Experimental: Apply changes involving setup.py

* Added setup.py from trunk
 * Updated various information files (AUTHORS, README, etc)
 * Update the Wicd icon
 * Move stuff around to match trunk's layout

man/wicd-manager-settings.conf.5

@@ -0,0 +1,91 @@
+.\" Written by Robby Workman <rworkman@slackware.com>
+.TH WICD-MANAGER-SETTINGS.CONF 5 "June 2008" "wicd-1.5.0"
+.SH NAME
+wicd-manager-settings.conf \- contains settings that control Wicd's behavior
+
+.SH DESCRIPTION
+
+This file contains general configuration information for Wicd.
+.br
+This file is located at /etc/wicd/manager-settings.conf
+
+.SH SETTINGS
+
+.TP
+.BI "link_detect_tool = " <0|1|2>
+0 = autodetect
+.br
+1 = ethtool
+.br
+2 = mii-tool
+.TP
+.BI "flush_tool = " <0|1|2>
+0 = autodetect
+.br
+1 = ip
+.br
+2 = route
+.TP
+.BI "signal_display_type = " <0|1>
+0 = Show signal strength as a percentage
+.br
+1 = Show signal strength in dBm
+.TP
+.BI "dhcp_client = " <0|1|2|3>
+0 = autodetect
+.br
+1 = dhclient
+.br
+2 = dhcpcd
+3 = pump
+.TP
+.BI "wired_interface = " <interface_name>
+.TP
+.BI "always_show_wired_interface = " <True|False>
+.TP
+.BI "wired_connect_mode = " <0|1>
+0 = connect to wired interface automatically
+.br
+1 = do not connect to wired interface automatically
+.TP
+.BI "wireless_interface = " <name_of_wireless_interface>
+.TP
+.BI "wpa_driver = " <wext|madwifi|ndiswrapper|hostap|hermes|atmel|broadcom|ipw|ralink legacy>
+The default (and best supported) is wext.  It should work properly in most cases.
+.TP
+.BI "auto_reconnect = " <True|False>
+This settings determines whether Wicd will attempt to reconnect on connection loss.
+.TP
+.BI "use_global_dns = " <True|False>
+If set to "True" and values are specified in the global DNS settings below,
+this will cause Wicd to use these DNS settings.
+.TP
+.BI "global_dns_1 = " <ip_address>
+.TP
+.BI "global_dns_2 = " <ip_address>
+.TP
+.BI "global_dns_3 = " <ip_address>
+.TP
+.BI "debug_mode = " <integer_value>
+0 = disabled
+.br
+1 = enabled
+.TP
+.BI "window_height = " <integer_value> " (in pixels)"
+This determines the height of the client window.
+.TP
+.BI "window_width = " <integer_value> " (in pixels)"
+This determines the width of the client window.
+.TP
+.BI "pref_height = " <integer_value> " (in pixels)"
+This determines the height of the "Preferences" window when launched from the client.
+.TP
+.BI "pref_width = " <integer_value> " (in pixels)"
+This determines the width of the "Preferences" window when launched from the client.
+
+
+.SH "SEE ALSO"
+.BR wicd (8),
+.BR wicd-wired-settings.conf (5),
+.BR wicd-wireless-settings.conf (5).
+