The functions of main.c should be included in main.h, not in funcs.h.
This patch adds the main.h file and moves the function prototypes to
this file.
The not needed "include funcs.h" are removed.
This patch removes the unneeded curly brackets in multiple files.
It also add some comments in the code. In usermenu.c removes some
variables not used.
Non-obvious fixes:
WINGs/wfilepanel.c: Cast to void to avoid an unused calculated value
warning.
WINGs/wtabview.c: Test tab<0 to avoid a warning from the next condition
about signed overflow in an inlined invocation of the function.
Signed-off-by: Brad Jorsch <anomie@users.sourceforge.net>
This patch makes wmaker automatically Restart() to take into account
resolution changes done by xrandr.
The motivation to write this patch is that when I start my laptop connected
to an external monitor (VGA1), the resolution in the monitor is initially
wrong (perhaps this is a bug in XOrg or OpenSuse, but anyway), so I always
do this after starting wmaker:
xrandr --output VGA1 --preferred
The resolution in the external monitor gets fixed, but wmaker does not
recognize the change automatically and I have to manually restart it.
So this patch avoids the last step by making wmaker be XRandR-aware.
Wmaker now restarts automatically when it receives a RRChangeScreenNotify
event and I don't have to do the last part of the silly procedure described
above.
I am not sure if restarting wmaker is the most elegant solution, but
it at least solves part of my issue with wmaker + xrandr.
Why?
1. The reason for its existence is to "Disable some stuff that are
duplicated in kde", and I don't think I will ever need that.
Furthermore, even the description in the configure script reads
"disable some stuff (dont use it)".
2. It makes the code uglier at some places, e.g.,
#ifdef LITE
{
#if 0
}
#endif
#else
if (!wRootMenuPerformShortcut(event)) {
#endif
which by the way is the ugliness which motivated this patch.
3. Does not even compile anymore. It fails with
CC dockedapp.o
CC event.o
event.c: In function 'executeButtonAction:
event.c:711: error: WScreen has no member named root_menu
event.c:712: error: WScreen has no member named root_menu
event.c:713: error: WScreen has no member named root_menu
event.c:715: error: WScreen has no member named root_menu
event.c:720: error: WScreen has no member named switch_menu
event.c:721: error: WScreen has no member named switch_menu
event.c:722: error: WScreen has no member named switch_menu
event.c:724: error: WScreen has no member named switch_menu
make[2]: *** [event.o] Error 1
make[1]: *** [all] Error 2
make: *** [all-recursive] Error 1
But instead of fixing this (it would be trivial), let's get
rid of the whole ugliness altogether.
1. Setup two windows in a workspace, one at the center and the
other at a corner. Move the mouse to the center of the screen, so
that the focus goes to the center window. Now, with the help of the
keyboard (with Alt-tab, typically), try and switch the focus to the
other window. In doing so, the switch panel shows up, gives the
focus to the other window and then disappears. However, its
disappearance make it seem to wmaker that the mouse has just
entered the center window, so wmaker gives the focus to that
window again.
2. It is a lit bit more involved. "Raise window when switching
focus with keyboard" needs to be set. In a given workspace, maximize
a first window A, then setup "above" window A two windows B and C
(one in the upper left corner and the other one in the lower right
corner, for example). Move the mouse so as to give the focus to
window B. Press the Alt key, hit the key tab once (window A moves
up to the "top"), then another time (window C is then selected).
Eventually relase the Alt key: window B is given the focus again.
Correction: it is a matter of ignoring some (EnterNotify) events
when the switch panel is active or has just been used.
for arq in `git ls-files *.c`; do
echo $arq;
indent -linux -l115 $arq;
done
The different line break at 115 columns is because
I use a widescreen monitor :-)
This patch fixes the following warnings (with gcc 4.2.3)
defaults.c:980: warning: unused variable 'replace'
main.c:504: warning: 'watchPath' may be used uninitialized in this function
main.c:504: note: 'watchPath' was declared here
startup.c:616: warning: implicit declaration of function 'XrmUniqueQuark'
event handler timer.
After upgrading my kernel recently I noticed that dnotify has been
depreciated, so I decided to try and implement the new inotify code in
Window Maker instead.
During testing, I also found that one of the timers which was removed
(the one causing the most wake-ups), calling delayedAction, was
responsible for handling signals. Basically with this timer removed,
signals were only handled after an X event occurs.
After looking at the delayedAction function, I couldn't see the purpose of it.
It certainly wouldn't cause any delay as it was called by the timer every
500ms, so there is no time correlation with when a signal was received.
Also, it appeared to count the signals and call DispatchEvent for each
one, but it appears DispatchEvent would just handle the most recent signal
and take action on that. The signals handled by delayedAction are the
various exit and reset signals, so only one need to be handled. I
therefore have commented out delayedAction (it wasn't called by any other
procedure) and added a call to DispatchEvent imediately after the signal
is registered, in handleExitSig.
I'm not sure what problems this may cause with dead children - these are
only cleaned up after an Xevent now that the timer is removed- but I
haven't observed any problems since a few months ago.
This patch removes wmaker from PowerTop's shame list, where
it appeared with ~3-4 wakeups/second.
It adds the linux kernel's dnotify mechanism (adapted from
the example in Documentation/dnotify.txt in the kernel source),
to detect when a configuration file in ~/GNUStep/Defaults has
changed to load it again on-the-fly. For me it usually means that
modifications to ~/GNUStep/Defaults/WMRootMenu via the 'genmenu'
script are automatically detected and loaded.
The use of dnotify makes the ancient behaviour of polling unecessary
and cuts down the wakeups count.
Other 'apparently' useless timers are also deleted and it's been almost
one year now that I use this patched exclusively without problems, so
I am pretty sure that it doesn't hurt to remove them.
The end result of all this is that wmaker generates 0 (zero) wakeups
when idle in a Linux system.
Signed-off-by: Carlos R. Mafra <crmafra@ift.unesp.br>
- Keep menu and title text at 12px since there is not constrained by width
- Removed some obsoleted options from wconfig.h
- Added a lighter image for the switch panel
- Fixed the signal handler for crashes (ie, removed it) and made wmaker
restarting be made automatically by a monitoring process.
- Made NetWM support be enabled by default
- Removed old code to store/restore workspace state (now relies on netwm)
- Fixed bug in icon chooser dialog that could cause a segmentation fault
in some cases (Pascal Hofstee <caelian@gmail.com>)
- Fixed crash in asm code in wrlib, with new versions of gcc.
- Fixed bug in the x86_PseudoColor_32_to_8() function which incorrectly
used the r, g, b fields in the conversion.
- Fixed x86 ASM code in wrlib to work on 64 bit architectures.
- Fixed the focus flicker seen with some apps (notably gtk2)
(Alexey Spiridonov <snarkmaster@gmail.com>)
- Fixed all crashing bugs that were generated by wmaker starting with the
WMState file missing.
- Added NetWM support (a modified version of the patch originaly written
by Peter Zijlstra <a.p.zijlstra@chello.nl>)
- Applied patch to enhance the Virtual Desktop behaviour, and to integrate
it with the NetWM code (Peter Zijlstra <a.p.zijlstra@chello.nl>)
- Applied a few xinerama and placement fixes (Peter Zijlstra
<a.p.zijlstra@chello.nl>)
- Fixed memory leak in dock code.
- Fixed and enhanced the text wrapping in WINGs.
- Fixed the layout of some elements in WPrefs.app
- Added workaround for aplications that don't set the required hints on the
client leader window, but they set them on normal windows (observer with
KDE 3.3.0 mainly). This will allow these apps to get an appicon again.
(they should be fixed still)
- Added workaround for applications that do not set a command with
XSetCommand(), but instead they set the _NET_WM_PID property. This works
with operating systems that offer a /proc interface similar to what linux
has. (This also is to fix problems with KDE 3.3.0 apps, but not only them).
- Fixed bug with autostart and exit scripts not being executed if user
GNUstep path was different from ~/GNUstep (when setting GNUSTEP_USER_ROOT)
- Added utf8 support in WINGs (removed old X core font code)
- Added utility to convert old font names to new font names in style files
manager" option in the crashing dialog panel.
- Window Maker will now use the WINDOWMAKER_ALT_WM environment variable (if
it is defined) to overwrite the default hardcoded fallback window manager.
- Separated the font caches for normal fonts and fontsets in WINGs (they can
have the same names and collide in the cache giving unwanted results)
- Updated the years in the copyright notices
- Removed MIN() and MAX() macros and replaced them with WMIN() and WMAX() from
WINGs.
- Added a hint that Window Maker crashed, to allow windows to be placed
in their correct previous positions after a crash situation and also to
preserve their state before the crash (minimized, shaded, hidden, ...)
