Experimental: Apply changes involving setup.py

* Added setup.py from trunk
 * Updated various information files (AUTHORS, README, etc)
 * Update the Wicd icon
 * Move stuff around to match trunk's layout

AUTHORS

@@ -0,0 +1,2 @@
+Adam Blackburn (compwiz18@users.sourceforge.net)
+Dan O'Reilly (oreilldf@gmail.com)

CHANGES

@@ -0,0 +1,35 @@
+1.5.0
+ * Added support for pump and dhcpcd
+ * Added wep-hex, wep-passphrase, eap-tls, and wep-shared encryption templates
+ * Autoconnect falls back to wireless if wired connection fails for any reason
+ * Fixed a memory leak
+ * Added ability to put interfaces up/down via the GUI
+ * Reduced number of external program calls for improved memory usage
+ * Added support for using one set of settings for all networks with an ESSID
+ * Made debugging output less spammy and more helpful
+ * Made GUI more responsive
+ * Added README and INSTALL
+ * Added setup.py install script
+ * Improved automatic reconnection
+ * Added option to disable tray animations
+ * Added distro-specific init scripts when installed from source
+ * Added PID file that is created on daemon start and destroyed on SIGTERM
+ * Allow resizing of Preference window and main window
+ * Added support for getting interface names from /proc/net/wireless
+ * Added a Disconnect button
+ * Added MAC address to network information that is always visible
+ * Requires root permissions to edit pre/post/disconnection scripts
+ * Daemon process is now renamed "wicd" and GUI is renamed "wicd-client"
+ * Added support for kdesu and ktsuss as well as gksudo
+ * Added ability to restart and print usage to init file
+ * Renamed desktop file "wicd.desktop"
+ * Change directory structure to be FHS compliant and customizable
+ * Added desktop file for autostarting
+ * Rewrote init file for Debian from /etc/init.d/skeleton
+ * Added manpages for the configuration files and daemon
+ * Added INSTALL, LICENSE, AUTHORS, README, and CHANGELOG
+ * Created new SVG icon and updated PNG icons accordingly
+ * Added --no-poll option to daemon which prevents polling of data
+ * Fixed various permissions issues
+ * Added wired-default profile for automatic DHCP on ethernet by default
+ * Changed log file permissions to 0600

INSTALL

@@ -1,14 +1,39 @@
-To install, just run:
+Installation of Wicd should be done using your distribution package if one
-sudo python setup.py install
+exists.  If not, the installation is relatively straightforward.
 
-For now almost all the files and directories are dumped to /opt/wicd, though
+If you are installing from a subversion pull or beta/rc tarball and you want 
-it's possible for the user to specify a different directory by editing two files;
+the native language translations, first run this:
-setup.cfg, and wpath.py.  Simply change all mentions of /opt/wicd in those files
+  python setup.py get_translations
-to the directory of your choice.
+You will not need to do this if you're installing from a release tarball.
 
-It should also be noted that wicd also installs some files elsewhere, namely
+Next, configure Wicd for installation.  Wicd will, by default, follow the 
-init.d and suspend.d scripts, dbus configuration files, and pixmaps.  Exactly
+FHS guidelines <http://www.pathname.com/fhs/> (or distribution standards 
-what gets put where can be viewed by opening up and reading setup.py.
+where applicable if we know about them and it's feasible to implement them).
+You can specify exactly where every non-Python file (and some Python files) 
+in Wicd will be placed.  Pass "--help" as an option to the following command
+for more information, otherwise run it as is to configure Wicd for installation.
+  python setup.py configure
+
+Finally, do the actual installation.  This step will need to be done as
+root or with sudo in most cases:
+  python setup.py install
+If you are packaging Wicd, you will almost surely want to use the "--root"
+option; for example:
+  python setup.py install --root=/package-dir
+
+To uninstall, you can use (using root or sudo):
+  python setup.py uninstall
+
+You *MUST* run "python setup.py configure" before "python setup.py install" -
+the "configure" step generates wpath.py from wpath.py.in using the paths 
+specified from the arguments to "python setup.py configure". 
+As noted above in the configure step, "python setup.py configure" will use 
+acceptable defaults, so it is usually not necessary to specify any arguments 
+at all.
+
+After installation, especially if Wicd has not been installed before, you 
+will probably need to restart the system message bus (dbus) or reload its 
+configuration.  You will also need to make sure the Wicd init script is
+started at boot.  How to do those things is distribution-dependent, so if 
+you're not sure, ask in your distribution's support area(s).
 
-In the (near) future, all the files will not all be put in one directory, and will
-instead follow linux standards for directory structure.

LICENSE

@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.
+

MANIFEST.in

@@ -1,7 +0,0 @@
-include data/wicd.glade
-include data/wicd.png
-recursive-include other *
-recursive-include encryption *
-recursive-include images *
-recursive-include translations *
-include launchdaemon.sh

README

@@ -1,59 +1,63 @@
 THEORY OF OPERATION:
 
-Wicd is designed to give the user as much control over the behavior of network connections
+Wicd is designed to give the user as much control over behavior of network 
-as possible.  Every network, both wired and wireless, has its own profile, with its own
+connections as possible.  Every network, both wired and wireless, has its 
-configuration options and connection behavior.  Wicd will try to automatically connect
+own profile with its own configuration options and connection behavior.  
-only to the networks the user specifies it should try, with a preference first to a wired
+Wicd will try to automatically connect only to networks the user specifies 
-network, then to wireless.
+it should try, with a preference first to a wired network, then to wireless.
 
-For wired connections, users have several options for determining what network settings to
+For wired connections, users have many options for determining what network 
-use.  Wicd allows creation of an unlimited amount of wired profiles, which each have
+settings to use.  Wicd allows creation of an unlimited number of wired 
-their own unique settings.  The user can choose to automatically connect to a selected
+profiles, each of which has its own unique settings.  The user can choose to 
-default profile, choose a profile from a pop-up window every time wicd connects, or
+automatically connect to a selected default profile, choose a profile from a 
-have wicd automatically choose the last profile used to manually connect.
+pop-up window every time wicd connects, or have wicd automatically choose the
+last profile used to manually connect.
 
-For wireless networks, users can select any number of wireless networks to automatically
+For wireless connections, users can select any number of wireless networks
-connect to, from which wicd will choose the one with the highest signal strength to try
+to automatically connect; wicd will choose the one with the highest signal 
-to connect.
+strength to try to connect.
 
-If the user chooses, wicd will try to automatically reconnect when wicd detects a
+If the user chooses, wicd will try to automatically reconnect when it detects
-connection is lost.  If the last known connection state is wired, wicd will try
+that a connection is lost.  If the last known connection state is wired, wicd
-to first reconnect to the wired network, and if it is not available, will try
+will first try to reconnect to the wired network, and if it is not available, 
-any available wireless networks with automatic connection enabled.  If the last
+wicd will try any available wireless networks which have automatic connection 
-known connection state is wireless, wicd will first try to reconnect to the
+enabled.  If the last known connection state is wireless, wicd will first try
-last network it was connected to (even if it not set to automatically connect
+to reconnect to the previously connected network (even if that network does 
-to that network normally), and should that fail will try both a wired connection
+not have automatic connection enabled), and should that fail, it will try both
-and any available wireless networks set to automatically connect.
+a wired connection and any available wireless networks which have automatic
+connection enabled.
 
 Wicd uses built-in linux wireless-tools, such as ifconfig and iwconfig, to
 get and configure network info.  There is some flexibility in its use of DHCP,
 providing support for dhclient, dhcpcd, and pump.  Wicd uses wpa_supplicant
 to handle all wireless encryption settings, and uses a template-based system
-to create the configuration files wpa_supplicant uses.  These templates can
+to create the configuration files used by wpa_supplicant.  These templates 
-be editted and new templates can be created and imported into wicd by the user,
+can be edited, and new templates can be created by the user and imported into
-allowing connection to networks with uncommon encryption settings.
+wicd, allowing connection to networks with uncommon encryption settings.
-
 
 
 STRUCTURE:
 
-There are two major parts to wicd; the daemon, which runs at the root level, and the
+Wicd has two major parts: the daemon, which runs with root privileges; and the
-user-interface, which runs at the user level.  The two parts run as separate processes,
+user interface, which runs with normal user privileges.  The two parts run as
-and make use of D-Bus to communicate.
+separate processes and make use of D-Bus to communicate.
 
-The daemon is responsible for making and configuring connections, reading/writing 
+The daemon is responsible for making and configuring connections, reading and
-configuration files and logs, and monitoring the connection status.  The daemon's job 
+writing configuration files and logs, and monitoring the connection status.  
-is split between two processes, daemon.py and monitor.py.  All the connection status 
+The daemon's job is split between two processes: daemon.py and monitor.py.  
-monitoring, as well as the auto-reconnection logic, takes place in monitor.py.  
+All the connection status monitoring, as well as the auto-reconnection logic,
-Everthing else is done by daemon.py.
+takes place in monitor.py.  Everthing else is done by wicd-daemon.py.
 
-The user-interface (stored in wicd.py), made up of a tray icon, main GUI window, and its child dialogs, 
+The user interface (stored in wicd-client.py), which is made up of a tray 
-gets configuration and network information from the daemon by either querying it, using 
+icon, a main GUI window, and its child dialogs, gets configuration and network 
-the methods in the daemon's dbus interface, or by receiving signals emitted from the daemon 
+info from the daemon either by querying it using the methods in the daemon's 
-over D-Bus.  Any configuration changes made in the UI are passed back to the daemon, which
+dbus interface or by receiving signals emitted from the daemon over D-Bus.  
-actually applies the changes and writes them to configuration files.
+Any configuration changes made in the user interface are passed back to the
+daemon, which actually applies the changes and writes them to configuration
+files.
+
+Since the user interface just queries for connection and configuration info 
+from the daemon, it is possible to run wicd without the GUI at all.  Also, 
+the daemon is started by wicd's init script during system startup (before any
+user logs in), making it possible to use wicd with "headless" machines.
 
-Since the GUI just queries for connection and configuration information from the daemon
-it is possible to run wicd without the GUI at all.  Additionally, the daemon is started by
-wicd's init script as soon as Linux loads, and before any user logs in, making it possible to 
-use with "headless" machines.

dbusmanager.py

@@ -1,49 +0,0 @@
-#!/usr/bin/env python
-
-""" The wicd DBus Manager.
-
-A module for storing wicd's dbus interfaces.
-
-"""
-
-#
-#   Copyright (C) 2007 Adam Blackburn
-#   Copyright (C) 2007 Dan O'Reilly
-#
-#   This program is free software; you can redistribute it and/or modify
-#   it under the terms of the GNU General Public License Version 2 as
-#   published by the Free Software Foundation.
-#
-#   This program is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#   GNU General Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License
-#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-import dbus
-
-class DBusManager(object):
-    def __init__(self):
-        self._bus = dbus.SystemBus()
-        self._dbus_ifaces = {}  
-    
-    def get_dbus_ifaces(self):
-        """ Returns a dict of dbus interfaces. """
-        return self._dbus_ifaces
-    
-    def get_bus(self):
-        """ Returns the loaded SystemBus. """
-        return self._bus
-    
-    def connect_to_dbus(self):
-        """ Connects to wicd's dbus interfaces and loads them into a dict. """
-        proxy_obj = self._bus.get_object("org.wicd.daemon", '/org/wicd/daemon')
-        daemon = dbus.Interface(proxy_obj, 'org.wicd.daemon')
-        wireless = dbus.Interface(proxy_obj, 'org.wicd.daemon.wireless')
-        wired = dbus.Interface(proxy_obj, 'org.wicd.daemon.wired')
-        config = dbus.Interface(proxy_obj, 'org.wicd.daemon.config')
-        self._dbus_ifaces = {"daemon" : daemon, "wireless" : wireless,
-                             "wired" : wired, "config" : config} 

images/wicd.png

@@ -1 +0,0 @@
-link wicd-purple.png

in/init=arch=wicd.in

@@ -0,0 +1,33 @@
+#!/bin/bash
+
+# borrowed from
+# http://repos.archlinux.org/viewvc.cgi/wicd/repos/extra-i686/wicd-daemon?revision=1&view=markup
+# and modified for 1.5.0
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+case "$1" in
+  start)
+    stat_busy "Starting wicd Daemon"
+    killall wicd &> /dev/null
+    %SBIN%wicd-daemon &> /dev/null
+    add_daemon wicd
+    stat_done
+    ;;
+  stop)
+    stat_busy "Stopping wicd Daemon"
+    killall wicd &> /dev/null
+    rm_daemon wicd
+    stat_done
+    ;;
+  restart)
+    $0 stop
+    sleep 1
+    $0 start
+    ;;
+  *)
+    echo "usage: $0 {start|stop|restart}"  
+esac
+exit 0
+

in/init=debian=wicd.in

@@ -0,0 +1,159 @@
+#! /bin/sh
+### BEGIN INIT INFO
+# Provides:          wicd
+# Required-Start:    dbus
+# Required-Stop:     
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Starts and stops Wicd
+# Description:       Starts and stops Wicd, a network manager
+### END INIT INFO
+
+# Author: Adam Blackburn <compwiz18@users.sourceforge.net>
+#
+
+# Do NOT "set -e"
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/usr/sbin:/usr/bin:/sbin:/bin
+DESC="Network connection manager"
+NAME=wicd
+DAEMON=%SBIN%$NAME
+DAEMON_ARGS=""
+PIDFILE=%PIDFILE%
+SCRIPTNAME=%INIT%%INITFILENAME%
+
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+[ -f /etc/default/rcS ] && . /etc/default/rcS
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+# Perhaps not the best idea
+# but a confirmation is nice
+# when starting/stopping the daemon
+VERBOSE=yes
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	#   vvvv -- don't do this -- vvvv
+	#   [ -e $PIDFILE ] && return 1
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON -- \
+		$DAEMON_ARGS > /dev/null 2> /dev/null\
+		|| return 2
+	# Add code here, if necessary, that waits for the process to be ready
+	# to handle requests from services started subsequently which depend
+	# on this one.  As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	# Many daemons don't delete their pidfiles when they exit.
+	rm -f $PIDFILE
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+  start)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+	do_start
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  #reload|force-reload)
+	#
+	# If do_reload() is not implemented then leave this commented out
+	# and leave 'force-reload' as an alias for 'restart'.
+	#
+	#log_daemon_msg "Reloading $DESC" "$NAME"
+	#do_reload
+	#log_end_msg $?
+	#;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+	  	# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+  *)
+	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+	echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
+	exit 3
+	;;
+esac
+
+:

in/init=default=wicd.in

@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# /etc/init.d/wicd
+# Start/stop/restart the Wicd daemon
+# Modified the Slackware default init script for use
+# where the distro is not detected.
+
+# This is defined in /usr/lib/python2.5/site-packages/wicd/wpath.py
+PIDFILE="%PIDFILE%"
+
+# Define start and stop functions
+
+wicd_start() {
+  if [ -e $PIDFILE ]; then
+    echo "Wicd appears to already be running."
+    echo "If this is not the case, then remove "
+    echo "$PIDFILE and try again..."
+    exit 1
+  else
+    echo "Starting wicd daemon..."
+    %SBIN%wicd 2>/dev/null 1>&2
+  fi
+}
+
+wicd_stop() {
+  echo "Stopping wicd daemon..."
+  if [ -e $PIDFILE ]; then
+    kill $(cat $PIDFILE) 2>/dev/null
+    rm -f $PIDFILE 2>/dev/null
+  else
+    killall wicd-client 2>/dev/null
+  fi
+}
+
+# See how we were called and take appropriate action	
+
+case $1 in
+  start)
+    wicd_start
+   ;;
+  stop)
+    wicd_stop
+   ;;
+  restart)
+    wicd_stop
+    wicd_start
+   ;;
+  *)
+    echo "Usage: $0 {start|stop|restart}"
+    exit 1
+   ;;
+esac
+

in/init=gentoo=wicd.in

@@ -0,0 +1,24 @@
+#!/sbin/runscript
+# Copyright 1999-2006 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+opts="start stop restart"
+
+WICD_DAEMON=%SBIN%wicd
+WICD_PIDFILE=%PIDFILE%
+
+depend() {
+	need dbus
+}
+
+start() {
+	ebegin "Starting wicd daemon"
+	$WICD_DAEMON &>/dev/null
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping wicd daemon"
+	start-stop-daemon --stop --pidfile "$WICD_PIDFILE"
+	eend $?
+}

in/init=pld=wicd.in

@@ -0,0 +1,88 @@
+#!/bin/sh
+#
+# wicd	wicd wireless connection daemon
+#
+# chkconfig:	345 99 01
+#
+# description:	wicd wireless connection daemon
+#
+# processname:	wicd
+# config:
+# pidfile: /var/run/wicd.pid
+#
+# $Id: template.init 9689 2008-03-27 16:15:39Z patrys $
+
+# Source function library
+. /etc/rc.d/init.d/functions
+
+
+# Get service config - may override defaults
+# [ -f /etc/sysconfig/wicd ] && . /etc/sysconfig/wicd
+
+WICD_BIN=%SBIN%wicd
+
+start() {
+	# Check if the service is already running?
+	if [ ! -f /var/lock/subsys/wicd ]; then
+		msg_starting wicd
+		daemon $WICD_BIN
+		RETVAL=$?
+		[ $RETVAL -eq 0 ] && touch /var/lock/subsys/wicd
+	else
+		msg_already_running wicd
+	fi
+}
+
+stop() {
+	if [ -f /var/lock/subsys/wicd ]; then
+		# Stop daemons.
+		msg_stopping wicd
+		# killproc wicd
+		killproc --pidfile /var/run/wicd.pid wicd -TERM
+		rm -f /var/lock/subsys/wicd
+	else
+		msg_not_running wicd
+	fi
+}
+
+
+condrestart() {
+	if [ -f /var/lock/subsys/wicd ]; then
+		stop
+		start
+	else
+		msg_not_running wicd
+		RETVAL=$1
+	fi
+}
+
+RETVAL=0
+# See how we were called.
+case "$1" in
+  start)
+  	start
+	;;
+  stop)
+  	stop
+	;;
+  restart)
+	stop
+	start
+	;;
+  try-restart)
+	condrestart 0
+	;;
+# use this one if program doesn't support reloading without restart
+  force-reload)
+	condrestart 7
+	;;
+  status)
+	status wicd
+	RETVAL=$?
+	;;
+  *)
+	msg_usage "$0 {start|stop|restart|try-restart|reload|force-reload|status}"
+	exit 3
+esac
+
+exit $RETVAL

in/init=redhat=wicd.in

@@ -0,0 +1,43 @@
+#! /bin/sh
+#
+# /etc/init.d/wicd
+#
+# chkconfig: - 98 02
+# description: Wicd is a wireless and wired network manager for Linux.
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# This script was borrowed from the Wicd wiki page on building for Fedora
+# http://wicd.net/wiki/doku.php?id=fedora
+
+WICD_BIN=%SBIN%wicd
+
+case "$1" in
+        start)
+                echo -n "Starting wicd services: "
+                daemon $WICD_BIN 2> /dev/null
+                touch /var/lock/subsys/wicd
+        ;;
+        stop)
+                echo -n "Shutting down wicd services: "
+                killall wicd 2> /dev/null
+                rm -f /var/lock/subsys/wicd
+        ;;
+        status)
+                if pidofproc wicd > /dev/null ; then
+                        echo "wicd is running."
+                else
+                        status wicd
+                fi
+        ;;
+        restart | reload)
+                $0 stop
+                $0 start
+        ;;
+        *)
+                echo "Usage: wicd {start|stop|status|reload|restart}"
+                exit 1
+        ;;
+esac
+

in/init=slackware=rc.wicd.in

@@ -0,0 +1,51 @@
+#!/bin/sh
+
+# /etc/rc.d/rc.wicd
+# Start/stop/restart the Wicd daemon
+
+# This is defined in /usr/lib/python2.5/site-packages/wicd/wpath.py
+PIDFILE="%PIDFILE%"
+
+# Define start and stop functions
+
+wicd_start() {
+  if [ -e $PIDFILE ]; then
+    echo "Wicd appears to already be running."
+    echo "If this is not the case, then remove "
+    echo "$PIDFILE and try again..."
+    exit 1
+  else
+    echo "Starting wicd daemon..."
+    wicd 2>/dev/null 1>&2
+  fi
+}
+
+wicd_stop() {
+  echo "Stopping wicd daemon..."
+  if [ -e $PIDFILE ]; then
+    kill $(cat $PIDFILE) 2>/dev/null
+    rm -f $PIDFILE 2>/dev/null
+  else
+    pkill -f python.*wicd-daemon.py 2>/dev/null
+  fi
+}
+
+# See how we were called and take appropriate action	
+
+case $1 in
+  start)
+    wicd_start
+   ;;
+  stop)
+    wicd_stop
+   ;;
+  restart)
+    wicd_stop
+    wicd_start
+   ;;
+  *)
+    echo "Usage: $0 {start|stop|restart}"
+    exit 1
+   ;;
+esac
+

in/init=suse=wicd.in

@@ -0,0 +1,50 @@
+#! /bin/sh
+
+### BEGIN INIT INFO
+# Provides:       wicd-daemon
+# Required-Start: dbus
+# Default-Start:  3 4 5
+# Default-Stop:
+# Description: wicd, a wired and wireless connection manager.
+### END INIT INFO
+
+WICD_BIN=%SBIN%wicd
+test -x $WICD_BIN || exit 5
+
+. /etc/rc.status
+rc_reset
+
+case "$1" in
+        start)
+                checkproc $WICD_BIN
+                if [ $? = 0 ]; then
+                        echo -n "wicd already running"
+                        rc_status -v
+                        rc_exit
+                fi
+                echo -n "Starting wicd"
+                startproc $WICD_BIN
+                rc_status -v
+                ;;
+        stop)
+                echo -n "Shutting down wicd"
+                killproc -TERM $WICD_BIN
+                rc_status -v
+                ;;
+        restart)
+                $0 stop
+                $0 start
+                rc_status
+                ;;
+        status)
+                echo -n "Checking for wicd: "
+                checkproc $WICD_BIN
+                rc_status -v
+                ;;
+        *)
+                echo "Usage: $0 {start|stop|status|restart}"
+                exit 1
+                ;;
+esac
+
+

in/man=wicd-manager-settings.conf.5.in

@@ -0,0 +1,91 @@
+.\" Written by Robby Workman <rworkman@slackware.com>
+.TH WICD-MANAGER-SETTINGS.CONF 5 "June 2008" "wicd-1.5.0"
+.SH NAME
+wicd-manager-settings.conf \- contains settings that control Wicd's behavior
+
+.SH DESCRIPTION
+
+This file contains general configuration information for Wicd.
+.br
+This file is located at %ETC%manager-settings.conf
+
+.SH SETTINGS
+
+.TP
+.BI "link_detect_tool = " <0|1|2>
+0 = autodetect
+.br
+1 = ethtool
+.br
+2 = mii-tool
+.TP
+.BI "flush_tool = " <0|1|2>
+0 = autodetect
+.br
+1 = ip
+.br
+2 = route
+.TP
+.BI "signal_display_type = " <0|1>
+0 = Show signal strength as a percentage
+.br
+1 = Show signal strength in dBm
+.TP
+.BI "dhcp_client = " <0|1|2|3>
+0 = autodetect
+.br
+1 = dhclient
+.br
+2 = dhcpcd
+3 = pump
+.TP
+.BI "wired_interface = " <interface_name>
+.TP
+.BI "always_show_wired_interface = " <True|False>
+.TP
+.BI "wired_connect_mode = " <0|1>
+0 = connect to wired interface automatically
+.br
+1 = do not connect to wired interface automatically
+.TP
+.BI "wireless_interface = " <name_of_wireless_interface>
+.TP
+.BI "wpa_driver = " <wext|madwifi|ndiswrapper|hostap|hermes|atmel|broadcom|ipw|ralink legacy>
+The default (and best supported) is wext.  It should work properly in most cases.
+.TP
+.BI "auto_reconnect = " <True|False>
+This settings determines whether Wicd will attempt to reconnect on connection loss.
+.TP
+.BI "use_global_dns = " <True|False>
+If set to "True" and values are specified in the global DNS settings below,
+this will cause Wicd to use these DNS settings.
+.TP
+.BI "global_dns_1 = " <ip_address>
+.TP
+.BI "global_dns_2 = " <ip_address>
+.TP
+.BI "global_dns_3 = " <ip_address>
+.TP
+.BI "debug_mode = " <integer_value>
+0 = disabled
+.br
+1 = enabled
+.TP
+.BI "window_height = " <integer_value> " (in pixels)"
+This determines the height of the client window.
+.TP
+.BI "window_width = " <integer_value> " (in pixels)"
+This determines the width of the client window.
+.TP
+.BI "pref_height = " <integer_value> " (in pixels)"
+This determines the height of the "Preferences" window when launched from the client.
+.TP
+.BI "pref_width = " <integer_value> " (in pixels)"
+This determines the width of the "Preferences" window when launched from the client.
+
+
+.SH "SEE ALSO"
+.BR wicd (8),
+.BR wicd-wired-settings.conf (5),
+.BR wicd-wireless-settings.conf (5).
+

in/man=wicd-wired-settings.conf.5.in

@@ -0,0 +1,75 @@
+.\" Written by Robby Workman <rworkman@slackware.com>
+.TH WICD-WIRED-SETTINGS.CONF 5 "June 2008" "wicd-1.5.0"
+.SH NAME
+wicd-wired-settings.conf \- controls Wicd's wired network settings
+
+.SH DESCRIPTION
+
+This file contains configuration information for wired interfaces in Wicd.
+.br
+This file is located at %ETC%wired-settings.conf
+
+
+.SH SETTINGS
+
+.TP
+.BI "default = " <0|1>
+This option decides whether to use this profile as the default.
+0 = do not use this profile as default.
+.br
+1 = use this profile as default.
+.TP
+.BI "beforescript = " <None|arbitrary_script>
+This defines a script to run before Wicd brings up the connection.
+The script should be a Bourne-compatible script and should be executable.
+.br
+IMPORTANT - scripts should ONLY be writable by root and located in a
+directory that is only writable by root.
+.TP
+.BI "afterscript = " <None|arbitrary_script>
+This defines a script to run after Wicd brings up the connection.
+The script should be a Bourne-compatible script and should be executable.
+.br
+IMPORTANT - scripts should ONLY be writable by root and located in a
+directory that is only writable by root.
+.TP
+.BI "disconnectscript = " <None|arbitrary_script>
+This defines a script to run when Wicd disconnects the interface.
+The script should be a Bourne-compatible script and should be executable.
+.br
+IMPORTANT - scripts should ONLY be writable by root and located in a
+directory that is only writable by root.
+.TP
+.BI "ip = " <None|ip_address>
+Use this option if you have a static ip address for your system.
+.TP
+.BI "netmask = " <None|network mask>
+This setting is only appropriate if a static ip address is configured above.
+.TP
+.BI "broadcast = " <None|broadcast_address>
+This setting is only appropriate if a static ip address is configured above.
+.TP
+.BI "gateway = " <None|gateway_address>
+This setting is only appropriate if a static ip address is configured above.
+.TP
+.BI "use_static_dns = " <True|False>
+True = use static DNS servers instead of accepting what the dhcp server supplies.
+.TP
+.BI "use_global_dns = " <True|False>
+True = use the global DNS servers provided in wicd-manager-settings.conf(5).
+This option is only appropriate if "use_static_dns = True"
+.TP
+.BI "dns1 = " <None|ip_address>
+Static DNS address if "use_static_dns = True" and "use_global_dns = False"
+.TP
+.BI "dns2 = " <None|ip_address>
+Static DNS address if "use_static_dns = True" and "use_global_dns = False"
+.TP
+.BI "dns3 = " <None|ip_address>
+Static DNS address if "use_static_dns = True" and "use_global_dns = False"
+
+.SH "SEE ALSO"
+.BR wicd (8),
+.BR wicd-manager-settings.conf (5),
+.BR wicd-wireless-settings.conf (5).
+

in/man=wicd-wireless-settings.conf.5.in

@@ -0,0 +1,127 @@
+.\" Written by Robby Workman <rworkman@slackware.com>
+.TH WICD-WIRELESS-SETTINGS.CONF 5 "June 2008" "wicd-1.5.0"
+.SH NAME
+wicd-wired-settings.conf \- controls Wicd's wireless network settings
+
+.SH DESCRIPTION
+
+This file contains configuration information for wireless interfaces in Wicd.
+.br
+This file is located at %ETC%wireless-settings.conf
+
+
+.SH SETTINGS
+
+.TP
+.BI "bssid = " <BSSID_of_network>
+This value can be found using iwconfig(8).
+.TP
+.BI "essid = " <ESSID_of_network>
+This value can be found using iwconfig(8).
+.TP
+.BI "hidden = " <True|False>
+This option notes whether the network's ESSID is broadcast or not.
+.TP
+.BI "channel = " <integer_value>
+Valid channels are dependent upon country.
+.br
+This value can be found using iwconfig(8).
+.TP
+.BI "mode = " <Master|Ad-hoc>
+.br
+This value can be found using iwconfig(8).
+.TP
+.BI "enctype = " <encryption_template>
+This can take the value of any encryption template shown in %ENCRYPTION%.
+.TP
+.BI "encryption_method = "WEP|WPA|WPA2>
+This value can be found using iwconfig(8).
+.TP
+.BI "key = " <plain_text_key>
+Be sure this file is readable only by root.
+.TP
+.BI "automatic = " <True|False>
+This option determines whether Wicd should automatically connect to this 
+network.
+.TP
+.BI "ip = " <None|ip_address>
+Use this option if you have a static ip address for your system.
+.TP
+.BI "netmask = " <None|network mask>
+This setting is only appropriate if a static ip address is configured above.
+.TP
+.BI "broadcast = " <None|broadcast_address>
+This setting is only appropriate if a static ip address is configured above.
+.TP
+.BI "gateway = " <None|gateway_address>
+This setting is only appropriate if a static ip address is configured above.
+.TP
+.BI "use_static_dns = " <True|False>
+True = use static DNS servers instead of accepting what the dhcp server supplies.
+.TP
+.BI "use_global_dns = " <True|False>
+True = use the global DNS servers provided in wicd-manager-settings.conf(5).
+.br
+This option is only appropriate if "use_static_dns = True"
+.TP
+.BI "dns1 = " <None|ip_address>
+Static DNS address if "use_static_dns = True" and "use_global_dns = False"
+.TP
+.BI "dns2 = " <None|ip_address>
+Static DNS address if "use_static_dns = True" and "use_global_dns = False"
+.TP
+.BI "dns3 = " <None|ip_address>
+Static DNS address if "use_static_dns = True" and "use_global_dns = False"
+.TP
+.BI "use_settings_globally = " <0|1>
+Wicd keeps track of whether to autoconnect to networks based on bssid.
+This ensures that you don't accidentally connect to another network that is
+not yours but happens to have the same essid - for example, there are a lot
+of commercial routers in use with "linksys" as the essid.
+.br
+0 = Do not use settings globally
+.br
+1 = Use settings globally
+.TP
+.BI "has_profile = " <True|False>
+This parameter is used internally by Wicd and has no effect as far as the 
+user is concerned.
+.TP
+.BI "beforescript = " <None|arbitrary_script>
+This defines a script to run before Wicd brings up the connection.
+.br
+IMPORTANT - scripts should ONLY be writable by root and should be located 
+in a directory that is writable by only root.
+.TP
+.BI "afterscript = " <None|arbitrary_script>
+This defines a script to run after Wicd brings up the connection.
+.br
+IMPORTANT - scripts should ONLY be writable by root and located 
+in a directory that is writable by only root.
+.TP
+.BI "disconnectscript = " <None|arbitrary_script>
+This defines a script to run when Wicd disconnects the interface.
+.br
+IMPORTANT - scripts should ONLY be writable by root and located 
+in a directory that is writable by only root.
+
+
+
+.SH OTHER
+The "use_settings_globally" option determines how an individual network's
+configuration stanza starts.  If the option is "0" (do not use settings
+globally), then the stanza's top line will be the bssid of the access
+point (in this format):  
+.br
+[00:15:3E:87:D3:68]
+.br
+If the "option is set to "1" (use settings globally), then the first line
+of the stanza will be in this format: 
+.br
+[essid:UA Public Wireless Network]
+
+.SH "SEE ALSO"
+.BR wicd (8),
+.BR wicd-manager-settings.conf (5),
+.BR wicd-wired-settings.conf (5).
+

in/man=wicd.8.in

@@ -0,0 +1,161 @@
+.\" Written by Robby Workman <rworkman@slackware.com>
+.TH WICD 8 "June 2008" "wicd-1.5.0"
+.SH NAME
+.B Wicd
+\- Wired and Wireless Network Connection Manager
+
+.SH THEORY OF OPERATION
+
+Wicd is designed to give the user as much control over behavior of network
+connections as possible.  Every network, both wired and wireless, has its
+own profile with its own configuration options and connection behavior.
+Wicd will try to automatically connect only to networks the user specifies
+it should try, with a preference first to a wired network, then to wireless.
+
+For wired connections, users have many options for determining what network
+settings to use.  Wicd allows creation of an unlimited number of wired
+profiles, each of which has its own unique settings.  The user can choose to
+automatically connect to a selected default profile, choose a profile from a
+pop-up window every time wicd connects, or have wicd automatically choose the
+last profile used to manually connect.
+
+For wireless connections, users can select any number of wireless networks
+to automatically connect; wicd will choose the one with the highest signal
+strength to try to connect.
+
+If the user chooses, wicd will try to automatically reconnect when it detects
+that a connection is lost.  If the last known connection state is wired, wicd
+will first try to reconnect to the wired network, and if it is not available,
+wicd will try any available wireless networks which have automatic connection
+enabled.  If the last known connection state is wireless, wicd will first try
+to reconnect to the previously connected network (even if that network does
+not have automatic connection enabled), and should that fail, it will try both
+a wired connection and any available wireless networks which have automatic
+connection enabled.
+
+Wicd uses built-in linux wireless-tools, such as ifconfig and iwconfig, to
+get and configure network info.  There is some flexibility in its use of DHCP,
+providing support for dhclient, dhcpcd, and pump.  Wicd uses wpa_supplicant
+to handle all wireless encryption settings, and uses a template-based system
+to create the configuration files used by wpa_supplicant.  These templates
+can be edited, and new templates can be created by the user and imported into
+wicd, allowing connection to networks with uncommon encryption settings.
+
+.SH STRUCTURE
+
+Wicd has two major parts: the daemon, which runs with root privileges; and the
+user interface, which runs with normal user privileges.  The two parts run as
+separate processes and make use of D-Bus to communicate.
+
+The daemon is responsible for making and configuring connections, reading and
+writing configuration files and logs, and monitoring the connection status.
+The daemon's job is split between two processes: wicd-daemon.py and monitor.py.
+All the connection status monitoring, as well as the auto-reconnection logic,
+takes place in monitor.py.  Everthing else is done by wicd-daemon.py.
+
+The user interface (stored in wicd-client), which is made up of a tray 
+icon, a main GUI window, and its child dialogs, gets configuration and network
+info from the daemon either by querying it using the methods in the daemon's 
+dbus interface or by receiving signals emitted from the daemon over D-Bus.  
+Any configuration changes made in the user interface are passed back to the
+daemon, which actually applies the changes and writes them to configuration
+files.
+
+Since the user interface just queries for connection and configuration info
+from the daemon, it is possible to run wicd without the GUI at all.  Also,
+the daemon is started by wicd's init script during system startup (before any
+user logs in), making it possible to use wicd with "headless" machines.
+
+.SH USAGE HINTS
+
+.B Choosing Alternate Tools
+.br
+Wicd supports several alternatives regarding the networking tools on linux.
+In the "External Programs" tab of the Preferences menu, you can choose your
+preferred DHCP client, link detection tool, and routing tool if the defaults
+aren't suitable for your particular distribution or system.
+
+.B Custom Scripts
+.br
+If you need to run any custom commands before or after connecting to or 
+disconnecting from a network, Wicd supports this; however, you will need to
+have a graphical sudo helper installed (currently supported are kdesu, gksu,
+and ktsuss).
+.br
+If you do not have a graphical sudo helper installed, you still have the
+ability to use custom scripts, but you will have to set them up manually.
+See wicd-wired-settings.conf(5) and/or wicd-wireless-settings.conf(5) for
+more information on how to do so.
+
+.B Automatically Connecting to Networks
+.br
+Wicd uses the BSSID to recognize a particular network (and thus to decide
+whether it should automatically connect to it).  If you are on a network 
+that has many different access points which all have the same ESSID 
+(many universities have such networks), there is an option in the "Advanced
+Settings" to "Use these settings for all networks sharing this essid."
+With this option enabled, Wicd will autoconnect to that network, regardless
+of which node it sees.
+
+
+.SH FILES
+
+.B %ETC%manager-settings.conf
+.br
+This file contains global settings for Wicd.
+.br
+See this file's own man page for more information about it.
+
+.B %ETC%wired-settings.conf
+.br
+This file contains settings related to the wired interface.
+.br
+See this file's own man page for more information about it.
+
+.B %ETC%wireless-settings.conf
+.br
+This file contains settings related to the wireless interface.
+.br
+See this file's own man page for more information about it.
+
+.B %ENCRYPTION%
+.br
+This directory contains various templates for encrypted (WEP, WPA, etcetera)
+connections.  If none of them fit your needs, you may create your own and
+add it to this directory.  If you do this, please contact the authors
+(see below) of Wicd.
+
+.B %NETWORKS%
+.br
+This directory contains individual configuration files for each encrypted
+network you set up in Wicd.
+
+.B %LOG%
+.br
+This directory contains logfiles of Wicd's activity.  Please refer to the
+log if you are having connection or other problems.
+
+.SH "SEE ALSO"
+.BR wicd-manager-settings.conf (5),
+.BR wicd-wired-settings.conf (5),
+.BR wicd-wireless-settings.conf (5),
+.BR ifconfig (8),
+.BR iwconfig (8),
+.BR wpa_supplicant (8),
+.BR route (8),
+.BR ip (8),
+.BR mii-tool (8),
+.BR ethtool (8),
+.BR dhclient (8),
+.BR dhcpcd (8),
+.BR pump (8).
+
+
+.SH WICD AUTHORS
+Adam Blackburn <compwiz18@gmail.com>
+.br
+Dan O'Reilly <oreilldf@gmail.com>
+
+.SH MANPAGE AUTHOR
+Robby Workman <rworkman@slackware.com>
+

in/other=50-wicd-suspend.sh.in

@@ -0,0 +1,3 @@
+#!/bin/sh
+# Put wifi interface down
+%LIB%suspend.py

in/other=80-wicd-connect.sh.in

@@ -0,0 +1,4 @@
+#!/bin/sh
+# Bring wifi network interface back up.
+
+%LIB%autoconnect.py

in/other=postinst.in

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+# Stop daemon
+if [ -f %INIT%%INITFILENAME% ]; then
+  %INIT%%INITFILENAME% stop
+fi
+  
+# Remove Wicd from the boot sequence
+if which update-rc.d &>/dev/null ; then
+  update-rc.d -f wicd remove
+fi
+
+# Remove pyc files 
+# They may exist if you are upgrading Wicd
+rm -f /opt/wicd/*.pyc
+
+# Add Wicd to the startup sequence
+# 80 to make sure that dbus is running when Wicd starts
+if which update-rc.d &>/dev/null ; then
+  update-rc.d wicd start 80 2 3 4 5 . stop 20 0 1 6 .
+fi
+
+# Start the daemon
+if [ -f %INIT%%INITFILENAME% ]; then
+  %INIT%%INITFILENAME% start
+fi

in/scripts=wicd-client.in

@@ -0,0 +1,2 @@
+#!/bin/bash
+%LIB%wicd-client.py $@

in/scripts=wicd.in

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+%LIB%wicd-daemon.py $@

in/wicd=wpath.py.in

@@ -0,0 +1,71 @@
+""" Path configuration and functions for the wicd daemon and gui clients.
+
+chdir() -- Change directory to the location of the current file.
+
+"""
+
+import os
+
+# The path containing the wpath.py file.
+current = os.path.dirname(os.path.realpath(__file__)) + '/'
+
+# These paths can easily be modified to handle system wide installs, or
+# they can be left as is if all files remain with the source directory
+# layout.
+
+# These paths are replaced when setup.py configure is run
+
+# All directory paths *MUST* end in a /
+
+# DIRECTORIES
+
+lib = '%LIB%'
+share = '%SHARE%'
+etc = '%ETC%'
+images = '%IMAGES%'
+encryption = '%ENCRYPTION%'
+bin = '%BIN%'
+networks = '%NETWORKS%'
+log = '%LOG%'
+resume = '%RESUME%'
+suspend = '%SUSPEND%'
+sbin = '%SBIN%'
+dbus = '%DBUS%'
+desktop = '%DESKTOP%'
+translations = '%TRANSLATIONS%'
+icons = '%ICONS%'
+autostart = '%AUTOSTART%'
+init = '%INIT%'
+docdir = '%DOCDIR%'
+mandir = '%MANDIR%'
+kdedir = '%KDEDIR%'
+
+# FILES
+
+# python begins the file section
+python = '%PYTHON%'
+pidfile = '%PIDFILE%'
+# stores something like other/wicd
+# really only used in the install
+initfile = '%INITFILE%'
+# stores only the file name, i.e. wicd
+initfilename = '%INITFILENAME%'
+
+# BOOLEANS
+
+no_install_init = %NO_INSTALL_INIT%
+no_install_man = %NO_INSTALL_MAN%
+no_install_kde = %NO_INSTALL_KDE%
+no_install_acpi = %NO_INSTALL_ACPI%
+no_install_install = %NO_INSTALL_INSTALL%
+no_install_license = %NO_INSTALL_LICENSE%
+
+def chdir(file):
+    """Change directory to the location of the specified file.
+
+    Keyword arguments:
+    file -- the file to switch to (usually __file__)
+
+    """
+    os.chdir(os.path.dirname(os.path.realpath(file)))
+

in/wpath.py.in

@@ -0,0 +1 @@
+link wicd=wpath.py.in

init/arch/wicd

@@ -0,0 +1,33 @@
+#!/bin/bash
+
+# borrowed from
+# http://repos.archlinux.org/viewvc.cgi/wicd/repos/extra-i686/wicd-daemon?revision=1&view=markup
+# and modified for 1.5.0
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+case "$1" in
+  start)
+    stat_busy "Starting wicd Daemon"
+    killall wicd &> /dev/null
+    /usr/sbin/wicd-daemon &> /dev/null
+    add_daemon wicd
+    stat_done
+    ;;
+  stop)
+    stat_busy "Stopping wicd Daemon"
+    killall wicd &> /dev/null
+    rm_daemon wicd
+    stat_done
+    ;;
+  restart)
+    $0 stop
+    sleep 1
+    $0 start
+    ;;
+  *)
+    echo "usage: $0 {start|stop|restart}"  
+esac
+exit 0
+

init/debian/wicd

@@ -0,0 +1,159 @@
+#! /bin/sh
+### BEGIN INIT INFO
+# Provides:          wicd
+# Required-Start:    dbus
+# Required-Stop:     
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Starts and stops Wicd
+# Description:       Starts and stops Wicd, a network manager
+### END INIT INFO
+
+# Author: Adam Blackburn <compwiz18@users.sourceforge.net>
+#
+
+# Do NOT "set -e"
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/usr/sbin:/usr/bin:/sbin:/bin
+DESC="Network connection manager"
+NAME=wicd
+DAEMON=/usr/sbin/$NAME
+DAEMON_ARGS=""
+PIDFILE=/var/run/wicd/wicd.pid
+SCRIPTNAME=/etc/init.d/wicd
+
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+[ -f /etc/default/rcS ] && . /etc/default/rcS
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+# Perhaps not the best idea
+# but a confirmation is nice
+# when starting/stopping the daemon
+VERBOSE=yes
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	#   vvvv -- don't do this -- vvvv
+	#   [ -e $PIDFILE ] && return 1
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON -- \
+		$DAEMON_ARGS > /dev/null 2> /dev/null\
+		|| return 2
+	# Add code here, if necessary, that waits for the process to be ready
+	# to handle requests from services started subsequently which depend
+	# on this one.  As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	# Many daemons don't delete their pidfiles when they exit.
+	rm -f $PIDFILE
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+  start)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+	do_start
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  #reload|force-reload)
+	#
+	# If do_reload() is not implemented then leave this commented out
+	# and leave 'force-reload' as an alias for 'restart'.
+	#
+	#log_daemon_msg "Reloading $DESC" "$NAME"
+	#do_reload
+	#log_end_msg $?
+	#;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+	  	# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+  *)
+	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+	echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
+	exit 3
+	;;
+esac
+
+:

init/default/wicd

@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# /etc/init.d/wicd
+# Start/stop/restart the Wicd daemon
+# Modified the Slackware default init script for use
+# where the distro is not detected.
+
+# This is defined in /usr/lib/python2.5/site-packages/wicd/wpath.py
+PIDFILE="/var/run/wicd/wicd.pid"
+
+# Define start and stop functions
+
+wicd_start() {
+  if [ -e $PIDFILE ]; then
+    echo "Wicd appears to already be running."
+    echo "If this is not the case, then remove "
+    echo "$PIDFILE and try again..."
+    exit 1
+  else
+    echo "Starting wicd daemon..."
+    /usr/sbin/wicd 2>/dev/null 1>&2
+  fi
+}
+
+wicd_stop() {
+  echo "Stopping wicd daemon..."
+  if [ -e $PIDFILE ]; then
+    kill $(cat $PIDFILE) 2>/dev/null
+    rm -f $PIDFILE 2>/dev/null
+  else
+    killall wicd-client 2>/dev/null
+  fi
+}
+
+# See how we were called and take appropriate action	
+
+case $1 in
+  start)
+    wicd_start
+   ;;
+  stop)
+    wicd_stop
+   ;;
+  restart)
+    wicd_stop
+    wicd_start
+   ;;
+  *)
+    echo "Usage: $0 {start|stop|restart}"
+    exit 1
+   ;;
+esac
+

init/gentoo/wicd

@@ -0,0 +1,24 @@
+#!/sbin/runscript
+# Copyright 1999-2006 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+opts="start stop restart"
+
+WICD_DAEMON=/usr/sbin/wicd
+WICD_PIDFILE=/var/run/wicd/wicd.pid
+
+depend() {
+	need dbus
+}
+
+start() {
+	ebegin "Starting wicd daemon"
+	$WICD_DAEMON &>/dev/null
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping wicd daemon"
+	start-stop-daemon --stop --pidfile "$WICD_PIDFILE"
+	eend $?
+}

init/pld/wicd

@@ -0,0 +1,88 @@
+#!/bin/sh
+#
+# wicd	wicd wireless connection daemon
+#
+# chkconfig:	345 99 01
+#
+# description:	wicd wireless connection daemon
+#
+# processname:	wicd
+# config:
+# pidfile: /var/run/wicd.pid
+#
+# $Id: template.init 9689 2008-03-27 16:15:39Z patrys $
+
+# Source function library
+. /etc/rc.d/init.d/functions
+
+
+# Get service config - may override defaults
+# [ -f /etc/sysconfig/wicd ] && . /etc/sysconfig/wicd
+
+WICD_BIN=/usr/sbin/wicd
+
+start() {
+	# Check if the service is already running?
+	if [ ! -f /var/lock/subsys/wicd ]; then
+		msg_starting wicd
+		daemon $WICD_BIN
+		RETVAL=$?
+		[ $RETVAL -eq 0 ] && touch /var/lock/subsys/wicd
+	else
+		msg_already_running wicd
+	fi
+}
+
+stop() {
+	if [ -f /var/lock/subsys/wicd ]; then
+		# Stop daemons.
+		msg_stopping wicd
+		# killproc wicd
+		killproc --pidfile /var/run/wicd.pid wicd -TERM
+		rm -f /var/lock/subsys/wicd
+	else
+		msg_not_running wicd
+	fi
+}
+
+
+condrestart() {
+	if [ -f /var/lock/subsys/wicd ]; then
+		stop
+		start
+	else
+		msg_not_running wicd
+		RETVAL=$1
+	fi
+}
+
+RETVAL=0
+# See how we were called.
+case "$1" in
+  start)
+  	start
+	;;
+  stop)
+  	stop
+	;;
+  restart)
+	stop
+	start
+	;;
+  try-restart)
+	condrestart 0
+	;;
+# use this one if program doesn't support reloading without restart
+  force-reload)
+	condrestart 7
+	;;
+  status)
+	status wicd
+	RETVAL=$?
+	;;
+  *)
+	msg_usage "$0 {start|stop|restart|try-restart|reload|force-reload|status}"
+	exit 3
+esac
+
+exit $RETVAL

init/redhat/wicd

@@ -0,0 +1,43 @@
+#! /bin/sh
+#
+# /etc/init.d/wicd
+#
+# chkconfig: - 98 02
+# description: Wicd is a wireless and wired network manager for Linux.
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# This script was borrowed from the Wicd wiki page on building for Fedora
+# http://wicd.net/wiki/doku.php?id=fedora
+
+WICD_BIN=/usr/sbin/wicd
+
+case "$1" in
+        start)
+                echo -n "Starting wicd services: "
+                daemon $WICD_BIN 2> /dev/null
+                touch /var/lock/subsys/wicd
+        ;;
+        stop)
+                echo -n "Shutting down wicd services: "
+                killall wicd 2> /dev/null
+                rm -f /var/lock/subsys/wicd
+        ;;
+        status)
+                if pidofproc wicd > /dev/null ; then
+                        echo "wicd is running."
+                else
+                        status wicd
+                fi
+        ;;
+        restart | reload)
+                $0 stop
+                $0 start
+        ;;
+        *)
+                echo "Usage: wicd {start|stop|status|reload|restart}"
+                exit 1
+        ;;
+esac
+

init/slackware/rc.wicd

@@ -0,0 +1,51 @@
+#!/bin/sh
+
+# /etc/rc.d/rc.wicd
+# Start/stop/restart the Wicd daemon
+
+# This is defined in /usr/lib/python2.5/site-packages/wicd/wpath.py
+PIDFILE="/var/run/wicd/wicd.pid"
+
+# Define start and stop functions
+
+wicd_start() {
+  if [ -e $PIDFILE ]; then
+    echo "Wicd appears to already be running."
+    echo "If this is not the case, then remove "
+    echo "$PIDFILE and try again..."
+    exit 1
+  else
+    echo "Starting wicd daemon..."
+    wicd 2>/dev/null 1>&2
+  fi
+}
+
+wicd_stop() {
+  echo "Stopping wicd daemon..."
+  if [ -e $PIDFILE ]; then
+    kill $(cat $PIDFILE) 2>/dev/null
+    rm -f $PIDFILE 2>/dev/null
+  else
+    pkill -f python.*wicd-daemon.py 2>/dev/null
+  fi
+}
+
+# See how we were called and take appropriate action	
+
+case $1 in
+  start)
+    wicd_start
+   ;;
+  stop)
+    wicd_stop
+   ;;
+  restart)
+    wicd_stop
+    wicd_start
+   ;;
+  *)
+    echo "Usage: $0 {start|stop|restart}"
+    exit 1
+   ;;
+esac
+

init/suse/wicd

@@ -0,0 +1,50 @@
+#! /bin/sh
+
+### BEGIN INIT INFO
+# Provides:       wicd-daemon
+# Required-Start: dbus
+# Default-Start:  3 4 5
+# Default-Stop:
+# Description: wicd, a wired and wireless connection manager.
+### END INIT INFO
+
+WICD_BIN=/usr/sbin/wicd
+test -x $WICD_BIN || exit 5
+
+. /etc/rc.status
+rc_reset
+
+case "$1" in
+        start)
+                checkproc $WICD_BIN
+                if [ $? = 0 ]; then
+                        echo -n "wicd already running"
+                        rc_status -v
+                        rc_exit
+                fi
+                echo -n "Starting wicd"
+                startproc $WICD_BIN
+                rc_status -v
+                ;;
+        stop)
+                echo -n "Shutting down wicd"
+                killproc -TERM $WICD_BIN
+                rc_status -v
+                ;;
+        restart)
+                $0 stop
+                $0 start
+                rc_status
+                ;;
+        status)
+                echo -n "Checking for wicd: "
+                checkproc $WICD_BIN
+                rc_status -v
+                ;;
+        *)
+                echo "Usage: $0 {start|stop|status|restart}"
+                exit 1
+                ;;
+esac
+
+

launchdaemon.sh

@@ -1,4 +0,0 @@
-#!/bin/bash
-echo "Starting wicd daemon..."
-/opt/wicd/daemon.py 2> /dev/null
-

man/wicd-manager-settings.conf.5

@@ -0,0 +1,91 @@
+.\" Written by Robby Workman <rworkman@slackware.com>
+.TH WICD-MANAGER-SETTINGS.CONF 5 "June 2008" "wicd-1.5.0"
+.SH NAME
+wicd-manager-settings.conf \- contains settings that control Wicd's behavior
+
+.SH DESCRIPTION
+
+This file contains general configuration information for Wicd.
+.br
+This file is located at /etc/wicd/manager-settings.conf
+
+.SH SETTINGS
+
+.TP
+.BI "link_detect_tool = " <0|1|2>
+0 = autodetect
+.br
+1 = ethtool
+.br
+2 = mii-tool
+.TP
+.BI "flush_tool = " <0|1|2>
+0 = autodetect
+.br
+1 = ip
+.br
+2 = route
+.TP
+.BI "signal_display_type = " <0|1>
+0 = Show signal strength as a percentage
+.br
+1 = Show signal strength in dBm
+.TP
+.BI "dhcp_client = " <0|1|2|3>
+0 = autodetect
+.br
+1 = dhclient
+.br
+2 = dhcpcd
+3 = pump
+.TP
+.BI "wired_interface = " <interface_name>
+.TP
+.BI "always_show_wired_interface = " <True|False>
+.TP
+.BI "wired_connect_mode = " <0|1>
+0 = connect to wired interface automatically
+.br
+1 = do not connect to wired interface automatically
+.TP
+.BI "wireless_interface = " <name_of_wireless_interface>
+.TP
+.BI "wpa_driver = " <wext|madwifi|ndiswrapper|hostap|hermes|atmel|broadcom|ipw|ralink legacy>
+The default (and best supported) is wext.  It should work properly in most cases.
+.TP
+.BI "auto_reconnect = " <True|False>
+This settings determines whether Wicd will attempt to reconnect on connection loss.
+.TP
+.BI "use_global_dns = " <True|False>
+If set to "True" and values are specified in the global DNS settings below,
+this will cause Wicd to use these DNS settings.
+.TP
+.BI "global_dns_1 = " <ip_address>
+.TP
+.BI "global_dns_2 = " <ip_address>
+.TP
+.BI "global_dns_3 = " <ip_address>
+.TP
+.BI "debug_mode = " <integer_value>
+0 = disabled
+.br
+1 = enabled
+.TP
+.BI "window_height = " <integer_value> " (in pixels)"
+This determines the height of the client window.
+.TP
+.BI "window_width = " <integer_value> " (in pixels)"
+This determines the width of the client window.
+.TP
+.BI "pref_height = " <integer_value> " (in pixels)"
+This determines the height of the "Preferences" window when launched from the client.
+.TP
+.BI "pref_width = " <integer_value> " (in pixels)"
+This determines the width of the "Preferences" window when launched from the client.
+
+
+.SH "SEE ALSO"
+.BR wicd (8),
+.BR wicd-wired-settings.conf (5),
+.BR wicd-wireless-settings.conf (5).
+

man/wicd-wired-settings.conf.5

@@ -0,0 +1,75 @@
+.\" Written by Robby Workman <rworkman@slackware.com>
+.TH WICD-WIRED-SETTINGS.CONF 5 "June 2008" "wicd-1.5.0"
+.SH NAME
+wicd-wired-settings.conf \- controls Wicd's wired network settings
+
+.SH DESCRIPTION
+
+This file contains configuration information for wired interfaces in Wicd.
+.br
+This file is located at /etc/wicd/wired-settings.conf
+
+
+.SH SETTINGS
+
+.TP
+.BI "default = " <0|1>
+This option decides whether to use this profile as the default.
+0 = do not use this profile as default.
+.br
+1 = use this profile as default.
+.TP
+.BI "beforescript = " <None|arbitrary_script>
+This defines a script to run before Wicd brings up the connection.
+The script should be a Bourne-compatible script and should be executable.
+.br
+IMPORTANT - scripts should ONLY be writable by root and located in a
+directory that is only writable by root.
+.TP
+.BI "afterscript = " <None|arbitrary_script>
+This defines a script to run after Wicd brings up the connection.
+The script should be a Bourne-compatible script and should be executable.
+.br
+IMPORTANT - scripts should ONLY be writable by root and located in a
+directory that is only writable by root.
+.TP
+.BI "disconnectscript = " <None|arbitrary_script>
+This defines a script to run when Wicd disconnects the interface.
+The script should be a Bourne-compatible script and should be executable.
+.br
+IMPORTANT - scripts should ONLY be writable by root and located in a
+directory that is only writable by root.
+.TP
+.BI "ip = " <None|ip_address>
+Use this option if you have a static ip address for your system.
+.TP
+.BI "netmask = " <None|network mask>
+This setting is only appropriate if a static ip address is configured above.
+.TP
+.BI "broadcast = " <None|broadcast_address>
+This setting is only appropriate if a static ip address is configured above.
+.TP
+.BI "gateway = " <None|gateway_address>
+This setting is only appropriate if a static ip address is configured above.
+.TP
+.BI "use_static_dns = " <True|False>
+True = use static DNS servers instead of accepting what the dhcp server supplies.
+.TP
+.BI "use_global_dns = " <True|False>
+True = use the global DNS servers provided in wicd-manager-settings.conf(5).
+This option is only appropriate if "use_static_dns = True"
+.TP
+.BI "dns1 = " <None|ip_address>
+Static DNS address if "use_static_dns = True" and "use_global_dns = False"
+.TP
+.BI "dns2 = " <None|ip_address>
+Static DNS address if "use_static_dns = True" and "use_global_dns = False"
+.TP
+.BI "dns3 = " <None|ip_address>
+Static DNS address if "use_static_dns = True" and "use_global_dns = False"
+
+.SH "SEE ALSO"
+.BR wicd (8),
+.BR wicd-manager-settings.conf (5),
+.BR wicd-wireless-settings.conf (5).
+

man/wicd-wireless-settings.conf.5

@@ -0,0 +1,127 @@
+.\" Written by Robby Workman <rworkman@slackware.com>
+.TH WICD-WIRELESS-SETTINGS.CONF 5 "June 2008" "wicd-1.5.0"
+.SH NAME
+wicd-wired-settings.conf \- controls Wicd's wireless network settings
+
+.SH DESCRIPTION
+
+This file contains configuration information for wireless interfaces in Wicd.
+.br
+This file is located at /etc/wicd/wireless-settings.conf
+
+
+.SH SETTINGS
+
+.TP
+.BI "bssid = " <BSSID_of_network>
+This value can be found using iwconfig(8).
+.TP
+.BI "essid = " <ESSID_of_network>
+This value can be found using iwconfig(8).
+.TP
+.BI "hidden = " <True|False>
+This option notes whether the network's ESSID is broadcast or not.
+.TP
+.BI "channel = " <integer_value>
+Valid channels are dependent upon country.
+.br
+This value can be found using iwconfig(8).
+.TP
+.BI "mode = " <Master|Ad-hoc>
+.br
+This value can be found using iwconfig(8).
+.TP
+.BI "enctype = " <encryption_template>
+This can take the value of any encryption template shown in /etc/wicd/encryption/templates/.
+.TP
+.BI "encryption_method = "WEP|WPA|WPA2>
+This value can be found using iwconfig(8).
+.TP
+.BI "key = " <plain_text_key>
+Be sure this file is readable only by root.
+.TP
+.BI "automatic = " <True|False>
+This option determines whether Wicd should automatically connect to this 
+network.
+.TP
+.BI "ip = " <None|ip_address>
+Use this option if you have a static ip address for your system.
+.TP
+.BI "netmask = " <None|network mask>
+This setting is only appropriate if a static ip address is configured above.
+.TP
+.BI "broadcast = " <None|broadcast_address>
+This setting is only appropriate if a static ip address is configured above.
+.TP
+.BI "gateway = " <None|gateway_address>
+This setting is only appropriate if a static ip address is configured above.
+.TP
+.BI "use_static_dns = " <True|False>
+True = use static DNS servers instead of accepting what the dhcp server supplies.
+.TP
+.BI "use_global_dns = " <True|False>
+True = use the global DNS servers provided in wicd-manager-settings.conf(5).
+.br
+This option is only appropriate if "use_static_dns = True"
+.TP
+.BI "dns1 = " <None|ip_address>
+Static DNS address if "use_static_dns = True" and "use_global_dns = False"
+.TP
+.BI "dns2 = " <None|ip_address>
+Static DNS address if "use_static_dns = True" and "use_global_dns = False"
+.TP
+.BI "dns3 = " <None|ip_address>
+Static DNS address if "use_static_dns = True" and "use_global_dns = False"
+.TP
+.BI "use_settings_globally = " <0|1>
+Wicd keeps track of whether to autoconnect to networks based on bssid.
+This ensures that you don't accidentally connect to another network that is
+not yours but happens to have the same essid - for example, there are a lot
+of commercial routers in use with "linksys" as the essid.
+.br
+0 = Do not use settings globally
+.br
+1 = Use settings globally
+.TP
+.BI "has_profile = " <True|False>
+This parameter is used internally by Wicd and has no effect as far as the 
+user is concerned.
+.TP
+.BI "beforescript = " <None|arbitrary_script>
+This defines a script to run before Wicd brings up the connection.
+.br
+IMPORTANT - scripts should ONLY be writable by root and should be located 
+in a directory that is writable by only root.
+.TP
+.BI "afterscript = " <None|arbitrary_script>
+This defines a script to run after Wicd brings up the connection.
+.br
+IMPORTANT - scripts should ONLY be writable by root and located 
+in a directory that is writable by only root.
+.TP
+.BI "disconnectscript = " <None|arbitrary_script>
+This defines a script to run when Wicd disconnects the interface.
+.br
+IMPORTANT - scripts should ONLY be writable by root and located 
+in a directory that is writable by only root.
+
+
+
+.SH OTHER
+The "use_settings_globally" option determines how an individual network's
+configuration stanza starts.  If the option is "0" (do not use settings
+globally), then the stanza's top line will be the bssid of the access
+point (in this format):  
+.br
+[00:15:3E:87:D3:68]
+.br
+If the "option is set to "1" (use settings globally), then the first line
+of the stanza will be in this format: 
+.br
+[essid:UA Public Wireless Network]
+
+.SH "SEE ALSO"
+.BR wicd (8),
+.BR wicd-manager-settings.conf (5),
+.BR wicd-wired-settings.conf (5).
+

man/wicd.8

@@ -0,0 +1,161 @@
+.\" Written by Robby Workman <rworkman@slackware.com>
+.TH WICD 8 "June 2008" "wicd-1.5.0"
+.SH NAME
+.B Wicd
+\- Wired and Wireless Network Connection Manager
+
+.SH THEORY OF OPERATION
+
+Wicd is designed to give the user as much control over behavior of network
+connections as possible.  Every network, both wired and wireless, has its
+own profile with its own configuration options and connection behavior.
+Wicd will try to automatically connect only to networks the user specifies
+it should try, with a preference first to a wired network, then to wireless.
+
+For wired connections, users have many options for determining what network
+settings to use.  Wicd allows creation of an unlimited number of wired
+profiles, each of which has its own unique settings.  The user can choose to
+automatically connect to a selected default profile, choose a profile from a
+pop-up window every time wicd connects, or have wicd automatically choose the
+last profile used to manually connect.
+
+For wireless connections, users can select any number of wireless networks
+to automatically connect; wicd will choose the one with the highest signal
+strength to try to connect.
+
+If the user chooses, wicd will try to automatically reconnect when it detects
+that a connection is lost.  If the last known connection state is wired, wicd
+will first try to reconnect to the wired network, and if it is not available,
+wicd will try any available wireless networks which have automatic connection
+enabled.  If the last known connection state is wireless, wicd will first try
+to reconnect to the previously connected network (even if that network does
+not have automatic connection enabled), and should that fail, it will try both
+a wired connection and any available wireless networks which have automatic
+connection enabled.
+
+Wicd uses built-in linux wireless-tools, such as ifconfig and iwconfig, to
+get and configure network info.  There is some flexibility in its use of DHCP,
+providing support for dhclient, dhcpcd, and pump.  Wicd uses wpa_supplicant
+to handle all wireless encryption settings, and uses a template-based system
+to create the configuration files used by wpa_supplicant.  These templates
+can be edited, and new templates can be created by the user and imported into
+wicd, allowing connection to networks with uncommon encryption settings.
+
+.SH STRUCTURE
+
+Wicd has two major parts: the daemon, which runs with root privileges; and the
+user interface, which runs with normal user privileges.  The two parts run as
+separate processes and make use of D-Bus to communicate.
+
+The daemon is responsible for making and configuring connections, reading and
+writing configuration files and logs, and monitoring the connection status.
+The daemon's job is split between two processes: wicd-daemon.py and monitor.py.
+All the connection status monitoring, as well as the auto-reconnection logic,
+takes place in monitor.py.  Everthing else is done by wicd-daemon.py.
+
+The user interface (stored in wicd-client), which is made up of a tray 
+icon, a main GUI window, and its child dialogs, gets configuration and network
+info from the daemon either by querying it using the methods in the daemon's 
+dbus interface or by receiving signals emitted from the daemon over D-Bus.  
+Any configuration changes made in the user interface are passed back to the
+daemon, which actually applies the changes and writes them to configuration
+files.
+
+Since the user interface just queries for connection and configuration info
+from the daemon, it is possible to run wicd without the GUI at all.  Also,
+the daemon is started by wicd's init script during system startup (before any
+user logs in), making it possible to use wicd with "headless" machines.
+
+.SH USAGE HINTS
+
+.B Choosing Alternate Tools
+.br
+Wicd supports several alternatives regarding the networking tools on linux.
+In the "External Programs" tab of the Preferences menu, you can choose your
+preferred DHCP client, link detection tool, and routing tool if the defaults
+aren't suitable for your particular distribution or system.
+
+.B Custom Scripts
+.br
+If you need to run any custom commands before or after connecting to or 
+disconnecting from a network, Wicd supports this; however, you will need to
+have a graphical sudo helper installed (currently supported are kdesu, gksu,
+and ktsuss).
+.br
+If you do not have a graphical sudo helper installed, you still have the
+ability to use custom scripts, but you will have to set them up manually.
+See wicd-wired-settings.conf(5) and/or wicd-wireless-settings.conf(5) for
+more information on how to do so.
+
+.B Automatically Connecting to Networks
+.br
+Wicd uses the BSSID to recognize a particular network (and thus to decide
+whether it should automatically connect to it).  If you are on a network 
+that has many different access points which all have the same ESSID 
+(many universities have such networks), there is an option in the "Advanced
+Settings" to "Use these settings for all networks sharing this essid."
+With this option enabled, Wicd will autoconnect to that network, regardless
+of which node it sees.
+
+
+.SH FILES
+
+.B /etc/wicd/manager-settings.conf
+.br
+This file contains global settings for Wicd.
+.br
+See this file's own man page for more information about it.
+
+.B /etc/wicd/wired-settings.conf
+.br
+This file contains settings related to the wired interface.
+.br
+See this file's own man page for more information about it.
+
+.B /etc/wicd/wireless-settings.conf
+.br
+This file contains settings related to the wireless interface.
+.br
+See this file's own man page for more information about it.
+
+.B /etc/wicd/encryption/templates/
+.br
+This directory contains various templates for encrypted (WEP, WPA, etcetera)
+connections.  If none of them fit your needs, you may create your own and
+add it to this directory.  If you do this, please contact the authors
+(see below) of Wicd.
+
+.B /var/lib/wicd/configurations/
+.br
+This directory contains individual configuration files for each encrypted
+network you set up in Wicd.
+
+.B /var/log/wicd/
+.br
+This directory contains logfiles of Wicd's activity.  Please refer to the
+log if you are having connection or other problems.
+
+.SH "SEE ALSO"
+.BR wicd-manager-settings.conf (5),
+.BR wicd-wired-settings.conf (5),
+.BR wicd-wireless-settings.conf (5),
+.BR ifconfig (8),
+.BR iwconfig (8),
+.BR wpa_supplicant (8),
+.BR route (8),
+.BR ip (8),
+.BR mii-tool (8),
+.BR ethtool (8),
+.BR dhclient (8),
+.BR dhcpcd (8),
+.BR pump (8).
+
+
+.SH WICD AUTHORS
+Adam Blackburn <compwiz18@gmail.com>
+.br
+Dan O'Reilly <oreilldf@gmail.com>
+
+.SH MANPAGE AUTHOR
+Robby Workman <rworkman@slackware.com>
+

other/wicd-tray.desktop

@@ -0,0 +1,16 @@
+[Desktop Entry]
+Categories=Application;Network;
+Encoding=UTF-8
+Exec=wicd-client
+GenericName=Network Manager
+Icon=wicd-client
+Icon[en_US]=wicd-client
+Name=Wicd Network Manager Tray
+Name[en_US]=Wicd Network Manager Tray
+Comment=Display network connection status in the system tray
+Comment[en_US]=Display network connection status in the system tray
+Terminal=false
+Type=Application
+Version=1.0
+X-GNOME-Autostart-enabled=true
+X-KDE-autostart-after=panel

scripts/wicd

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+/usr/lib/wicd/wicd-daemon.py $@

scripts/wicd-client

@@ -0,0 +1,2 @@
+#!/bin/bash
+/usr/lib/wicd/wicd-client.py $@

setup.cfg

@@ -1,4 +1,2 @@
 [install]
-install_lib=/opt/wicd
+record = install.log
-install_scripts=/opt/wicd
-install_data=/opt/wicd

setup.py

@@ -1,6 +1,6 @@
 #
-#   Copyright (C) 2007 Adam Blackburn
+#   Copyright (C) 2007 - 2008 Adam Blackburn
-#   Copyright (C) 2007 Dan O'Reilly
+#   Copyright (C) 2007 - 2008 Dan O'Reilly
 #
 #   This program is free software; you can redistribute it and/or modify
 #   it under the terms of the GNU General Public License Version 2 as
@@ -15,58 +15,333 @@
 #   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #
 
-from distutils.core import setup
+from distutils.core import setup, Command
 import os
+import shutil
+import sys
 
-data=[
+# Be sure to keep this updated!
-('/etc/dbus-1/system.d', ['other/wicd.conf']),
+VERSION_NUM = '1.6.0'
-('/usr/share/applications', ['other/hammer-00186ddbac.desktop']),
+
-('', ['launchdaemon.sh']),
+class configure(Command):
-('/usr/share/pixmaps', ['other/wicd.png']),
+    description = "configure the paths that Wicd will be installed to"
-('images', [('images/' + b) for b in os.listdir('images') if not b.startswith('.')]),
-('encryption/templates', [('encryption/templates/' + b) for b in os.listdir('encryption/templates') if not b.startswith('.')]),
-('encryption/configurations', []),
-('data', ['data/wicd.png', 'data/wicd.glade']),
-('translations', ['translations/wicd.pot', 'translations/ids']),
-('translations/de_DE/LC_MESSAGES', ['translations/de_DE/LC_MESSAGES/wicd.mo']),
-('translations/zh_HK/LC_MESSAGES', ['translations/zh_HK/LC_MESSAGES/wicd.mo']),
-('translations/fr_FR/LC_MESSAGES', ['translations/fr_FR/LC_MESSAGES/wicd.mo']),
-('translations/ca_ES/LC_MESSAGES', ['translations/ca_ES/LC_MESSAGES/wicd.mo']),
-('translations/gl_GL/LC_MESSAGES', ['translations/gl_GL/LC_MESSAGES/wicd.mo']),
-('translations/po', [('translations/po/' + b) for b in os.listdir('translations/po') if not b.startswith('.')]),
-('translations/sl_SI/LC_MESSAGES', ['translations/sl_SI/LC_MESSAGES/wicd.mo']),
-('translations/ja_JA/LC_MESSAGES', ['translations/ja_JA/LC_MESSAGES/wicd.mo']),
-('translations/it_IT/LC_MESSAGES', ['translations/it_IT/LC_MESSAGES/wicd.mo']),
-('translations/es_ES/LC_MESSAGES', ['translations/es_ES/LC_MESSAGES/wicd.mo']),
-('translations/sv_SE/LC_MESSAGES', ['translations/sv_SE/LC_MESSAGES/wicd.mo']),
-('translations/en_US/LC_MESSAGES', ['translations/en_US/LC_MESSAGES/wicd.mo']),
-('translations/fi_FI/LC_MESSAGES', ['translations/fi_FI/LC_MESSAGES/wicd.mo']),
-('translations/pl_PL/LC_MESSAGES', ['translations/pl_PL/LC_MESSAGES/wicd.mo']),
-('translations/nl_NL/LC_MESSAGES', ['translations/nl_NL/LC_MESSAGES/wicd.mo'])]
-if os.access('/etc/redhat-release', os.F_OK):
-    data.append(('/etc/rc.d/init.d', ['other/initscripts/redhat/wicd']))
-elif os.access('/etc/SuSE-release', os.F_OK):
-    data.append(('/etc/init.d', ['other/initscripts/debian/wicd']))
-elif os.access('/etc/fedora-release', os.F_OK):
-    data.append(('/etc/rc.d/init.d', ['other/initscripts/redhat/wicd']))
-elif os.access('/etc/gentoo-release', os.F_OK):
-    data.append(('/etc/init.d', ['other/initscripts/gentoo/wicd']))
-elif os.access('/etc/debian_version', os.F_OK):
-    data.append(('/etc/init.d', ['other/initscripts/debian/wicd']))
-elif os.access('/etc/arch-release', os.F_OK):
-    data.append(('/etc/rc.d', ['other/initscripts/arch/wicd']))
-elif os.access('/etc/slackware-version', os.F_OK):
-    data.append(('/etc/rc.d', ['other/initscripts/slackware/wicd']))
     
-# pm-utils and acpi stuff
+    # lib = '/usr/share/wicd/'
-if os.access('/etc/acpi/', os.F_OK):
+    # etc = '/etc/wicd/'
-    data.append(('/etc/acpi/resume.d', ['other/80-wicd-connect.sh']))
+    # images = '/usr/share/pixmaps/wicd/'
-    data.append(('/etc/acpi/suspend.d', ['other/50-wicd-suspend.sh']))
+    # encryption = etc + 'encryption/templates/'
+    # bin = current
+    # networks = '/var/lib/wicd/configurations/'
+    # log = '/var/log/wicd/'
+    #
+    # python = '/usr/bin/python'
+     
+    user_options = [
+        # these first bunch are DIRECTORIES.
+        # they need to end a slash ("/")
+        # which will automatically be tacked on
+        # in the finalize_options method
+        ('lib=', None, 'set the lib directory'),
+        ('share=', None, 'set the share directory'),
+        ('etc=', None, 'set the etc directory'),
+        ('images=', None, 'set the image directory'),
+        ('encryption=', None, 'set the encryption template directory'),
+        ('bin=', None, 'set the bin directory'),
+        ('sbin=', None, 'set the sbin directory'),
+        ('networks=', None, 'set the encryption configuration directory'),
+        ('log=', None, 'set the log directory'),
+        ('resume=', None, 'set the directory the resume from suspend script is stored in'),
+        ('suspend=', None, 'set the directory the  suspend script is stored in'),
+        ('dbus=', None, 'set the directory the dbus config file is stored in'),
+        ('desktop=', None, 'set the directory the .desktop file is stored in'),
+        ('icons=', None, "set the base directory for the .desktop file's icons"),
+        # ('pixmaps=', None, 'directory for images'),
+        ('translations=', None, 'set the directory translations are stored in'),
+        ('autostart=', None, 'set the directory that will be autostarted on desktop login'),
+        ('init=', None, 'set the directory for the init file'),
+        ('docdir=', None, 'set the directory for the documentation'),
+        ('mandir=', None, 'set the directory for the man pages'),
+        ('kdedir=', None, 'set the kde autostart directory'),
+        
+        # anything after here is a FILE.
+        # in other words, a slash ("/") will not automatically
+        # be added to the end of the path.
+        # do NOT remove the python= entry as it signals the beginning
+        # of the file section.
+        ('python=', None, 'set the path to the Python executable'),
+        ('pidfile=', None, 'set the pid file'),
+        ('initfile=', None, 'set the init file to use'),
+        ('initfilename=', None, "set the name of the init file (don't use)"),
+
+        # switches
+        ('no-install-init', None, "do not install the init file"),
+        ('no-install-man', None, 'do not install the man file'),
+        ('no-install-kde', None, 'do not install the kde autostart file'),
+        ('no-install-acpi', None, 'do not install the suspend.d and resume.d acpi scripts'),
+        ('no-install-install', None, 'do not install the INSTALL file'),
+        ('no-install-license', None, 'do not install the LICENSE file')
+        ]
+        
+
+    def initialize_options(self):
+        self.lib = '/usr/lib/wicd/'
+        self.share = '/usr/share/wicd/'
+        self.etc = '/etc/wicd/'
+        self.icons = '/usr/share/icons/hicolor/'
+        self.images = '/usr/share/pixmaps/wicd/'
+        self.encryption = self.etc + 'encryption/templates/'
+        self.bin = '/usr/bin/'
+        self.sbin = '/usr/sbin/'
+        self.networks = '/var/lib/wicd/configurations/'
+        self.log = '/var/log/wicd/'
+        self.resume = '/etc/acpi/resume.d/'
+        self.suspend = '/etc/acpi/suspend.d/'
+        self.dbus = '/etc/dbus-1/system.d/'
+        self.desktop = '/usr/share/applications/'
+        self.translations = '/usr/share/locale/'
+        self.autostart = '/etc/xdg/autostart/'
+        self.docdir = '/usr/share/doc/wicd/'
+        self.mandir = '/usr/share/man/'
+        self.kdedir = '/usr/share/autostart/'
+        
+        self.no_install_init = False
+        self.no_install_man = False
+        self.no_install_kde = False
+        self.no_install_acpi = False
+        self.no_install_install = False
+        self.no_install_license = False
+
+        # figure out what the default init file
+        # location should be on several different distros
+        
+        self.distro_detect_failed = False
+        
+        self.initfile = 'init/default/wicd'
+        if os.access('/etc/redhat-release', os.F_OK):
+            self.init = '/etc/rc.d/init.d/'
+            self.initfile = 'init/redhat/wicd'
+        elif os.access('/etc/SuSE-release', os.F_OK):
+            self.init = '/etc/init.d/'
+            self.initfile = 'init/suse/wicd'
+        elif os.access('/etc/fedora-release', os.F_OK):
+            self.init = '/etc/rc.d/init.d/'
+            self.initfile = 'init/redhat/wicd'
+        elif os.access('/etc/gentoo-release', os.F_OK):
+            self.init = '/etc/init.d/'
+            self.initfile = 'init/gentoo/wicd'
+        elif os.access('/etc/debian_version', os.F_OK):
+            self.init = '/etc/init.d/'
+            self.initfile = 'init/debian/wicd'
+        elif os.access('/etc/arch-release', os.F_OK):
+            self.init = '/etc/rc.d/'
+            self.init = 'init/arch/wicd'
+        elif os.access('/etc/slackware-version', os.F_OK) or \
+             os.access('/etc/slamd64-version', os.F_OK):
+            self.init = '/etc/rc.d/'
+            self.initfile = 'init/slackware/rc.wicd'
+            self.docdir = '/usr/doc/wicd-%s' % VERSION_NUM
+            self.mandir = '/usr/man/'
+            self.no_install_acpi = True
+        elif os.access('/etc/pld-release', os.F_OK):
+            self.init = '/etc/rc.d/init.d/'
+            self.initfile = 'init/pld/wicd'
+        else:
+            self.init = 'FAIL'
+            self.initfile = 'FAIL'
+            self.no_install_init = True
+            self.distro_detect_failed = True
+            print 'WARNING: Unable to detect the distribution in use.  ' + \
+                  'If you have specified --init and --initfile, configure will continue.  ' + \
+                  'Please report this warning, along with the name of your ' + \
+                  'distribution, to the wicd developers.'
+        self.python = '/usr/bin/python'
+        self.pidfile = '/var/run/wicd/wicd.pid'
+        self.initfilename = os.path.basename(self.initfile)
+
+    def finalize_options(self):
+        if self.distro_detect_failed == True:
+            if not self.no_install_init:
+                if self.init == 'FAIL' or self.initfile == 'FAIL':
+                    print 'ERROR: Failed to detect distro. Configure cannot continue.  ' + \
+                          'Please specify --init and --initfile to continue with configuration.'
+                    
+                
+        # loop through the argument definitions in user_options
+        for argument in self.user_options:
+            # argument name is the first item in the user_options list
+            # sans the = sign at the end
+            argument_name = argument[0][:-1]
+            # select the first one, which is the name of the option
+            value = getattr(self, argument_name)
+            # if the option is not python (which is not a directory)
+            if not argument[0][:-1] == "python":
+                # see if it ends with a /
+                if not value.endswith("/"):
+                    # if it doesn't, slap one on
+                    setattr(self, argument_name, value + "/")
+            else:
+                # as stated above, the python entry defines the beginning
+                # of the files section
+                return
+
+    def run(self):
+        values = list()
+        for argument in self.user_options:
+            if argument[0].endswith('='):
+                print argument[0][:-1],'is',
+                print getattr(self, argument[0][:-1])
+                values.append((argument[0][:-1], getattr(self, argument[0][:-1].replace('-','_'))))
+            else:
+                print "Found switch",argument,getattr(self, argument[0].replace('-','_'))
+                values.append((argument[0], bool(getattr(self, argument[0].replace('-','_')))))
+        
+        print 'Replacing values in template files...'
+        for item in os.listdir('in'):
+            if item.endswith('.in'):
+                print 'Replacing values in',item,
+                original_name = os.path.join('in',item)
+                item_in = open(original_name, 'r')
+                final_name = item[:-3].replace('=','/')
+                print final_name
+                item_out = open(final_name, 'w')
+                for line in item_in.readlines():
+                    for item, value in values:
+                        line = line.replace('%' + str(item.upper().replace('-','_')) + '%', str(value))
+                        
+                    item_out.write(line)
+                
+                item_out.close()
+                item_in.close()
+                shutil.copymode(original_name, final_name)
+        
+class get_translations(Command):
+    description = "download the translations from the online translator"
+         
+    user_options = []
+
+    def initialize_options(self):
+        pass
+
+    def finalize_options(self):
+        pass
+
+    def run(self):
+        import urllib, shutil
+        shutil.rmtree('translations/')
+        os.makedirs('translations')
+        filename, headers = urllib.urlretrieve('http://wicd.net/translator/get_id_list.php')
+        id_file = open(filename, 'r')
+        lines = id_file.readlines()
+        # remove the \n from the end of lines, and remove blank entries
+        lines = [ x.strip() for x in lines if not x.strip() is '' ]
+        for id in lines:
+            # http://wicd.net/translator/download_po.php?language=11
+            pofile, poheaders = urllib.urlretrieve('http://wicd.net/translator/download_po.php?language='+str(id))
+            #for i in `cat ids`; do
+            #wget "http://wicd.sourceforge.net/translator/download_po.php?language=$i&version=$1" -O "language_$i"
+            #iden=`python -c "import sys; print open('language_$i','r').readlines()[1].strip()[2:]"`
+            #mv "language_$i" po/$iden.po
+            #mkdir -p $iden/LC_MESSAGES/
+            #msgfmt --output-file=$iden/LC_MESSAGES/wicd.mo po/$iden.po
+            lang_identifier = open(pofile,'r').readlines()[1].strip()[2:]
+            shutil.move(pofile, lang_identifier+'.po')
+            print 'Got',lang_identifier
+            os.makedirs('translations/'+lang_identifier+'/LC_MESSAGES')
+            os.system('msgfmt --output-file=translations/'+lang_identifier+'/LC_MESSAGES/wicd.mo '+lang_identifier+'.po')
+            os.remove(lang_identifier+'.po')
 
 
+class uninstall(Command):
+    description = "remove Wicd using uninstall.sh and install.log"
+         
+    user_options = []
 
-setup(name="Wicd",
+    def initialize_options(self):
-      version="1.5.0",
+        pass
+
+    def finalize_options(self):
+        pass
+
+    def run(self):
+        os.system("./uninstall.sh")
+
+try:
+    import wpath
+except:
+    print '''Error importing wpath.py. You can safely ignore this
+message. It is probably because you haven't run python setup.py
+configure yet or you are running it for the first time.'''
+
+data = []
+
+try:
+    print "Using init file",(wpath.init, wpath.initfile)
+    data = [
+    (wpath.dbus, ['other/wicd.conf']),
+    (wpath.desktop, ['other/wicd.desktop']),
+    (wpath.log, []), 
+    (wpath.icons + 'scalable/apps/', ['icons/scalable/wicd-client.svg']),
+    (wpath.icons + '192x192/apps/', ['icons/192px/wicd-client.png']),
+    (wpath.icons + '128x128/apps/', ['icons/128px/wicd-client.png']),
+    (wpath.icons + '96x96/apps/', ['icons/96px/wicd-client.png']),
+    (wpath.icons + '72x72/apps/', ['icons/72px/wicd-client.png']),
+    (wpath.icons + '64x64/apps/', ['icons/64px/wicd-client.png']),
+    (wpath.icons + '48x48/apps/', ['icons/48px/wicd-client.png']),
+    (wpath.icons + '36x36/apps/', ['icons/36px/wicd-client.png']),
+    (wpath.icons + '32x32/apps/', ['icons/32px/wicd-client.png']),
+    (wpath.icons + '24x24/apps/', ['icons/24px/wicd-client.png']),
+    (wpath.icons + '22x22/apps/', ['icons/22px/wicd-client.png']),
+    (wpath.icons + '16x16/apps/', ['icons/16px/wicd-client.png']),
+    (wpath.images, [('images/' + b) for b in os.listdir('images') if not b.startswith('.')]),
+    (wpath.encryption, [('encryption/templates/' + b) for b in os.listdir('encryption/templates') if not b.startswith('.')]),
+    (wpath.networks, []),
+    (wpath.bin, ['scripts/wicd-client', ]), 
+    (wpath.sbin,  ['scripts/wicd', ]),  
+    (wpath.share, ['data/wicd.glade', ]),
+    (wpath.lib, ['wicd/wicd-client.py', 'wicd/monitor.py', 'wicd/wicd-daemon.py', 'wicd/configscript.py', 'wicd/suspend.py', 'wicd/autoconnect.py']), #'wicd/wicd-gui.py', 
+    (wpath.autostart, ['other/wicd-tray.desktop', ]),
+    ( wpath.docdir, [ 'AUTHORS', 'README' ]),
+    ]
+    piddir = os.path.dirname(wpath.pidfile)
+    if not piddir.endswith('/'):
+        piddir += '/'
+    data.append (( piddir, [] ))
+    if not wpath.no_install_install:
+        data.append(( wpath.docdir, [ 'INSTALL' ] ))
+    if not wpath.no_install_license:
+        data.append(( wpath.docdir, [ 'LICENSE' ] ))
+    if not wpath.no_install_kde:
+        data.append(( wpath.kdedir, [ 'other/wicd-tray.desktop' ]))
+    if not wpath.no_install_init:
+        data.append(( wpath.init, [ wpath.initfile ]))
+    if not wpath.no_install_man:
+        data.append(( wpath.mandir + 'man8/', [ 'man/wicd.8' ]))
+        data.append(( wpath.mandir + 'man5/', [ 'man/wicd-manager-settings.conf.5' ]))
+        data.append(( wpath.mandir + 'man5/', [ 'man/wicd-wired-settings.conf.5' ]))
+        data.append(( wpath.mandir + 'man5/', [ 'man/wicd-wireless-settings.conf.5' ]))
+    if not wpath.no_install_acpi:
+        data.append(( wpath.resume, ['other/80-wicd-connect.sh' ]))
+        data.append(( wpath.suspend, ['other/50-wicd-suspend.sh' ]))
+    print 'Creating pid path', os.path.basename(wpath.pidfile)
+    print 'Language support for',
+    for language in os.listdir('translations/'):
+        if not language.startswith('.'):
+            codes = language.split('_')
+            short_language = language
+            if codes[0].lower() == codes[1].lower():
+                short_language = codes[0].lower()
+            print short_language,
+            data.append((wpath.translations + short_language + '/LC_MESSAGES/', ['translations/' + language + '/LC_MESSAGES/wicd.mo']))
+    print
+except:
+    print '''Error setting up data array. This is normal if 
+python setup.py configure has not yet been run.'''
+
+
+    
+setup(cmdclass={'configure' : configure, 'get_translations' : get_translations, 'uninstall' : uninstall},
+      name="Wicd",
+      version=VERSION_NUM,
       description="A wireless and wired network manager",
       long_description="""A complete network connection manager
 Wicd supports wired and wireless networks, and capable of
@@ -80,11 +355,10 @@ connect at startup to any preferred network within range.
       author_email="compwiz18@users.sourceforge.net, imdano@users.sourceforge.net",
       url="http://wicd.net",
       license="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html",
-      scripts=['configscript.py', 'autoconnect.py', 'gui.py', 'wicd.py', 'daemon.py', 'suspend.py', 'monitor.py'],
+      ## scripts=['configscript.py', 'autoconnect.py', 'gui.py', 'wicd.py', 'daemon.py', 'suspend.py', 'monitor.py'],
-      py_modules=['networking', 'misc', 'wnettools', 'wpath'],
+      py_modules=['wicd.networking', 'wicd.misc', 'wicd.gui', 'wicd.wnettools', 'wicd.wpath', 'wicd.encryption', 'wicd.netentry', 'wicd.dbusmanager', 'wicd.logfile'],
       data_files=data
       )
-      
+##print "Running post-install configuration..."
-print "Running post-install configuration..."
+##os.system("other/postinst")
-#os.system("other/postinst")
+##print 'Done.'
-print 'Done.'

translations/en_US.po

@@ -1,252 +0,0 @@
-# English translations for PACKAGE package.
-# Copyright (C) 2007 THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# root <compwiz18@gmail.com>, 2007.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2007-04-13 20:40+0900\n"
-"PO-Revision-Date: 2007-04-13 20:41+0900\n"
-"Last-Translator: Adam Blackburn <compwiz18@gmail.com>\n"
-"Language-Team: English <en@translate.freefriends.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ASCII\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-#: gui.py:36
-msgid "Connect"
-msgstr "Connect"
-
-#: gui.py:37
-msgid "IP"
-msgstr "IP"
-
-#: gui.py:38
-msgid "Netmask"
-msgstr "Netmask"
-
-#: gui.py:39
-msgid "Gateway"
-msgstr "Gateway"
-
-#: gui.py:40
-msgid "DNS"
-msgstr "DNS"
-
-#: gui.py:41
-msgid "Use Static IPs"
-msgstr "Use Static IPs"
-
-#: gui.py:42
-msgid "Use Static DNS"
-msgstr "Use Static DNS"
-
-#: gui.py:43
-msgid "Use Encryption"
-msgstr "Use Encryption"
-
-#: gui.py:44
-msgid "Advanced Settings"
-msgstr "Advanced Settings"
-
-#: gui.py:45
-msgid "Wired Network"
-msgstr "Wired Network"
-
-#: gui.py:46
-msgid ""
-"To connect to a wired network, you must create a network profile.  To create "
-"a network profile, type a name that describes this network, and press Add"
-msgstr ""
-"To connect to a wired network, you must create a network profile.  To create "
-"a network profile, type a name that describes this network, and press Add"
-
-#: gui.py:47
-msgid "Automatically connect to this network"
-msgstr "Automatically connect to this network"
-
-#: gui.py:48
-msgid "Secured"
-msgstr "Secured"
-
-#: gui.py:49
-msgid "Unsecured"
-msgstr "Unsecured"
-
-#: gui.py:50
-msgid "Channel"
-msgstr "Channel"
-
-#: gui.py:51
-msgid "Preferences"
-msgstr "Preferences"
-
-#: gui.py:52
-msgid "WPA Supplicant Driver"
-msgstr "WPA Supplicant Driver"
-
-#: gui.py:53
-msgid "Wireless Interface"
-msgstr "Wireless Interface"
-
-#: gui.py:54
-msgid "Wired Interface"
-msgstr "Wired Interface"
-
-#: gui.py:55
-msgid "Hidden Network"
-msgstr "Hidden Network"
-
-#: gui.py:56
-msgid "Hidden Network ESSID"
-msgstr "Hidden Network ESSID"
-
-#: gui.py:57
-msgid "Connected to $A at $B% (IP: $C)"
-msgstr "Connected to $A at $B% (IP: $C)"
-
-#: gui.py:58
-msgid "Connected to wired network (IP: $A)"
-msgstr "Connected to wired network (IP: $A)"
-
-#: gui.py:59
-msgid "Not connected"
-msgstr "Not connected"
-
-#: gui.py:60
-msgid "No wireless networks found."
-msgstr "No wireless networks found."
-
-#: gui.py:61
-msgid "Key"
-msgstr "Key"
-
-#: gui.py:62
-msgid "Username"
-msgstr "Username"
-
-#: gui.py:63
-msgid "Password"
-msgstr "Password"
-
-#: gui.py:64
-msgid "Anonymous Identity"
-msgstr "Anonymous Identity"
-
-#: gui.py:65
-msgid "Identity"
-msgstr "Identity"
-
-#: gui.py:66
-msgid "Authentication"
-msgstr "Authentication"
-
-#: gui.py:67
-msgid "Path to PAC File"
-msgstr "Path to PAC File"
-
-#: gui.py:68
-msgid "Choose from the networks below:"
-msgstr "Choose from the networks below:"
-
-#: gui.py:69
-msgid "Connecting..."
-msgstr "Connecting..."
-
-#: gui.py:71
-msgid "0"
-msgstr "0"
-
-#: gui.py:72
-msgid "1"
-msgstr "1"
-
-#: gui.py:73
-msgid "2"
-msgstr "2"
-
-#: gui.py:74
-msgid "3"
-msgstr "3"
-
-#: gui.py:75
-msgid "4"
-msgstr "4"
-
-#: gui.py:76
-msgid "5"
-msgstr "5"
-
-#: gui.py:77
-msgid "6"
-msgstr "6"
-
-#: gui.py:78
-msgid "7"
-msgstr "7"
-
-#: gui.py:79
-msgid "8"
-msgstr "8"
-
-#: gui.py:80
-msgid "9"
-msgstr "9"
-
-#: gui.py:82
-msgid "Putting interface down..."
-msgstr "Putting interface down..."
-
-#: gui.py:83
-msgid "Resetting IP address..."
-msgstr "Resetting IP address..."
-
-#: gui.py:84
-msgid "Putting interface up..."
-msgstr "Putting interface up..."
-
-#: gui.py:85
-msgid "Removing old connection..."
-msgstr "Removing old connection..."
-
-#: gui.py:86
-msgid "Generating PSK..."
-msgstr "Generating PSK..."
-
-#: gui.py:87
-msgid "Generating WPA configuration file..."
-msgstr "Generating WPA configuration file..."
-
-#: gui.py:88
-msgid "Flushing the routing table..."
-msgstr "Flushing the routing table..."
-
-#: gui.py:89
-msgid "Configuring wireless interface..."
-msgstr "Configuring wireless interface..."
-
-#: gui.py:90
-msgid "Setting broadcast address..."
-msgstr "Setting broadcast address..."
-
-#: gui.py:91
-msgid "Setting static DNS servers..."
-msgstr "Setting static DNS servers..."
-
-#: gui.py:92
-msgid "Setting static IP addresses..."
-msgstr "Setting static IP addresses..."
-
-#: gui.py:93
-msgid "Obtaining IP address..."
-msgstr "Obtaining IP address..."
-
-#: gui.py:95
-msgid "Done connecting..."
-msgstr "Done connecting..."
-
-msgid "To connect to a wired network, you must create a network profile.  To create a network profile, type a name that describes this network, and press Add."
-msgstr "To connect to a wired network, you must create a network profile.  To create a network profile, type a name that describes this network, and press Add."

translations/es_ES.po

@@ -1,191 +0,0 @@
-# Spanish translations for PACKAGE package.
-# Copyright (C) 2007 THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# Adam Blackburn <compwiz18@gmail.com>, 2007.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2007-04-13 20:40+0900\n"
-"PO-Revision-Date: 2007-04-26 20:58+0900\n"
-"Last-Translator: Adam Blackburn <compwiz18@gmail.com>\n"
-"Language-Team: Spanish <es@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-msgid "English"
-msgstr "Español"
-
-msgid "Connect"
-msgstr "Conectar"
-
-msgid "IP"
-msgstr "IP"
-
-msgid "Netmask"
-msgstr "Máscara de subred"
-
-msgid "Gateway"
-msgstr "Puerta de enlace"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "Use Static IPs"
-msgstr "Utilizar IP estática"
-
-msgid "Use Static DNS"
-msgstr "Utilizar DNS estática"
-
-msgid "Use Encryption"
-msgstr "Utilizar cifrado"
-
-msgid "Advanced Settings"
-msgstr "Opciones Avanzadas"
-
-msgid "Wired Network"
-msgstr "Red cableada"
-
-msgid "Automatically connect to this network"
-msgstr "Conectarse automáticamente a esta red"
-
-msgid "Secured"
-msgstr "Segura"
-
-msgid "Unsecured"
-msgstr "No segura"
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Preferences"
-msgstr "Preferencias"
-
-msgid "WPA Supplicant Driver"
-msgstr "Driver WPA supplicant"
-
-msgid "Wireless Interface"
-msgstr "Interfaz inalámbrica"
-
-msgid "Wired Interface"
-msgstr "Interfaz cableada"
-
-msgid "Hidden Network"
-msgstr "Red oculta"
-
-msgid "Hidden Network ESSID"
-msgstr "ESSID de red oculta"
-
-msgid "Connected to $A at $B% (IP: $C)"
-msgstr "Conectado a $A a $B% (IP: $C)"
-
-msgid "Connected to wired network (IP: $A)"
-msgstr "Conectado a red cableada (IP: $A)"
-
-msgid "Not connected"
-msgstr "No conectado"
-
-msgid "No wireless networks found."
-msgstr "No se encontraron redes inalámbricas."
-
-msgid "Key"
-msgstr "Clave"
-
-msgid "Username"
-msgstr "Nombre de usuario"
-
-msgid "Password"
-msgstr "Contraseña"
-
-msgid "Anonymous Identity"
-msgstr "Identidad anónima"
-
-msgid "Identity"
-msgstr "Identidad"
-
-msgid "Authentication"
-msgstr "Autentificación"
-
-msgid "Path to PAC File"
-msgstr "Ruta al archivo PAC"
-
-msgid "Choose from the networks below:"
-msgstr "Seleccione una de las siguientes redes:"
-
-msgid "Connecting..."
-msgstr "Conectando..."
-
-msgid "0"
-msgstr "0"
-
-msgid "1"
-msgstr "1"
-
-msgid "2"
-msgstr "2"
-
-msgid "3"
-msgstr "3"
-
-msgid "4"
-msgstr "4"
-
-msgid "5"
-msgstr "5"
-
-msgid "6"
-msgstr "6"
-
-msgid "7"
-msgstr "7"
-
-msgid "8"
-msgstr "8"
-
-msgid "9"
-msgstr "9"
-
-msgid "Putting interface down..."
-msgstr "Desconectando interfaz..."
-
-msgid "Resetting IP address..."
-msgstr "Reseteando dirección IP..."
-
-msgid "Putting interface up..."
-msgstr "Levantando interfaz..."
-
-msgid "Removing old connection..."
-msgstr "Eliminando conexión antigua..."
-
-msgid "Generating PSK..."
-msgstr "Generando PSK..."
-
-msgid "Generating WPA configuration file..."
-msgstr "Generando archivo de configuración WPA..."
-
-msgid "Flushing the routing table..."
-msgstr "Liberando tabla de rutas..."
-
-msgid "Configuring wireless interface..."
-msgstr "Configurando red inalámbrica..."
-
-msgid "Setting broadcast address..."
-msgstr "Especificando dirección broadcast..."
-
-msgid "Setting static DNS servers..."
-msgstr "Especificando direcciones DNS estáticas..."
-
-msgid "Setting static IP addresses..."
-msgstr "Especificando direcciones IP estáticas..."
-
-msgid "Obtaining IP address..."
-msgstr "Obteniendo dirección IP..."
-
-msgid "Done connecting..."
-msgstr "Conexión realizada..."
-
-msgid "To connect to a wired network, you must create a network profile.  To create a network profile, type a name that describes this network, and press Add"
-msgstr "Para conectarse a una red cableada, debe crear un perfil de red. Para hacerlo, escriba un nombre que describa la red y pulse añadir"
-

translations/fi_FI.po

@@ -1,186 +0,0 @@
-# Finnish translations for Wicd package.
-# Copyright (C) 2007 Adam Blackburn
-# This file is distributed under the same license as the PACKAGE package.
-# Adam Blackburn <compwiz18@gmail.com>, 2007.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Wicd 1.2.6\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2007-04-13 20:40+0900\n"
-"PO-Revision-Date: 2007-04-22 00:09+0300\n"
-"Last-Translator: Jari Rahkonen <jari.rahkonen@pp1.inet.fi>\n"
-"Language-Team: Finnish\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-msgid "Connect"
-msgstr "Yhdistä"
-
-msgid "IP"
-msgstr "IP"
-
-msgid "Netmask"
-msgstr "Verkon peite"
-
-msgid "Gateway"
-msgstr "Yhdyskäytävä"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "Use Static IPs"
-msgstr "Kiinteä IP"
-
-msgid "Use Static DNS"
-msgstr "Kiinteä DNS"
-
-msgid "Use Encryption"
-msgstr "Käytä salausta"
-
-msgid "Advanced Settings"
-msgstr "Lisäasetukset"
-
-msgid "Wired Network"
-msgstr "Lähiverkko"
-
-msgid "Automatically connect to this network"
-msgstr "Yhdistä tähän verkkoon automaattisesti"
-
-msgid "Secured"
-msgstr "Salattu"
-
-msgid "Unsecured"
-msgstr "Salaamaton"
-
-msgid "Channel"
-msgstr "Kanava"
-
-msgid "Preferences"
-msgstr "Asetukset"
-
-msgid "WPA Supplicant Driver"
-msgstr "WPA Supplicant -ajuri"
-
-msgid "Wireless Interface"
-msgstr "Langaton verkkolaite"
-
-msgid "Wired Interface"
-msgstr "Lähiverkkolaite"
-
-msgid "Hidden Network"
-msgstr "Piilotettu verkko"
-
-msgid "Hidden Network ESSID"
-msgstr "Piilotetun verkon ESSID"
-
-msgid "Connected to $A at $B% (IP: $C)"
-msgstr "Yhdistetty verkkoon $A vahvuudella $B% (IP: $C)"
-
-msgid "Connected to wired network (IP: $A)"
-msgstr "Yhdistetty lähiverkkoon (IP: $A)"
-
-msgid "Not connected"
-msgstr "Ei yhdistetty"
-
-msgid "No wireless networks found."
-msgstr "Langattomia verkkoja ei löydy."
-
-msgid "Key"
-msgstr "Avain"
-
-msgid "Username"
-msgstr "Käyttäjä"
-
-msgid "Password"
-msgstr "Salasana"
-
-msgid "Anonymous Identity"
-msgstr "Anonyymi identiteetti"
-
-msgid "Identity"
-msgstr "Identiteetti"
-
-msgid "Authentication"
-msgstr "Autentikointi"
-
-msgid "Path to PAC File"
-msgstr "PAC-tiedoston polku"
-
-msgid "Choose from the networks below:"
-msgstr "Valitse verkko:"
-
-msgid "Connecting..."
-msgstr "Yhdistetään..."
-
-msgid "0"
-msgstr "0"
-
-msgid "1"
-msgstr "1"
-
-msgid "2"
-msgstr "2"
-
-msgid "3"
-msgstr "3"
-
-msgid "4"
-msgstr "4"
-
-msgid "5"
-msgstr "5"
-
-msgid "6"
-msgstr "6"
-
-msgid "7"
-msgstr "7"
-
-msgid "8"
-msgstr "8"
-
-msgid "9"
-msgstr "9"
-
-msgid "Putting interface down..."
-msgstr "Suljetaan verkkolaite..."
-
-msgid "Resetting IP address..."
-msgstr "Palautetaan IP-osoite..."
-
-msgid "Putting interface up..."
-msgstr "Käynnistetään verkkolaite..."
-
-msgid "Removing old connection..."
-msgstr "Poistetaan vanha yhteys..."
-
-msgid "Generating PSK..."
-msgstr "Luodaan PSK..."
-
-msgid "Generating WPA configuration file..."
-msgstr "Luodaan WPA-asetustiedosto..."
-
-msgid "Flushing the routing table..."
-msgstr "Tyhjennetään reititystaulu..."
-
-msgid "Configuring wireless interface..."
-msgstr "Asetetaan langaton verkkolaite..."
-
-msgid "Setting broadcast address..."
-msgstr "Asetetaan lähetysosoite..."
-
-msgid "Setting static DNS servers..."
-msgstr "Asetetaan kiinteä DNS-palvelin..."
-
-msgid "Setting static IP addresses..."
-msgstr "Asetetaan kiinteä IP-osoite..."
-
-msgid "Obtaining IP address..."
-msgstr "Haetaan IP-osoite..."
-
-msgid "Done connecting..."
-msgstr "Yhdistetty..."
-
-msgid "To connect to a wired network, you must create a network profile.  To create a network profile, type a name that describes this network, and press Add."
-msgstr "Yhdistääksesi langalliseen lähiverkkoon sinun täytyy luoda verkkoprofiili. Tee se kirjoittamalla verkkoa kuvaava nimi ja napsauttamalla Lisää-painiketta."

translations/ids

@@ -1,28 +0,0 @@
-11
-12
-13
-14
-15
-16
-17
-18
-20
-21
-31
-32
-33
-34
-35
-36
-37
-38
-39
-40
-41
-42
-43
-44
-45
-47
-48
-

translations/it_IT.po

@@ -1,191 +0,0 @@
-# Italian translations for PACKAGE package.
-# Copyright (C) 2007 THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# Adam Blackburn <compwiz18@gmail.com>, 2007.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2007-04-13 20:40+0900\n"
-"PO-Revision-Date: 2007-04-26 20:59+0900\n"
-"Last-Translator: Adam Blackburn <compwiz18@gmail.com>\n"
-"Language-Team: Italian <tp@lists.linux.it>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-msgid "English"
-msgstr "Italiano"
-
-msgid "Connect"
-msgstr "Connetti"
-
-msgid "IP"
-msgstr "IP"
-
-msgid "Netmask"
-msgstr "Netmask"
-
-msgid "Gateway"
-msgstr "Gateway"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "Use Static IPs"
-msgstr "Usa IP statici"
-
-msgid "Use Static DNS"
-msgstr "Usa DNS statici"
-
-msgid "Use Encryption"
-msgstr "Usa cifratura"
-
-msgid "Advanced Settings"
-msgstr "Opzioni Avanzate"
-
-msgid "Wired Network"
-msgstr "Rete cablata"
-
-msgid "Automatically connect to this network"
-msgstr "Connetti automaticamente a questa rete"
-
-msgid "Secured"
-msgstr "Sicura"
-
-msgid "Unsecured"
-msgstr "Insicura"
-
-msgid "Channel"
-msgstr "Canale"
-
-msgid "Preferences"
-msgstr "Opzioni"
-
-msgid "WPA Supplicant Driver"
-msgstr "Driver WPA Supplicant"
-
-msgid "Wireless Interface"
-msgstr "Interfaccia Wireless"
-
-msgid "Wired Interface"
-msgstr "Interfaccia Cablata"
-
-msgid "Hidden Network"
-msgstr "Rete Nascosta"
-
-msgid "Hidden Network ESSID"
-msgstr "ESSID Rete Nascosta"
-
-msgid "Connected to $A at $B% (IP: $C)"
-msgstr "Connesso a $A a $B% (IP: $C)"
-
-msgid "Connected to wired network (IP: $A)"
-msgstr "Connesso a rete cablata"
-
-msgid "Not connected"
-msgstr "Non connesso"
-
-msgid "No wireless networks found."
-msgstr "Nessuna rete wireless trovata"
-
-msgid "Key"
-msgstr "Chiave"
-
-msgid "Username"
-msgstr "Username"
-
-msgid "Password"
-msgstr "Password"
-
-msgid "Anonymous Identity"
-msgstr "Identità Anonima"
-
-msgid "Identity"
-msgstr "Identità"
-
-msgid "Authentication"
-msgstr "Autenticazione"
-
-msgid "Path to PAC File"
-msgstr "Indirizzo del file PAC"
-
-msgid "Choose from the networks below:"
-msgstr "Scegliere dalle seguenti reti:"
-
-msgid "Connecting..."
-msgstr "Connessione in corso..."
-
-msgid "0"
-msgstr "0"
-
-msgid "1"
-msgstr "1"
-
-msgid "2"
-msgstr "2"
-
-msgid "3"
-msgstr "3"
-
-msgid "4"
-msgstr "4"
-
-msgid "5"
-msgstr "5"
-
-msgid "6"
-msgstr "6"
-
-msgid "7"
-msgstr "7"
-
-msgid "8"
-msgstr "8"
-
-msgid "9"
-msgstr "9"
-
-msgid "Putting interface down..."
-msgstr "Disabilitazione interfaccia in corso..."
-
-msgid "Resetting IP address..."
-msgstr "Reimpostazione indirizzo IP in corso..."
-
-msgid "Putting interface up..."
-msgstr "Abilitazione interfaccia in corso..."
-
-msgid "Removing old connection..."
-msgstr "Eliminazione vecchia connessione in corso..."
-
-msgid "Generating PSK..."
-msgstr "Creazione PSK in corso..."
-
-msgid "Generating WPA configuration file..."
-msgstr "Creazione file di configurazione WPA in corso..."
-
-msgid "Flushing the routing table..."
-msgstr "Pulizia tabelle di routing in corso..."
-
-msgid "Configuring wireless interface..."
-msgstr "Configurazione interfaccia wireless in corso..."
-
-msgid "Setting broadcast address..."
-msgstr "Impostazione indirizzo di broadcast in corso..."
-
-msgid "Setting static DNS servers..."
-msgstr "Impostazione server DNS statici in corso..."
-
-msgid "Setting static IP addresses..."
-msgstr "Impostazione indirizzi IP statici in corso..."
-
-msgid "Obtaining IP address..."
-msgstr "Attesa indirizzo IP..."
-
-msgid "Done connecting..."
-msgstr "Connessione completata..."
-
-msgid "To connect to a wired network, you must create a network profile.  To create a network profile, type a name that describes this network, and press Add."
-msgstr "Per connettersi ad una rete cablata è necessario creare un profilo di rete. Per creare un profilo di rete, inserire un nome descrittivo della rete e premere aggiungi"
-

translations/nl_NL.po

@@ -1,186 +0,0 @@
-# Dutch translations for PACKAGE package.
-# Copyright (C) 2007 THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# Adam Blackburn <compwiz18@gmail.com>, 2007.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2007-04-18 20:40+0900\n"
-"PO-Revision-Date: 2007-04-19 07:57+0900\n"
-"Last-Translator: Ravan <ravanhagen@gmail.com>\n"
-"Language-Team: Dutch\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-msgid "Connect"
-msgstr "Verbinden"
-
-msgid "IP"
-msgstr "IP"
-
-msgid "Netmask"
-msgstr "Netmasker"
-
-msgid "Gateway"
-msgstr "Gateway"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "Use Static IPs"
-msgstr "Gebruik Statisch IP"
-
-msgid "Use Static DNS"
-msgstr "Gebruik Statische DNS"
-
-msgid "Use Encryption"
-msgstr "Gebruik Encryptie"
-
-msgid "Advanced Settings"
-msgstr "Geavanceerde Instellingen"
-
-msgid "Wired Network"
-msgstr "Locaal Netwerk"
-
-msgid "Automatically connect to this network"
-msgstr "Automatisch verbinden met dit netwerk"
-
-msgid "Secured"
-msgstr "Beveiligd"
-
-msgid "Unsecured"
-msgstr "Onbeveiligd"
-
-msgid "Channel"
-msgstr "Kanaal"
-
-msgid "Preferences"
-msgstr "Voorkeuren"
-
-msgid "WPA Supplicant Driver"
-msgstr "WPA Supplicant Stuurprogramma"
-
-msgid "Wireless Interface"
-msgstr "Draadloze Aansluiting"
-
-msgid "Wired Interface"
-msgstr "Draad Aansluiting"
-
-msgid "Hidden Network"
-msgstr "Verborgen Netwerk"
-
-msgid "Hidden Network ESSID"
-msgstr "Verborgen Netwerk ESSID"
-
-msgid "Connected to $A at $B% (IP: $C)"
-msgstr "Verbonden met $A op $B% (IP: $C)"
-
-msgid "Connected to wired network (IP: $A)"
-msgstr "Verbonden met LAN (IP: $A)"
-
-msgid "Not connected"
-msgstr "Niet verbonden"
-
-msgid "No wireless networks found."
-msgstr "Geen draadloze netwerken gevonden."
-
-msgid "Key"
-msgstr "Sleutel"
-
-msgid "Username"
-msgstr "Gebruikersnaam"
-
-msgid "Password"
-msgstr "Wachtwoord"
-
-msgid "Anonymous Identity"
-msgstr "Anonieme Identiteit"
-
-msgid "Identity"
-msgstr "Identiteit"
-
-msgid "Authentication"
-msgstr "Verificatie"
-
-msgid "Path to PAC File"
-msgstr "Pad naar PAC bestand"
-
-msgid "Choose from the networks below:"
-msgstr "Kies uit de volgende netwerken:"
-
-msgid "Connecting..."
-msgstr "Verbinden..."
-
-msgid "0"
-msgstr "0"
-
-msgid "1"
-msgstr "1"
-
-msgid "2"
-msgstr "2"
-
-msgid "3"
-msgstr "3"
-
-msgid "4"
-msgstr "4"
-
-msgid "5"
-msgstr "5"
-
-msgid "6"
-msgstr "6"
-
-msgid "7"
-msgstr "7"
-
-msgid "8"
-msgstr "8"
-
-msgid "9"
-msgstr "9"
-
-msgid "Putting interface down..."
-msgstr "Aansluiting verbreken..."
-
-msgid "Resetting IP address..."
-msgstr "Herstellen IP adress..."
-
-msgid "Putting interface up..."
-msgstr "Aansluiting verbinden..."
-
-msgid "Removing old connection..."
-msgstr "Verwijderen oude verbinding..."
-
-msgid "Generating PSK..."
-msgstr "Genereren PSK..."
-
-msgid "Generating WPA configuration file..."
-msgstr "Genereren WPA configuratiebestand..."
-
-msgid "Flushing the routing table..."
-msgstr "Opschonen routing tabellen..."
-
-msgid "Configuring wireless interface..."
-msgstr "Configureren draadloze aansluiting..."
-
-msgid "Setting broadcast address..."
-msgstr "Instellen broadcast adres..."
-
-msgid "Setting static DNS servers..."
-msgstr "Instellen statische DNS server..."
-
-msgid "Setting static IP addresses..."
-msgstr "Instellen statisch IP adress..."
-
-msgid "Obtaining IP address..."
-msgstr "Verkrijgen IP adres..."
-
-msgid "Done connecting..."
-msgstr "Aansluiten gereed..."
-
-msgid "To connect to a wired network, you must create a network profile.  To create a network profile, type a name that describes this network, and press Add."
-msgstr "Om met een bedraad netwerk te verbinding moet een netwerkprofiel worden aangemaakt. Type hiervoor een naam om het netwerk te beschrijven en klik Toevoegen."

translations/pl_PL.po

@@ -1,189 +0,0 @@
-# Polish translations for PACKAGE package.
-# Copyright (C) 2007 THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-#  <compwiz18@gmail.com>, 2007.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2007-04-13 20:40+0900\n"
-"PO-Revision-Date: 2007-05-27 16:52+0900\n"
-"Last-Translator:  <compwiz18@gmail.com>\n"
-"Language-Team: Polish <translation-team-pl@lists.sourceforge.net>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-msgid "Connect"
-msgstr "Połącz"
-
-msgid "IP"
-msgstr "IP"
-
-msgid "Netmask"
-msgstr "Maska podsieci"
-
-msgid "Gateway"
-msgstr "Brama"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "Use Static IPs"
-msgstr "Użyj Statycznych IP"
-
-msgid "Use Static DNS"
-msgstr "Użyj Statycznych DNS"
-
-msgid "Use Encryption"
-msgstr "Użyj Szyfrowania"
-
-msgid "Advanced Settings"
-msgstr "Ustawienia Zaawansowane"
-
-msgid "Wired Network"
-msgstr "Sieć Przewodowa"
-
-msgid "Automatically connect to this network"
-msgstr "Automatycznie połącz z tą siecią"
-
-msgid "Secured"
-msgstr "Zabezpieczona"
-
-msgid "Unsecured"
-msgstr "Niezabezpieczona"
-
-msgid "Channel"
-msgstr "Kanał"
-
-msgid "Preferences"
-msgstr "Preferencje"
-
-msgid "WPA Supplicant Driver"
-msgstr "Sterownik WPA Supplicant"
-
-msgid "Wireless Interface"
-msgstr "Interfejs Bezprzewodowy"
-
-msgid "Wired Interface"
-msgstr "Interfejs Przewodowy"
-
-msgid "Hidden Network"
-msgstr "Ukryta Sieć"
-
-msgid "Hidden Network ESSID"
-msgstr "ESSID Ukrytej Sieci"
-
-msgid "Connected to $A at $B% (IP: $C)"
-msgstr "Połączony z $A sygnał $B% (IP: $C)"
-
-msgid "Connected to wired network (IP: $A)"
-msgstr "Połączony z siecią przewodową (IP: $A)"
-
-msgid "Not connected"
-msgstr "Brak połączenia"
-
-msgid "No wireless networks found."
-msgstr "Nie znaleziono sieci bezprzewodowych."
-
-msgid "Key"
-msgstr "Klucz"
-
-msgid "Username"
-msgstr "Nazwa Użytkownika"
-
-msgid "Password"
-msgstr "Hasło"
-
-msgid "Anonymous Identity"
-msgstr "Anonimowa Tożsamość"
-
-msgid "Identity"
-msgstr "Tożsamość"
-
-msgid "Authentication"
-msgstr "Autentykacja"
-
-msgid "Path to PAC File"
-msgstr "Ścieżka do pliku PAC"
-
-msgid "Choose from the networks below:"
-msgstr "Wybierz sieci:"
-
-msgid "Connecting..."
-msgstr "Łączenie..."
-
-msgid "0"
-msgstr "0"
-
-msgid "1"
-msgstr "1"
-
-msgid "2"
-msgstr "2"
-
-msgid "3"
-msgstr "3"
-
-msgid "4"
-msgstr "4"
-
-msgid "5"
-msgstr "5"
-
-msgid "6"
-msgstr "6"
-
-msgid "7"
-msgstr "7"
-
-msgid "8"
-msgstr "8"
-
-msgid "9"
-msgstr "9"
-
-msgid "Putting interface down..."
-msgstr "Wyłączanie interfejsu..."
-
-msgid "Resetting IP address..."
-msgstr "Resetowanie adresu IP..."
-
-msgid "Putting interface up..."
-msgstr "Włączanie interfejsu..."
-
-msgid "Removing old connection..."
-msgstr "Usuwanie starego połączenia..."
-
-msgid "Generating PSK..."
-msgstr "Generowanie PSK..."
-
-msgid "Generating WPA configuration file..."
-msgstr "Generowanie pliku konfiguracyjnego WPA..."
-
-msgid "Flushing the routing table..."
-msgstr "Czyszczenie tablicy tras..."
-
-msgid "Configuring wireless interface..."
-msgstr "Konfigurowanie interfejsu bezprzewodowego..."
-
-msgid "Setting broadcast address..."
-msgstr "Ustawianie adresu rozgłaszania..."
-
-msgid "Setting static DNS servers..."
-msgstr "Ustawianie statycznych DNS..."
-
-msgid "Setting static IP addresses..."
-msgstr "Ustawianie statycznych adresów IP..."
-
-msgid "Obtaining IP address..."
-msgstr "Ustalanie adresu IP..."
-
-msgid "Done connecting..."
-msgstr "Połączono..."
-
-msgid "To connect to a wired network, you must create a network profile.  To create a network profile, type a name that describes this network, and press Add."
-msgstr "Aby połączyć się z siecią przewodową musisz stworzyć profil sieciowy. Aby stworzyć profil sieciowy wpisz nazwę opisującą sieć i naciśnij Dodaj."
-

translations/sv_SE.po

@@ -1,186 +0,0 @@
-# Northern Sami translations for PACKAGE package.
-# Copyright (C) 2007 THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# Adam Blackburn <compwiz18@gmail.com>, 2007.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2007-04-13 20:40+0900\n"
-"PO-Revision-Date: 2007-04-14 07:57+0900\n"
-"Last-Translator: Adam Blackburn <compwiz18@gmail.com>\n"
-"Language-Team: Northern Sami\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-msgid "Connect"
-msgstr "Anslut"
-
-msgid "IP"
-msgstr "IP"
-
-msgid "Netmask"
-msgstr "Subnät"
-
-msgid "Gateway"
-msgstr "Gateway"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "Use Static IPs"
-msgstr "Använd Fast IP"
-
-msgid "Use Static DNS"
-msgstr "Använd Statisk DNS"
-
-msgid "Use Encryption"
-msgstr "Använd Kryptering"
-
-msgid "Advanced Settings"
-msgstr "Avancerade Inställningar"
-
-msgid "Wired Network"
-msgstr "Lokalt Nätverk"
-
-msgid "Automatically connect to this network"
-msgstr "Anslut automatiskt till detta nätverk "
-
-msgid "Secured"
-msgstr "Krypterat"
-
-msgid "Unsecured"
-msgstr "Okrypterat"
-
-msgid "Channel"
-msgstr "Kanal"
-
-msgid "Preferences"
-msgstr "Egenskaper"
-
-msgid "WPA Supplicant Driver"
-msgstr "WPA Supplicant Drivrutin"
-
-msgid "Wireless Interface"
-msgstr "Trådlöst Nätverk"
-
-msgid "Wired Interface"
-msgstr "Ethernet"
-
-msgid "Hidden Network"
-msgstr "Dold Nätverk"
-
-msgid "Hidden Network ESSID"
-msgstr "Dold Nätverks ESSID"
-
-msgid "Connected to $A at $B% (IP: $C)"
-msgstr "Anslut till $A Signal $B% (IP: $C)"
-
-msgid "Connected to wired network (IP: $A)"
-msgstr "Anslut till lokalt nätverk(IP: $A)"
-
-msgid "Not connected"
-msgstr "Ej ansluten"
-
-msgid "No wireless networks found."
-msgstr "Inga trådlösa nätverk funna."
-
-msgid "Key"
-msgstr "Nyckel"
-
-msgid "Username"
-msgstr "Användar namn"
-
-msgid "Password"
-msgstr "Lösenord"
-
-msgid "Anonymous Identity"
-msgstr "Anonym Identitet"
-
-msgid "Identity"
-msgstr "Identitet"
-
-msgid "Authentication"
-msgstr "Verifiering"
-
-msgid "Path to PAC File"
-msgstr "Sökväg till PAC fil"
-
-msgid "Choose from the networks below:"
-msgstr "Välj från nätverken nedan:"
-
-msgid "Connecting..."
-msgstr "Ansluter..."
-
-msgid "0"
-msgstr "0"
-
-msgid "1"
-msgstr "1"
-
-msgid "2"
-msgstr "2"
-
-msgid "3"
-msgstr "3"
-
-msgid "4"
-msgstr "4"
-
-msgid "5"
-msgstr "5"
-
-msgid "6"
-msgstr "6"
-
-msgid "7"
-msgstr "7"
-
-msgid "8"
-msgstr "8"
-
-msgid "9"
-msgstr "9"
-
-msgid "Putting interface down..."
-msgstr "Kopplar ner ansluting..."
-
-msgid "Resetting IP address..."
-msgstr "Återställer IP adress..."
-
-msgid "Putting interface up..."
-msgstr "Kopplar upp anslutning..."
-
-msgid "Removing old connection..."
-msgstr "Tar bort gamla anslutningen..."
-
-msgid "Generating PSK..."
-msgstr "Genererar PSK..."
-
-msgid "Generating WPA configuration file..."
-msgstr "Genererar WPA Konfigurations fil..."
-
-msgid "Flushing the routing table..."
-msgstr "Tömmer routing tabellen..."
-
-msgid "Configuring wireless interface..."
-msgstr "Konfigurerar trådlös anslutning..."
-
-msgid "Setting broadcast address..."
-msgstr "Sätter broadcast adress..."
-
-msgid "Setting static DNS servers..."
-msgstr "Sätter statisk DNS server..."
-
-msgid "Setting static IP addresses..."
-msgstr "Sätter statisk IP adress..."
-
-msgid "Obtaining IP address..."
-msgstr "Väntar på IP adress..."
-
-msgid "Done connecting..."
-msgstr "Ansluting klar..."
-
-msgid "To connect to a wired network, you must create a network profile.  To create a network profile, type a name that describes this network, and press Add."
-msgstr "För att ansluta till ett lokalt nätverk, måste du skapa en profile. För att skapa en profile, ange ett namn / beskrivning för detta nätverk, sedan tryck på lägg till."

translations/wicd.pot

@@ -1,183 +0,0 @@
-msgid "Connect"
-msgstr ""
-
-msgid "IP"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "Use Static IPs"
-msgstr ""
-
-msgid "Use Static DNS"
-msgstr ""
-
-msgid "Use Encryption"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Wired Network"
-msgstr ""
-
-msgid "Automatically connect to this network"
-msgstr ""
-
-msgid "Secured"
-msgstr ""
-
-msgid "Unsecured"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Preferences"
-msgstr ""
-
-msgid "WPA Supplicant Driver"
-msgstr ""
-
-msgid "Wireless Interface"
-msgstr ""
-
-msgid "Wired Interface"
-msgstr ""
-
-msgid "Always show wired interface"
-msgstr ""
-
-msgid "Hidden Network"
-msgstr ""
-
-msgid "Hidden Network ESSID"
-msgstr ""
-
-msgid "Connected to $A at $B% (IP: $C)"
-msgstr ""
-
-msgid "Connected to wired network (IP: $A)"
-msgstr ""
-
-msgid "Not connected"
-msgstr ""
-
-msgid "No wireless networks found."
-msgstr ""
-
-msgid "Key"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Anonymous Identity"
-msgstr ""
-
-msgid "Identity"
-msgstr ""
-
-msgid "Authentication"
-msgstr ""
-
-msgid "Path to PAC File"
-msgstr ""
-
-msgid "Choose from the networks below:"
-msgstr ""
-
-msgid "Connecting..."
-msgstr ""
-
-msgid "0"
-msgstr ""
-
-msgid "1"
-msgstr ""
-
-msgid "2"
-msgstr ""
-
-msgid "3"
-msgstr ""
-
-msgid "4"
-msgstr ""
-
-msgid "5"
-msgstr ""
-
-msgid "6"
-msgstr ""
-
-msgid "7"
-msgstr ""
-
-msgid "8"
-msgstr ""
-
-msgid "9"
-msgstr ""
-
-msgid "Putting interface down..."
-msgstr ""
-
-msgid "Resetting IP address..."
-msgstr ""
-
-msgid "Putting interface up..."
-msgstr ""
-
-msgid "Removing old connection..."
-msgstr ""
-
-msgid "Generating PSK..."
-msgstr ""
-
-msgid "Generating WPA configuration file..."
-msgstr ""
-
-msgid "Flushing the routing table..."
-msgstr ""
-
-msgid "Configuring wireless interface..."
-msgstr ""
-
-msgid "Setting broadcast address..."
-msgstr ""
-
-msgid "Setting static DNS servers..."
-msgstr ""
-
-msgid "Setting static IP addresses..."
-msgstr ""
-
-msgid "Obtaining IP address..."
-msgstr ""
-
-msgid "Done connecting..."
-msgstr ""
-
-msgid "To connect to a wired network, you must create a network profile.  To create a network profile, type a name that describes this network, and press Add."
-msgstr ""
-
-msgid "Always show wired interface"
-msgstr ""
-
-msgid "Wicd needs to access your computer's network cards."
-msgstr ""
-
-msgid "Create Ad-Hoc network"
-msgstr ""
-

uninstall.sh

@@ -0,0 +1,84 @@
+#!/bin/bash
+
+# Copyright 2008 Robby Workman <rworkman@slackware.com>, Northport, AL, USA
+# Copyright 2008 Alan Hicks <alan@slackware.com>, Lizella, GA, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+CWD=$(pwd)
+
+INSTALL_LOG=${INSTALL_LOG:-"$CWD/install.log"}
+UNINSTALL_LOG=${UNINSTALL_LOG:-"$CWD/uninstall.log"}
+
+DIR_LIST=$(mktemp)
+FILE_LIST=$(mktemp)
+
+trap "do_cleanup ; exit 0" EXIT;
+trap "do_cleanup ; exit 1" SIGINT SIGTERM;
+
+error_nolog() {
+  echo "There does not appear to be an installation log present, most"
+  echo "likely because you did not install Wicd from this directory."
+  do_cleanup
+  exit 1
+}
+
+do_success() {
+  echo "You have successfully uninstalled Wicd."
+  echo "Configuration files added after installation were NOT removed."
+  exit 0
+}
+   
+get_contents() {
+  while read LINE ; do
+    if [ -d "$LINE" ]; then
+      # $LINE is a directory
+      echo "$LINE" >> "$DIR_LIST"
+    else 
+      # $LINE is a file or symlink or the like
+      echo "$LINE" >> "$FILE_LIST"
+    fi
+    # Now handle parent directories
+    RECURSE=true
+    while [ "$RECURSE" = "true" ]; do
+      LINE="$(dirname $LINE)"
+      if [ ! "$LINE" = "/" ]; then
+        echo "$LINE" >> "$DIR_LIST"
+      else
+        RECURSE=false
+      fi
+    done
+  done < $INSTALL_LOG
+}
+
+do_uninstall() {
+  cat $FILE_LIST | xargs rm -f &> $UNINSTALL_LOG
+  cat $DIR_LIST | sort -ur | xargs rmdir &> $UNINSTALL_LOG
+}
+
+do_cleanup() {
+  rm -f $FILE_LIST $DIR_LIST 2>/dev/null
+}
+
+[ -e $INSTALL_LOG ] || error_nolog
+get_contents
+do_uninstall
+do_cleanup
+do_success
+

wicd/configscript.py

@@ -33,8 +33,8 @@ import ConfigParser
 import dbus
 import gtk.glade
 
-import wpath
+import wicd.wpath as wpath
-import misc
+import wicd.misc as misc
 
 _ = misc.get_gettext()
 

wicd/daemon.py

@@ -52,10 +52,10 @@ else:
     DBusGMainLoop(set_as_default=True)
 
 # wicd specific libraries
-import wpath
+import wicd.wpath as wpath
-import networking
+import wicd.networking as networking
-import misc
+import wicd.misc as misc
-from logfile import ManagedStdio
+from wicd.logfile import ManagedStdio
 
 if __name__ == '__main__':
     wpath.chdir(__file__)

wicd/gui.py

@@ -34,12 +34,12 @@ import gtk.glade
 from dbus import DBusException
 from dbus import version as dbus_version
 
-import misc
+import wicd.misc
-import wpath
+import wicd.wpath
-from misc import noneToString, noneToBlankString, stringToBoolean, checkboxTextboxToggle
+from wicd.misc import noneToString, noneToBlankString, stringToBoolean, checkboxTextboxToggle
-from netentry import WiredNetworkEntry, WirelessNetworkEntry
+from wicd.netentry import WiredNetworkEntry, WirelessNetworkEntry
-from prefs import PreferencesDialog
+from wicd.prefs import PreferencesDialog
-from dbusmanager import DBusManager
+from wicd.dbusmanager import DBusManager
 
 if __name__ == '__main__':
     wpath.chdir(__file__)

wicd/misc.py

@@ -18,7 +18,6 @@
 #
 
 import os
-import wpath
 import locale
 import gettext
 import sys
@@ -26,6 +25,8 @@ from subprocess import Popen, STDOUT, PIPE
 import subprocess
 import commands
 
+import wicd.wpath as wpath
+
 if __name__ == '__main__':
     wpath.chdir(__file__)
     

wicd/monitor.py

@@ -33,8 +33,8 @@ else:
     from dbus.mainloop.glib import DBusGMainLoop
     DBusGMainLoop(set_as_default=True)
 
-import wpath
+import wicd.wpath as wpath
-import misc
+import wicd.misc as misc
 
 misc.RenameProcess("wicd-monitor")
 

wicd/netentry.py

@@ -17,9 +17,9 @@
 
 import gtk
 
-import misc
+import wicd.misc as misc
-from misc import noneToString, stringToNone, noneToBlankString, stringToBoolean
+from wicd.misc import noneToString, stringToNone, noneToBlankString, stringToBoolean
-import wpath
+import wicd.wpath as wpath
 
 language = misc.get_language_list_gui()
 

wicd/networking.py

@@ -44,11 +44,12 @@ class WiredConnectThread() -- Connection thread for wired
 import re
 import threading
 import thread
-import misc
-import wnettools
-import wpath
 import time
 
+import wicd.misc as misc
+import wicd.wnettools as wnettools
+import wicd.wpath as wpath
+
 if __name__ == '__main__':
     wpath.chdir(__file__)
 

wicd/prefs.py

@@ -27,8 +27,8 @@ import gtk
 import gobject
 import pango
 
-import misc
+import wicd.misc
-from misc import checkboxTextboxToggle, noneToBlankString
+from wicd.misc import checkboxTextboxToggle, noneToBlankString
 
 daemon = None
 wireless = None
@@ -265,4 +265,4 @@ class PreferencesDialog(object):
         self.set_label("pref_dns3_label", language['dns'] + ' ' + language['3'])
         self.set_label("pref_wifi_label", language['wireless_interface'] + ':')
         self.set_label("pref_wired_label", language['wired_interface'] + ':')
-        self.set_label("pref_driver_label", language['wpa_supplicant_driver'] + ':')
+        self.set_label("pref_driver_label", language['wpa_supplicant_driver'] + ':')

wicd/wicd.py

@@ -46,10 +46,10 @@ from dbus import DBusException
 from dbus import version as dbus_version
 
 # Wicd specific imports
-import wpath
+import wicd.wpath as wpath
-import misc
+import wicd.misc as misc
-import gui
+import wicd.gui as gui
-from dbusmanager import DBusManager
+from wicd.dbusmanager import DBusManager
 
 # Import egg.trayicon if we're using an older gtk version
 if not (gtk.gtk_version[0] >= 2 and gtk.gtk_version[1] >= 10):

wicd/wnettools.py

@@ -39,8 +39,8 @@ import fcntl
 import struct
 import array
 
-import wpath
+import wicd.wpath as wpath
-import misc
+import wicd.misc as misc
 
 # Compile the regex patterns that will be used to search the output of iwlist
 # scan for info these are well tested, should work on most cards