Launchpad automatic translations update.

po/zh_CN.po

@@ -9,10 +9,11 @@ msgstr ""
 "PO-Revision-Date: 2011-09-18 16:07+0000\n"
 "Last-Translator: David Paleino <dapal@debian.org>\n"
 "Language-Team: zh_CN <LL@li.org>\n"
-"Plural-Forms: nplurals=1; plural=0\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=utf-8\n"
 "Content-Transfer-Encoding: 8bit\n"
+"X-Launchpad-Export-Date: 2011-10-20 04:47+0000\n"
+"X-Generator: Launchpad (build 14165)\n"
 "Generated-By: Babel 0.9.6\n"
 
 #: gtk/wicd-client.py:608
@@ -187,8 +188,8 @@ msgstr ""
 
 #: gtk/gui.py:65 gtk/wicd-client.py:952
 msgid ""
-"Could not connect to wicd's D-Bus interface. Check the wicd log for error"
-" messages."
+"Could not connect to wicd's D-Bus interface. Check the wicd log for error "
+"messages."
 msgstr "无法连接到 wicd 的 D-Bus 接口。错误信息请查看 wicd 日志。"
 
 #: gtk/netentry.py:302 gtk/netentry.py:410
@@ -203,10 +204,11 @@ msgstr "建立Ad-Hoc网络"
 
 #: curses/wicd-curses.py:99
 msgid ""
-"DBus failure! This is most likely caused by the wicd daemon stopping "
-"while wicd-curses is running. Please restart the daemon, and then restart"
-" wicd-curses."
-msgstr "DBus错误！通常的原因是：在运行 wicd-curses 时 wicd 守护进程停止工作。请重启守护进程然后重新运行 wicd-curses。"
+"DBus failure! This is most likely caused by the wicd daemon stopping while "
+"wicd-curses is running. Please restart the daemon, and then restart wicd-"
+"curses."
+msgstr ""
+"DBus错误！通常的原因是：在运行 wicd-curses 时 wicd 守护进程停止工作。请重启守护进程然后重新运行 wicd-curses。"
 
 #: curses/prefs_curses.py:92
 msgid "DHCP Client"
@@ -269,8 +271,8 @@ msgstr "连接完成..."
 
 #: curses/wicd-curses.py:1051
 msgid ""
-"ERROR: wicd-curses was denied access to the wicd daemon: please check "
-"that your user is in the \"$A\" group."
+"ERROR: wicd-curses was denied access to the wicd daemon: please check that "
+"your user is in the \"$A\" group."
 msgstr "错误：wicd-curses 拒绝了对 wicd 后台进程的访问： 请确定用户属于“$A“组。"
 
 #: curses/wicd-curses.py:460 gtk/gui.py:266
@@ -391,13 +393,12 @@ msgstr "正在获取 IP 地址..."
 
 #: curses/wicd-curses.py:277
 msgid ""
-"Once there, you can adjust (or add) the \"beforescript\", "
-"\"afterscript\", \"predisconnectscript\" and \"postdisconnectscript\" "
-"variables as needed, to change the preconnect, postconnect, predisconnect"
-" and postdisconnect scripts respectively.  Note that you will be "
-"specifying the full path to the scripts - not the actual script contents."
-"  You will need to add/edit the script contents separately.  Refer to the"
-" wicd manual page for more information."
+"Once there, you can adjust (or add) the \"beforescript\", \"afterscript\", "
+"\"predisconnectscript\" and \"postdisconnectscript\" variables as needed, to "
+"change the preconnect, postconnect, predisconnect and postdisconnect scripts "
+"respectively.  Note that you will be specifying the full path to the scripts "
+"- not the actual script contents.  You will need to add/edit the script "
+"contents separately.  Refer to the wicd manual page for more information."
 msgstr ""
 
 #: wicd/translations.py:81
@@ -614,8 +615,8 @@ msgstr "被用户终止"
 
 #: gtk/gui.py:85 gtk/wicd-client.py:981
 msgid ""
-"The wicd daemon has shut down. The UI will not function properly until it"
-" is restarted."
+"The wicd daemon has shut down. The UI will not function properly until it is "
+"restarted."
 msgstr "wicd 守护进程关闭。直到其重启之后，图形界面才能正常工作。"
 
 #: curses/netentry_curses.py:368 gtk/gui.py:700 gtk/netentry.py:496
@@ -625,24 +626,23 @@ msgstr "该网络需要使用加密协议"
 #: curses/wicd-curses.py:271
 msgid ""
 "To avoid various complications, wicd-curses does not support directly "
-"editing the scripts. However, you can edit them manually. First, (as "
-"root), open the \"$A\" config file, and look for the section labeled by "
-"the $B in question. In this case, this is:"
+"editing the scripts. However, you can edit them manually. First, (as root), "
+"open the \"$A\" config file, and look for the section labeled by the $B in "
+"question. In this case, this is:"
 msgstr ""
 
 #: gtk/netentry.py:634
 msgid ""
-"To connect to a wired network, you must create a network profile. To "
-"create a network profile, type a name that describes this network, and "
-"press Add."
+"To connect to a wired network, you must create a network profile. To create "
+"a network profile, type a name that describes this network, and press Add."
 msgstr ""
 "要连接到一个有线网络，你必须创建一个网络配置。\r\n"
 "要创建一个网络配置，输入一个名称来描述这个网络，然后按“添加”"
 
 #: gtk/wicd-client.py:94
 msgid ""
-"Unable to contact the Wicd daemon due to an access denied error from "
-"DBus. Please check that your user is in the $A group."
+"Unable to contact the Wicd daemon due to an access denied error from DBus. "
+"Please check that your user is in the $A group."
 msgstr "由于DBus访问拒绝错误而无法连接到Wicd守护进程，请检查你是否属于$A用户组。"
 
 #: curses/wicd-curses.py:352 gtk/netentry.py:961 gtk/netentry.py:1083
@@ -794,8 +794,8 @@ msgstr "你应该尽量用 wext 作为WPA supplicat 的驱动"
 
 #: curses/wicd-curses.py:427
 msgid ""
-"wicd-curses does not support deleting the last wired profile.  Try "
-"renaming it (\"F2\")"
+"wicd-curses does not support deleting the last wired profile.  Try renaming "
+"it (\"F2\")"
 msgstr ""
 
 #: curses/wicd-curses.py:205
@@ -943,9 +943,9 @@ msgstr ""
 
 #: data/wicd.ui:960
 msgid ""
-"If enabled, the wired network interface will always be displayed in the "
-"main window. This can be useful if your wired network card does not "
-"detect when the interface is connected to a cable."
+"If enabled, the wired network interface will always be displayed in the main "
+"window. This can be useful if your wired network card does not detect when "
+"the interface is connected to a cable."
 msgstr ""
 
 #: data/wicd.ui:976
@@ -1003,4 +1003,3 @@ msgid ""
 "You should almost always use wext as the\n"
 "WPA supplicant driver."
 msgstr ""
-