Launchpad automatic translations update.

po/ko.po

@@ -9,10 +9,11 @@ msgstr ""
 "PO-Revision-Date: 2011-09-18 16:12+0000\n"
 "Last-Translator: David Paleino <dapal@debian.org>\n"
 "Language-Team: ko <LL@li.org>\n"
-"Plural-Forms: nplurals=1; plural=0\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=utf-8\n"
 "Content-Transfer-Encoding: 8bit\n"
+"X-Launchpad-Export-Date: 2011-10-20 04:47+0000\n"
+"X-Generator: Launchpad (build 14165)\n"
 "Generated-By: Babel 0.9.6\n"
 
 #: gtk/wicd-client.py:608
@@ -187,8 +188,8 @@ msgstr ""
 
 #: gtk/gui.py:65 gtk/wicd-client.py:952
 msgid ""
-"Could not connect to wicd's D-Bus interface. Check the wicd log for error"
-" messages."
+"Could not connect to wicd's D-Bus interface. Check the wicd log for error "
+"messages."
 msgstr "wicd D-Bus 인터페이스에 연결 할 수 없습니다. 로그를 확인하십시오."
 
 #: gtk/netentry.py:302 gtk/netentry.py:410
@@ -203,12 +204,12 @@ msgstr "Ad-hoc 네트워크 만들기"
 
 #: curses/wicd-curses.py:99
 msgid ""
-"DBus failure! This is most likely caused by the wicd daemon stopping "
-"while wicd-curses is running. Please restart the daemon, and then restart"
-" wicd-curses."
+"DBus failure! This is most likely caused by the wicd daemon stopping while "
+"wicd-curses is running. Please restart the daemon, and then restart wicd-"
+"curses."
 msgstr ""
-"DBus 오류! wicd-curses가 실행 중일 때 wicd 데몬이 멈춘 것 같습니다. 데몬을 다시 시작하고 wicd-"
-"curses를 다시 시작하십시오"
+"DBus 오류! wicd-curses가 실행 중일 때 wicd 데몬이 멈춘 것 같습니다. 데몬을 다시 시작하고 wicd-curses를 "
+"다시 시작하십시오"
 
 #: curses/prefs_curses.py:92
 msgid "DHCP Client"
@@ -271,8 +272,8 @@ msgstr "연결 완료됨..."
 
 #: curses/wicd-curses.py:1051
 msgid ""
-"ERROR: wicd-curses was denied access to the wicd daemon: please check "
-"that your user is in the \"$A\" group."
+"ERROR: wicd-curses was denied access to the wicd daemon: please check that "
+"your user is in the \"$A\" group."
 msgstr "오류: wicd-curses에서 wicd 데몬에 접근할 수 없습니다. 사용자가 $A 그룹에 추가되어 있는지 확인하십시오."
 
 #: curses/wicd-curses.py:460 gtk/gui.py:266
@@ -393,13 +394,12 @@ msgstr "IP 주소 얻는 중..."
 
 #: curses/wicd-curses.py:277
 msgid ""
-"Once there, you can adjust (or add) the \"beforescript\", "
-"\"afterscript\", \"predisconnectscript\" and \"postdisconnectscript\" "
-"variables as needed, to change the preconnect, postconnect, predisconnect"
-" and postdisconnect scripts respectively.  Note that you will be "
-"specifying the full path to the scripts - not the actual script contents."
-"  You will need to add/edit the script contents separately.  Refer to the"
-" wicd manual page for more information."
+"Once there, you can adjust (or add) the \"beforescript\", \"afterscript\", "
+"\"predisconnectscript\" and \"postdisconnectscript\" variables as needed, to "
+"change the preconnect, postconnect, predisconnect and postdisconnect scripts "
+"respectively.  Note that you will be specifying the full path to the scripts "
+"- not the actual script contents.  You will need to add/edit the script "
+"contents separately.  Refer to the wicd manual page for more information."
 msgstr ""
 
 #: wicd/translations.py:81
@@ -616,8 +616,8 @@ msgstr "사용자가 종료함"
 
 #: gtk/gui.py:85 gtk/wicd-client.py:981
 msgid ""
-"The wicd daemon has shut down. The UI will not function properly until it"
-" is restarted."
+"The wicd daemon has shut down. The UI will not function properly until it is "
+"restarted."
 msgstr "wicd 데몬이 종료되었습니다. 데몬을 다시 시작할 때까지 인터페이스가 작동하지 않을 것입니다."
 
 #: curses/netentry_curses.py:368 gtk/gui.py:700 gtk/netentry.py:496
@@ -627,22 +627,22 @@ msgstr "이 네트워크에 연결하려면 암호화가 필요합니다."
 #: curses/wicd-curses.py:271
 msgid ""
 "To avoid various complications, wicd-curses does not support directly "
-"editing the scripts. However, you can edit them manually. First, (as "
-"root), open the \"$A\" config file, and look for the section labeled by "
-"the $B in question. In this case, this is:"
+"editing the scripts. However, you can edit them manually. First, (as root), "
+"open the \"$A\" config file, and look for the section labeled by the $B in "
+"question. In this case, this is:"
 msgstr ""
 
 #: gtk/netentry.py:634
 msgid ""
-"To connect to a wired network, you must create a network profile. To "
-"create a network profile, type a name that describes this network, and "
-"press Add."
-msgstr "유선 네트워크에 연결할려면 프로필을 만들어야 합니다. 네트워크 프로필을 만들려면 프로필 이름을 입력한 다음 추가를 누르십시오."
+"To connect to a wired network, you must create a network profile. To create "
+"a network profile, type a name that describes this network, and press Add."
+msgstr ""
+"유선 네트워크에 연결할려면 프로필을 만들어야 합니다. 네트워크 프로필을 만들려면 프로필 이름을 입력한 다음 추가를 누르십시오."
 
 #: gtk/wicd-client.py:94
 msgid ""
-"Unable to contact the Wicd daemon due to an access denied error from "
-"DBus. Please check that your user is in the $A group."
+"Unable to contact the Wicd daemon due to an access denied error from DBus. "
+"Please check that your user is in the $A group."
 msgstr "DBus 접근 불가 오류로 wicd 데몬에 접근할 수 없습니다. 사용자가 $A 그룹에 추가되어 있는지 확인하십시오."
 
 #: curses/wicd-curses.py:352 gtk/netentry.py:961 gtk/netentry.py:1083
@@ -794,8 +794,8 @@ msgstr "가능한 한 WPA 도우미 드라이버로 wext를 사용하십시오"
 
 #: curses/wicd-curses.py:427
 msgid ""
-"wicd-curses does not support deleting the last wired profile.  Try "
-"renaming it (\"F2\")"
+"wicd-curses does not support deleting the last wired profile.  Try renaming "
+"it (\"F2\")"
 msgstr ""
 
 #: curses/wicd-curses.py:205
@@ -943,9 +943,9 @@ msgstr ""
 
 #: data/wicd.ui:960
 msgid ""
-"If enabled, the wired network interface will always be displayed in the "
-"main window. This can be useful if your wired network card does not "
-"detect when the interface is connected to a cable."
+"If enabled, the wired network interface will always be displayed in the main "
+"window. This can be useful if your wired network card does not detect when "
+"the interface is connected to a cable."
 msgstr ""
 
 #: data/wicd.ui:976
@@ -1003,4 +1003,3 @@ msgid ""
 "You should almost always use wext as the\n"
 "WPA supplicant driver."
 msgstr ""
-