mediumio)
+            if [[ ${prev} == ${cmd} ]]; then
+                _hdd_comp
+                _floppy_comp
+                _dvds_comp
+            else
+                case "${prev}" in
+                    formatfat)
+                        COMPREPLY=( $(compgen -W "--quick" -- ${cur}) )
+                        ;;
+                    cat)
+                        COMPREPLY=( $(compgen -W "--hex --offset --size
+                            --output" -- ${cur}) )
+                            ;;
+                    stream)
+                            COMPREPLY=( $(compgen -W "--forma --variant
+                                --output" -- ${cur}) )
+                                ;;
+                    *)
+                        COMPREPLY=( $(compgen -W "--password-file cat formatfat
+                            stream" -- ${cur}) )
                esac
            fi
            ;;
@@ -1467,14 +1553,12 @@ _VBoxManage() {
                            _get_excluded_items "${items[@]}"
                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                        fi
-
                        ;;
                esac
            else
                [[ ${#COMPREPLY[@]} -eq 0 ]] && \
                    COMPREPLY=( $(compgen -W "${items[*]}" -- ${cur}) )
            fi
-
            ;;

        modifymedium)
@@ -1493,7 +1577,8 @@ _VBoxManage() {
                        ;;
                    *)
                        _find_item_name 2
-                        items=(--type --autoreset --property --compact --resize)
+                        items=(--type --autoreset --property --compact --resize
+                        --move --description --setlocation)
                        _get_excluded_items "${items[@]}"
                        COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
                        case "${prev}" in
@@ -1505,6 +1590,12 @@ _VBoxManage() {
                            --autoreset)
                                COMPREPLY=( $(compgen -W "on off" -- ${cur}) )
                                ;;
+                            --move)
+                                COMPREPLY=( $(compgen -o dirnames -- ${cur}) )
+                                ;;
+                            --setlocation)
+                                COMPREPLY=( $(compgen -f -- ${cur}) )
+                                ;;
                        esac
                    ;;
                esac
@@ -1515,7 +1606,7 @@ _VBoxManage() {
            items=(--name --groups --description --ostype --iconfile --memory
            --pagefusion --vram --acpi --pciattach --pcidetach --ioapic --hpet
            --triplefaultreset --hwvirtex --nestedpaging --largepages --vtxvpid
-            --vtxux --pae --longmode --cpuidset --cpuidremove
+            --vtxux --pae --longmode --cpuid-set --cpuid-remove
            --cpuidremoveall --hardwareuuid --cpus --cpuhotplug --plugcpu
            --unplugcpu --cpuexecutioncap --rtcuseutc --graphicscontroller
            --monitorcount --accelerate3d --accelerate2dvideo --firmware
@@ -1575,15 +1666,19 @@ _VBoxManage() {
            --audiocontroller --clipboard --draganddrop --vrde --vrdeextpack
            --vrdeproperty --vrdeport --vrdeaddress --vrdeauthtype
            --vrdeauthlibrary --vrdemulticon --vrdereusecon --vrdevideochannel
-            --vrdevideochannelquality --usb --usbehci --snapshotfolder
+            --vrdevideochannelquality --usbohci --usbehci --snapshotfolder
            --teleporter --teleporterport --teleporteraddress
            --teleporterpassword --teleporterpasswordfile --tracing-enabled
            --tracing-config --tracing-allow-vm-access --usbcardreader
-            --autostart-enabled --autostart-delay --videocap --videocapscreens
-            --videocapfile --videocapres --videocaprate --videocapfps
-            --videocapmaxtime --videocapmaxsize --videocapopts --defaultfrontend
-            --cpuid-portability-level --paravirtprovider --audiocodec --usbxhci
-            --usbrename)
+            --autostart-enabled --autostart-delay --recording --recordingscreens
+            --recordingfile --recordingvideores --recordingvideorate
+            --recordingvideofps --recordingmaxtime --recordingmaxsize
+            --recordingopts --defaultfrontend --cpuid-portability-level
+            --paravirtprovider --audiocodec --usbxhci --usbrename --apic
+            --x2apic --paravirtdebug --cpu-profile --biosapic --ibpb-on-vm-entry
+            --ibpb-on-vm-exit --spec-ctrl --audioin --audioout
+            --l1d-flush-on-sched --l1d-flush-on-vm-entry --mds-clear-on-sched
+            --mds-clear-on-vm-entry --nested-hw-virt --uarttype1 --uarttype2)

            if [[ ${prev} == ${cmd} ]]; then
                _vms_comp vms
@@ -1595,10 +1690,12 @@ _VBoxManage() {
                        COMPREPLY=()
                        _group_comp
                        ;;
+
                    --ostype)
                        COMPREPLY=()
                        _os_comp
                        ;;
+
                    --pagefusion|--acpi|--ioapic|--hpet|--triplefaultreset|\
                    --hwvirtex|--nestedpaging|--largepages|--vtxvpid|--vtxux|\
                    --pae|--longmode|--cpuhotplug|--rtcuseutc|\
@@ -1617,142 +1714,214 @@ _VBoxManage() {
                    --natdnshostresolver3|--natdnshostresolver4|\
                    --natdnshostresolver5|--natdnshostresolver6|\
                    --natdnshostresolver7|--natdnshostresolver8|--vrde|\
-                    --vrdemulticon|--vrdereusecon|--vrdevideochannel|--usb|\
+                    --vrdemulticon|--vrdereusecon|--vrdevideochannel|--usbohci|\
                    --usbehci|--teleporter|--tracing-enabled|\
                    --tracing-allow-vm-access|--usbcardreader|\
-                    --autostart-enabled|--videocap|--usbxhci)
+                    --autostart-enabled|--recording|--usbxhci|--apic|--x2apic|\
+                    --ibpb-on-vm-entry|--ibpb-on-vm-exit|--spec-ctrl|--audioin|\
+                    --audioout|--l1d-flush-on-sched|--l1d-flush-on-vm-entry|\
+                    --mds-clear-on-sched|--mds-clear-on-vm-entry|\
+                    --nested-hw-virt)
                        COMPREPLY=( $(compgen -W "on off" -- ${cur}) )
                        ;;
+
                    --graphicscontroller)
-                        COMPREPLY=( $(compgen -W "none vboxvga vmsvga" \
+                        COMPREPLY=( $(compgen -W "none vboxvga vmsvga vboxsvga" \
                            -- ${cur}) )
                        ;;
+
                    --firmware)
                        COMPREPLY=( $(compgen -W "bios efi efi32 efi64" \
                            -- ${cur}) )
                        ;;
+
                    --chipset)
                        COMPREPLY=( $(compgen -W "ich9 piix3" -- ${cur}) )
                        ;;
+
                    --biosbootmenu)
                        COMPREPLY=( $(compgen -W "disabled menuonly
                        messageandmenu" -- ${cur}) )
                        ;;
+
                    --boot[1-4])
                        COMPREPLY=( $(compgen -W "none floppy dvd disk net" \
                            -- ${cur}) )
                        ;;
+
                    --nic[1-8])
                        COMPREPLY=( $(compgen -W "none null nat bridged intnet
                        hostonly generic natnetwork" -- ${cur}) )
                        ;;
+
                    --nictype[1-8])
                        COMPREPLY=( $(compgen -W "Am79C970A Am79C973 82540EM
                        82543GC 82545EM virtio" -- ${cur}) )
                        ;;
+
                    --nicpromisc[1-8])
                        COMPREPLY=( $(compgen -W "deny allow-vms allow-all" \
                            -- ${cur}) )
                        ;;
+
                    --nicbandwidthgroup[1-8])
                        COMPREPLY=()
                        _bandwidthctl_comp
                        _get_excluded_items "none"
                        COMPREPLY+=( $(compgen -W "$result" -- ${cur}) )
                        ;;
+
                    --bridgeadapter[1-8])
                        COMPREPLY=()
                        _bridgedif_comp
                        _get_excluded_items "none"
                        COMPREPLY+=( $(compgen -W "$result" -- ${cur}) )
                        ;;
+
                    --hostonlyadapter[1-8])
                        COMPREPLY=()
                        _hostonlyif_comp
                        _get_excluded_items "none"
                        COMPREPLY+=( $(compgen -W "$result" -- ${cur}) )
                        ;;
+
                    --intnet[1-8])
                        COMPREPLY=()
                        _intnet_comp
                        ;;
+
                    --nat-network[1-8])
                        COMPREPLY=()
                        _natnet_comp
                        ;;
+
                    --natnet[1-8])
                        COMPREPLY=()
                        _natnet_comp
                        ;;
+
                    --natpf[1-8])
-                        COMPREPLY+=( $(compgen -W "delete" -- ${cur}) )
+                        COMPREPLY=( $(compgen -W "delete" -- ${cur}) )
                        ;;
+
                    --nataliasmode[1-8])
-                        COMPREPLY+=( $(compgen -W "default" -- ${cur}) )
+                        COMPREPLY=( $(compgen -W "default" -- ${cur}) )
                        ;;

                    --macaddress[1-8])
-                        COMPREPLY+=( $(compgen -W "auto" -- ${cur}) )
+                        COMPREPLY=( $(compgen -W "auto" -- ${cur}) )
                        ;;
+
                    --mouse)
-                        COMPREPLY+=( $(compgen -W "ps2 usb usbtablet
+                        COMPREPLY=( $(compgen -W "ps2 usb usbtablet
                        usbmultitouch" -- ${cur}) )
                        ;;
+
                    --keyboard)
-                        COMPREPLY+=( $(compgen -W "ps2 usb" -- ${cur}) )
+                        COMPREPLY=( $(compgen -W "ps2 usb" -- ${cur}) )
                        ;;

                    --uart[1-2]|--lpt[1-2])
-                        COMPREPLY+=( $(compgen -W "off" -- ${cur}) )
+                        COMPREPLY=( $(compgen -W "off" -- ${cur}) )
                        ;;
+
                    --uartmode[1-2])
-                        COMPREPLY+=( $(compgen -W "disconnected server client
+                        COMPREPLY=( $(compgen -W "disconnected server client
                        tcpserver tcpclient file" -- ${cur}) )
                        ;;
+
+                    --uarttype[1-2])
+                        COMPREPLY=( $(compgen -W "16450 16550A
+                        16750" -- ${cur}) )
+                        ;;
+
                    --audio)
-                        COMPREPLY+=( $(compgen -W "none null oss alsa pulse" \
+                        COMPREPLY=( $(compgen -W "none null oss alsa pulse" \
                            -- ${cur}) )
                        ;;

                    --audiocontroller)
-                        COMPREPLY+=( $(compgen -W "ac97 hda sb16" -- ${cur}) )
+                        COMPREPLY=( $(compgen -W "ac97 hda sb16" -- ${cur}) )
                        ;;

                    --audiocodec)
-                        COMPREPLY+=( $(compgen -W "stac9700 ad1980 stac9221
+                        COMPREPLY=( $(compgen -W "stac9700 ad1980 stac9221
                        sb16" -- ${cur}) )
                        ;;

                    --clipboard)
-                        COMPREPLY+=( $(compgen -W "disabled hosttoguest
+                        COMPREPLY=( $(compgen -W "disabled hosttoguest
                        guesttohost bidirectional" -- ${cur}) )
                        ;;
+
                    --draganddrop)
-                        COMPREPLY+=( $(compgen -W "disabled hosttoguest" \
-                            -- ${cur}) )
+                        COMPREPLY=( $(compgen -W "disabled hosttoguest
+                        guesttohost bidirectional" -- ${cur}) )
                        ;;

                    --vrdeextpack|--vrdeauthlibrary|--snapshotfolder|\
                        --defaultfrontend)
-                        COMPREPLY+=( $(compgen -W "default" -- ${cur}) )
+                        COMPREPLY=( $(compgen -W "default" -- ${cur}) )
                        ;;
+
                    --vrdeauthtype)
-                        COMPREPLY+=( $(compgen -W "null external guest" \
+                        COMPREPLY=( $(compgen -W "null external guest" \
                            -- ${cur}) )
                        ;;
+
                    --paravirtprovider)
                        COMPREPLY=( $(compgen -W "none default legacy minimal
                        hyperv kvm" -- ${cur}) )
                        ;;
+
                    --cpuid-portability-level)
                        COMPREPLY=( $(compgen -W "0 1 2 3" -- ${cur}) )
                        ;;
+
+                    --cpu-profile)
+                        COMPREPLY=( $(compgen -W "host 8086 80286 80386" \
+                            -- ${cur}) )
+                        ;;
+
+                    --biosapic)
+                        COMPREPLY=( $(compgen -W "disabled apic x2apic" \
+                            -- ${cur}) )
+                        ;;
+                    --teleporterpasswordfile|--iconfile|--recordingfile)
+                        COMPREPLY=( $(compgen -f -- ${cur}) )
+                        ;;
+                    --nictracefile[1-8])
+                        COMPREPLY=( $(compgen -f -- ${cur}) )
+                        ;;
+                    --nattftpfile[1-8])
+                        COMPREPLY=( $(compgen -f -- ${cur}) )
+                        ;;
+                esac
+            fi
+            ;;
+
+        movevm)
+            if [[ ${prev} == ${cmd} ]]; then
+                _vms_comp vms
+            else
+                _find_item_name 2
+                items=(--type --folder)
+                _get_excluded_items "${items[@]}"
+                COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
+                case "${prev}" in
+                    --type)
+                        COMPREPLY=( $(compgen -W "basic" -- ${cur}) )
+                        _snapshot_comp
+                        ;;
+                    --folder)
+                        COMPREPLY=( $(compgen -f -- ${cur}) )
+                        ;;
                esac
            fi
            ;;

        natnetwork)
-            items=(add remove modify start stop)
+            items=(add remove modify start stop list)
            subcommand=${COMP_WORDS[2]}
            if [[ "${prev}" == "--netname" ]]; then
                _natnet_comp
@@ -1803,7 +1972,7 @@ _VBoxManage() {
        setproperty)
            items=(machinefolder hwvirtexclusive vrdeauthlibrary
            websrvauthlibrary vrdeextpack autostartdbpath loghistorycount
-            defaultfrontend logginglevel)
+            defaultfrontend logginglevel proxymode proxyurl)
            subcommand=${COMP_WORDS[2]}
            if [[ "${prev}" == "${cmd}" ]]; then
                COMPREPLY=( $(compgen -W "${items[*]}" -- ${cur}) )
@@ -1830,6 +1999,10 @@ _VBoxManage() {
                    defaultfrontend)
                        COMPREPLY=( $(compgen -W "null" -- ${cur}) )
                        ;;
+                    proxymode)
+                        COMPREPLY=( $(compgen -W "system noproxy
+                            manual" -- ${cur}) )
+                        ;;
                esac
            fi
            ;;
@@ -1870,6 +2043,7 @@ _VBoxManage() {
            [[ ${#COMPREPLY[@]} -eq 0 ]] && \
                COMPREPLY=( $(compgen -W "${items[*]}" -- ${cur}) )
            ;;
+
        showmediuminfo)
            if [[ ${prev} == ${cmd} ]]; then
                COMPREPLY=( $(compgen -W "disk dvd floppy" -- ${cur}) )
@@ -1965,7 +2139,13 @@ _VBoxManage() {
            elif [[ "${prev}" == "--type" ]]; then
                COMPREPLY=( $(compgen -W "gui sdl headless separate" -- ${cur}) )
            else
+                local items=(--putenv -E)
+                _is_any_item_used "${items[@]}"
+                if [[ "${result}" == "ITIS" ]]; then
                    local items=(--type)
+                else
+                    local items=(--type -E --putenv)
+                fi
                _get_excluded_items "${items[@]}"
                COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
            fi
@@ -1980,7 +2160,7 @@ _VBoxManage() {
                --comment --setuuid --setparentuuid --passthrough --tempeject
                --nonrotational --discard --hotpluggable --bandwidthgroup
                --forceunmount --server --target --tport --lun --encodedlun
-                --username --password --initiator --intnet)
+                --username --password --initiator --intnet --passwordfile)
                _get_excluded_items "${items[@]}"
                COMPREPLY=( $(compgen -W "$result" -- ${cur}) )

@@ -2006,6 +2186,9 @@ _VBoxManage() {
                    --passthrough|--tempeject|--nonrotational|--discard)
                        COMPREPLY=( $(compgen -W "on off" -- ${cur}) )
                        ;;
+                    --passwordfile)
+                        COMPREPLY=( $(compgen -f -- ${cur}) )
+                        ;;
                esac
            fi
            ;;
@@ -2021,11 +2204,11 @@ _VBoxManage() {
                case "${prev}" in
                    --add)
                        COMPREPLY=( $(compgen -W "ide sata scsi floppy
-                        sas" -- ${cur}) )
+                        sas usb pcie" -- ${cur}) )
                        ;;
                    --controller)
                        COMPREPLY=( $(compgen -W "LSILogic LSILogicSAS BusLogic
-                        IntelAHCI PIIX3 PIIX4 ICH6 I82078" -- ${cur}) )
+                        IntelAHCI PIIX3 PIIX4 ICH6 I82078 USB NVMe" -- ${cur}) )
                        ;;
                    --bootable|--hostiocache)
                        COMPREPLY=( $(compgen -W "on off" -- ${cur}) )
@@ -2044,7 +2227,7 @@ _VBoxManage() {
            fi
            ;;

-        usbfilte)
+        usbfilter)
            if [[ COMP_CWORD -ge 3 ]]; then
                subcommand="${COMP_WORDS[2]}"
                if [[ $subcommand == "${cmd}" ]]; then
@@ -2085,8 +2268,92 @@ _VBoxManage() {
                fi
            fi
            ;;
+
+        usbdevsource)
+            if [[ COMP_CWORD -ge 3 ]]; then
+                subcommand="${COMP_WORDS[2]}"
+                if [[ $subcommand == "${cmd}" ]]; then
+                    subcommand="${COMP_WORDS[3]}"
+                fi
+            fi
+
+            if [[ ${prev} == ${cmd} ]]; then
+                COMPREPLY=( $(compgen -W "add remove" -- ${cur}) )
+            else
+                if [[ ${#COMPREPLY[@]} -eq 0 ]]; then
+                    case "${subcommand}" in
+                        add)
+                            local items=(--address --backend)
+                            _get_excluded_items "${items[@]}"
+                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
+                            ;;
+                    esac
+                fi
+            fi
+            ;;
+
+        unattended)
+            if [[ COMP_CWORD -ge 3 ]]; then
+                subcommand="${COMP_WORDS[2]}"
+                if [[ $subcommand == "${cmd}" ]]; then
+                    subcommand="${COMP_WORDS[3]}"
+                fi
+            fi
+
+            if [[ ${prev} == ${cmd} ]]; then
+                COMPREPLY=( $(compgen -W "detect install" -- ${cur}) )
+            else
+                case "${prev}" in
+                    --iso|--password-file|--additions-iso|--validation-kit-iso|\
+                        --script-template|--post-install-template)
+                        COMPREPLY+=( $(compgen -f -- ${cur}) )
+                        ;;
+                    --auxiliary-base-path)
+                        COMPREPLY+=( $(compgen -o dirnames -- ${cur}) )
+                        ;;
+                    --start-vm)
+                        COMPREPLY=( $(compgen -W "gui sdl headless separate" \
+                            -- ${cur}) )
+                        ;;
+                esac
+
+                if [[ ${#COMPREPLY[@]} -eq 0 ]]; then
+                    case "${subcommand}" in
+                        detect)
+                            local items=(--iso --machine-readable)
+                            _get_excluded_items "${items[@]}"
+                            COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
+                            ;;
+                        install)
+                            if [[ ${prev} == ${subcommand} ]]; then
+                                _vms_comp vms
+                            else
+                                local items=(--iso --user=login
+                                --password=password --password-file
+                                --full-user-name --key
+                                --install-additions --no-install-additions
+                                --additions-iso --install-txs --no-install-txs
+                                --validation-kit-iso --locale --country
+                                --time-zone --hostname
+                                --package-selection-adjustment --dry-run
+                                --auxiliary-base-path=path --image-index
+                                --script-template --post-install-template
+                                --post-install-command
+                                --extra-install-kernel-parameters --language
+                                --start-vm)
+                                _get_excluded_items "${items[@]}"
+                                COMPREPLY=( $(compgen -W "$result" -- ${cur}) )
+                            fi
+                            ;;
+                    esac
+                fi
+
+            fi
+            ;;
+
    esac
 }
 complete -o default -F _VBoxManage VBoxManage
+complete -o default -F _VBoxManage vboxmanage

 # vim: set ft=sh tw=80 sw=4 et :
Author	SHA1	Message	Date
gryf	c8301459df	Command extapck will be available on topmost completion again.	2019-12-22 19:06:05 +01:00
gryf	ab0cc7aea4	Fixes for modifyvm options completion.	2019-12-22 19:03:09 +01:00
gryf	f73e80c7ad	Fixed list command	2019-12-22 19:03:09 +01:00
gryf	10900543fa	Bump to version 6.0.12. Changed videocap to recording in modifyvm and controlvm, changed from usb to usbohci in modifyvm command, added new movevm and mediumio commands and cloud related options.	2019-12-22 19:02:50 +01:00
gryf	1be3e589d4	Bump to 5.2.32 version	2019-09-16 07:24:42 +02:00
gryf	9c5b048c62	Bump to 5.2.26 Added guesttohost and bidirectional parameters for --draganddrop option for both: controlvm and modifyvm.	2019-04-23 19:14:39 +02:00
gryf	5fd18d7cec	Removed redundant --videocapopts from modifyvm	2019-04-23 19:14:39 +02:00
Roman Dobosz	05af06f337	Merge pull request #7 from schplurtz/comp_words change comp_words to upper case	2019-02-19 19:21:21 +01:00
Roman Dobosz	cde78c8e4c	Merge pull request #6 from schplurtz/snaplist handle snapshot completion entirely with awk	2019-02-19 19:19:39 +01:00
Schplurtz le Déboulonné	197c46cd35	change comp_words to upper case	2019-02-19 10:58:37 +01:00
Christophe Martin	296be19560	handle snapshot completion entirely with awk fixes #5 Also list and complete snapshot uuid.	2019-02-19 10:41:23 +01:00
gryf	62f57ebbb7	Added level 1 data cache options. New options are added to modifyvm command: - --l1d-flush-on-sched - --l1d-flush-on-vm-entry	2018-11-28 20:21:06 +01:00
gryf	d4f56a0d6b	Added unattended command.	2018-09-09 15:58:14 +02:00
gryf	f8b5981935	Corrected file/dir completions.	2018-09-08 17:41:02 +02:00
gryf	d027094e7c	Added new options for commands. In version 5.2.14 of VirtualBox, new options for following commands has been added. Adjusted completion accordingly. - list (-s\|--sorted) - modifyvm (--cpiudset -> --cpuid-set, --cpuidremove -> --cpuid-remove, --audioin, --audioout) - export (new file format choice: --opc10) - startvm (-E\|--putenv) - conrolvm (keyboardputstring, keyboardputfile, audioin, audioout) - storageattach (--passwordfile) - modifymedium (--description)	2018-09-08 16:47:50 +02:00
gryf	e90270e8ee	Added speculation control to modifyvm command	2018-05-27 17:56:19 +02:00
gryf	11a0844c4d	Added two new options for modifyvm New options was added to VBoxManage in verstion 5.1.32: * --ibpb-on-vm-exit * --ibpb-on-vm-entry	2018-01-24 19:10:45 +01:00
gryf	9b06c430fd	Added new subcommand for debugvm VBoxManage removed "debug" from list of commands in help, leaving only description for "debugvm" in section "Introspection and guest debugging" below all of the list, so that it is needed for adding "debugvm" to the list of available commands manually. Also "stack", new subcommand was added to "debugvm".	2017-10-08 10:20:27 +02:00
gryf	fbdd259cac	Added support for usbdevsource command	2017-10-08 09:11:20 +02:00
gryf	d79a8bc280	Whitespaces housekeeping	2017-10-08 09:03:11 +02:00
gryf	20b1ef9fab	Fix for catching usbfilter command	2017-10-08 09:01:25 +02:00
gryf	1674acbe92	Aded 'list' for natnetwork command	2017-10-07 19:29:22 +02:00
gryf	9b7ab10421	Command modifymedium have now additional option --move	2017-10-07 19:28:22 +02:00
gryf	47e3ff6bbe	Added more options for storagectl option options --add and --controller now have additional options: usb pcie for `--add` and USB NVMe for `--controller'.	2017-10-07 19:26:17 +02:00
gryf	f81bfe514f	Modified 'modifyvm' command Added new options for modifyvm command: --apic --x2apic --paravirtdebug --cpu-profile --biosapic	2017-10-07 19:22:28 +02:00
gryf	a78a03286a	Changed option '--no-profile' to '--profile' in gustecontrol run command	2017-10-07 19:21:36 +02:00
gryf	04fba0a65a	Bumped supported VirtualBox version	2017-07-29 09:19:23 +02:00
gryf	26eeb62a6d	Added alias for lowercase 'vboxmanage' support	2017-01-31 19:17:15 +01:00