Add po's from Rosetta, and implement message extraction (pybabel + xgettext)

po/zh_TW.po

@@ -0,0 +1,751 @@
+# Translations for Chinese (Taiwan) (zh_TW)
+# Translator ID 17
+# /translator/edit/17/
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2011-09-18 17:21+0200\n"
+"PO-Revision-Date: 2011-09-18 16:13+0000\n"
+"Last-Translator: David Paleino <dapal@debian.org>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Launchpad-Export-Date: 2011-09-20 05:12+0000\n"
+"X-Generator: Launchpad (build 13980)\n"
+
+#: wicd/translations.py:61
+msgid "Resetting IP address..."
+msgstr "正在重新設置IP地址..."
+
+#: wicd/translations.py:62
+msgid "Preferences dialog"
+msgstr "偏好選單:"
+
+#: wicd/translations.py:63
+msgid "Connection Failed: No DHCP offers received."
+msgstr "連接失敗: 未收到 DHCP 封包"
+
+#: wicd/translations.py:64
+msgid "For more detailed help, consult the wicd-curses(8) man page."
+msgstr "要了解更多資訊，請參考 wicd-curses (8) 手冊"
+
+#: wicd/translations.py:65
+msgid "Connection Failed: Bad password"
+msgstr "連接失敗: 密碼錯誤"
+
+#: wicd/translations.py:66
+msgid ""
+"Unable to connect to wicd daemon DBus interface. This typically means there "
+"was a problem starting the daemon. Check the wicd log for more information."
+msgstr "無法連接 wicd daemon 的 DBus 介面。通常是無法正常啟動  daemon。請檢查 wicd 記錄檔以得到更多資訊"
+
+#: wicd/translations.py:67
+msgid "Verifying access point association..."
+msgstr "核對基地台連結狀況..."
+
+#: wicd/translations.py:68
+msgid "Always show wired interface"
+msgstr "總是顯示有線網路介面"
+
+#: wicd/translations.py:69
+msgid ""
+"Could not connect to wicd's D-Bus interface. Check the wicd log for error "
+"messages."
+msgstr "不能連接到wicd的D-Bus介面,請檢查wicd的紀錄檔以追查錯誤訊息"
+
+#: wicd/translations.py:70
+msgid "Path to PAC File"
+msgstr "PAC檔案的路徑"
+
+#: wicd/translations.py:71
+msgid "Always switch to wired connection when available"
+msgstr "有線網路可以用時切換成有線網路"
+
+#: wicd/translations.py:72
+msgid "Disconnect from all networks"
+msgstr "將所有的網路斷線"
+
+#: wicd/translations.py:73
+msgid "Wired Networks"
+msgstr "有線網路"
+
+#: wicd/translations.py:74
+msgid "Changes to your backend won't occur until the daemon is restarted."
+msgstr "更改後端設定必需在重啟 daemon 之後才會生效"
+
+#: wicd/translations.py:75
+msgid "Stop a network connection in progress"
+msgstr "停止正在進行的網路連線"
+
+#: wicd/translations.py:76
+msgid "Connecting"
+msgstr "嘗試連線"
+
+#: wicd/translations.py:77
+msgid "Run pre-disconnect script"
+msgstr "執行 pre-disconnect script"
+
+#: wicd/translations.py:78
+msgid ""
+"To avoid various complications, wicd-curses does not support directly "
+"editing the scripts.  However, you can edit them manually.  First, (as "
+"root)\", open the \"$A\" config file, and look for the section labeled by "
+"the $B in question.  In this case, this is:"
+msgstr ""
+
+#: wicd/translations.py:79
+msgid ""
+"You can also configure the wireless networks by looking for the "
+"\"[<ESSID>]\" field in the config file."
+msgstr ""
+
+#: wicd/translations.py:80
+msgid ""
+"Once there, you can adjust (or add) the \"beforescript\", \"afterscript\", "
+"and \"disconnectscript\" variables as needed, to change the preconnect, "
+"postconnect, and disconnect scripts respectively.  Note that you will be "
+"specifying the full path to the scripts - not the actual script contents.  "
+"You will need to add/edit the script contents separately.  Refer to the wicd "
+"manual page for more information."
+msgstr ""
+
+#: wicd/translations.py:81
+msgid "You must enter your password to configure scripts"
+msgstr "您必須輸入密碼到組態檔上"
+
+#: wicd/translations.py:82
+msgid "DNS domain"
+msgstr "DNS 網域"
+
+#: wicd/translations.py:83
+msgid "Connection Cancelled"
+msgstr "取消連線"
+
+#: wicd/translations.py:84
+msgid "Scanning networks... stand by..."
+msgstr "掃描網路中...請稍後..."
+
+#: wicd/translations.py:85
+msgid "Password"
+msgstr "密碼"
+
+#: wicd/translations.py:86
+msgid "Wicd daemon unreachable"
+msgstr "無法連接 Wicd daemon"
+
+#: wicd/translations.py:87
+msgid "Use Static DNS"
+msgstr "使用靜態DNS"
+
+#: wicd/translations.py:88
+msgid "Setting broadcast address..."
+msgstr "正在設置廣播位址..."
+
+#: wicd/translations.py:89
+msgid "Select or create a wired profile to connect with"
+msgstr "選取或建立一個有線網路設定檔以供使用"
+
+#: wicd/translations.py:90
+msgid ""
+"To connect to a wired network, you must create a network profile.  To create "
+"a network profile, type a name that describes this network, and press Add."
+msgstr "為了要連上有線網路,你必須創造一個新的網路設定檔,鍵入一個描述網路的名字，然後按下Add."
+
+#: wicd/translations.py:91
+msgid "Press ESC to cancel"
+msgstr "按下 ESC 以取消"
+
+#: wicd/translations.py:92
+msgid "Scanning"
+msgstr "掃描中"
+
+#: wicd/translations.py:93
+msgid "Flushing the routing table..."
+msgstr "正在刷新路由表"
+
+#: wicd/translations.py:94
+msgid "Brought to you by:"
+msgstr ""
+
+#: wicd/translations.py:95
+msgid "Refresh network list"
+msgstr "更新網路列表"
+
+#: wicd/translations.py:96
+msgid "Select Hidden Network ESSID"
+msgstr "選擇隱藏網路 ESSID"
+
+#: wicd/translations.py:97
+msgid "External Programs"
+msgstr "外部程式"
+
+#: wicd/translations.py:98
+msgid "Connect"
+msgstr "連接"
+
+#: wicd/translations.py:99
+msgid "Display this help dialog"
+msgstr "顯示求助對話框"
+
+#: wicd/translations.py:100
+msgid "Use global DNS servers"
+msgstr "使用全域DNS伺服器"
+
+#: wicd/translations.py:101
+msgid "This network requires encryption to be enabled."
+msgstr "此網路需要加密才能連結。"
+
+#: wicd/translations.py:102
+msgid "Use last used profile on wired autoconnect"
+msgstr "有線自動連接時,使用最近用過的設定檔"
+
+#: wicd/translations.py:103
+msgid "Preferences"
+msgstr "喜好設定"
+
+#: wicd/translations.py:104
+msgid "Connection Failed: Unable to Get IP Address"
+msgstr "連線失敗： 無法取得 IP 位址"
+
+#: wicd/translations.py:105
+msgid "Setting static IP addresses..."
+msgstr "正在設置靜態IP地址..."
+
+#: wicd/translations.py:106
+msgid "Connecting to daemon..."
+msgstr "連線至 daemon..."
+
+#: wicd/translations.py:107
+msgid "Automatically connect to this network"
+msgstr "自動連接這個網絡"
+
+#: wicd/translations.py:108
+msgid "Add a new wired profile"
+msgstr "新增一個有線設定檔"
+
+#: wicd/translations.py:109
+msgid "DHCP Client"
+msgstr "DHCP 客戶端"
+
+#: wicd/translations.py:110
+msgid "Use dBm to measure signal strength"
+msgstr "使用dBm度量訊號強度"
+
+#: wicd/translations.py:111
+msgid "Use these settings for all networks sharing this essid"
+msgstr "使用此設定讓所有網路分享此 essid"
+
+#: wicd/translations.py:112
+msgid "Configure Selected Network"
+msgstr "設定所選取的網路"
+
+#: wicd/translations.py:113
+msgid "Enable debug mode"
+msgstr "啟用除錯模式"
+
+#: wicd/translations.py:114
+msgid "Removing old connection..."
+msgstr "移除舊連接中..."
+
+#: wicd/translations.py:115
+msgid ""
+"Could not find a graphical sudo program.  The script editor could not be "
+"launched.  You'll have to edit scripts directly your configuration file."
+msgstr "無法找到圖形化 sudo 程式。此程序編輯器無法啟動。您必須字型在您的設定檔中編輯程序。"
+
+#: wicd/translations.py:116
+msgid "Wireless Networks"
+msgstr "無線網路"
+
+#: wicd/translations.py:117
+msgid "Configuring preferences for wired profile \"$A\""
+msgstr "進行 \"$A\" 設定檔的偏好設定"
+
+#: wicd/translations.py:118
+msgid "No wireless networks found."
+msgstr "找不到無線網絡。"
+
+#: wicd/translations.py:119
+msgid "Check if using madwifi/atheros drivers"
+msgstr "檢查是否使用 madwifi/atheros 驅動程式"
+
+#: wicd/translations.py:120
+msgid "Properties"
+msgstr "特性"
+
+#: wicd/translations.py:121
+msgid "Setting encryption info"
+msgstr "設定加密資訊"
+
+#: wicd/translations.py:122
+msgid "About Wicd"
+msgstr "關於 Wicd:"
+
+#: wicd/translations.py:123
+msgid "OK"
+msgstr "確定"
+
+#: wicd/translations.py:124
+msgid "Set up Ad-hoc network"
+msgstr "設定 Ad-hoc 網路"
+
+#: wicd/translations.py:125
+msgid "Select scripts"
+msgstr "選擇 scripts"
+
+#: wicd/translations.py:126
+msgid "Invalid address in $A entry."
+msgstr "在 $A 項目中有無法使用的位址"
+
+#: wicd/translations.py:127
+msgid "Configuring wireless interface..."
+msgstr "正在設定無線網路介面..."
+
+#: wicd/translations.py:128
+msgid "Generating PSK..."
+msgstr "產生PSK中..."
+
+#: wicd/translations.py:129
+msgid "Validating authentication..."
+msgstr "驗証認証資訊中..."
+
+#: wicd/translations.py:130
+msgid "ESSID"
+msgstr "ESSID"
+
+#: wicd/translations.py:131
+msgid "Anonymous Identity"
+msgstr "匿名的身份"
+
+#: wicd/translations.py:132
+msgid "Wireless Interface"
+msgstr "無線網路介面"
+
+#: wicd/translations.py:133
+msgid "Hidden Network"
+msgstr "隱藏的網路"
+
+#: wicd/translations.py:134
+msgid "Key"
+msgstr "密鑰"
+
+#: wicd/translations.py:135
+msgid "Wicd Curses Interface"
+msgstr "Wicd Curses 介面"
+
+#: wicd/translations.py:136
+msgid "Debugging"
+msgstr "除錯中"
+
+#: wicd/translations.py:137
+msgid "Use Encryption"
+msgstr "使用加密"
+
+#: wicd/translations.py:138
+msgid "WPA Supplicant"
+msgstr ""
+
+#: wicd/translations.py:139
+msgid "Global DNS servers"
+msgstr "全域 DNS 主機"
+
+#: wicd/translations.py:140
+msgid "Not connected"
+msgstr "未連接"
+
+#: wicd/translations.py:141
+msgid "Done connecting..."
+msgstr "完成連接中..."
+
+#: wicd/translations.py:142
+msgid "Can't connect to the daemon, trying to start it automatically..."
+msgstr "無法連接 daemon。嘗試自動啟動它..."
+
+#: wicd/translations.py:143
+msgid "Cancel"
+msgstr "取消"
+
+#: wicd/translations.py:144
+msgid "All controls are case sensitive"
+msgstr "所有的控制項皆為大小寫有別"
+
+#: wicd/translations.py:145
+msgid "Gateway"
+msgstr "閘道器"
+
+#: wicd/translations.py:146
+msgid "Backend"
+msgstr "後端"
+
+#: wicd/translations.py:147
+msgid ""
+"DBus failure! This is most likely caused by the wicd daemon stopping while "
+"wicd-curses is running. Please restart the daemon, and then restart wicd-"
+"curses."
+msgstr ""
+
+#: wicd/translations.py:148
+msgid "Terminated by user"
+msgstr "操作被使用者中止"
+
+#: wicd/translations.py:149
+msgid "Wired Link Detection"
+msgstr "有線連線偵測"
+
+#: wicd/translations.py:150
+msgid "Add a new profile"
+msgstr "新增設定檔"
+
+#: wicd/translations.py:151
+msgid "Activate Internet Connection Sharing"
+msgstr "啟用網際網路連接分享"
+
+#: wicd/translations.py:152
+msgid "Create an Ad-Hoc Network"
+msgstr "建立 Ad-Hoc 網路"
+
+#: wicd/translations.py:153
+msgid "Putting interface up..."
+msgstr "正在開啟網路介面..."
+
+#: wicd/translations.py:154
+msgid "Global DNS has not been enabled in general preferences."
+msgstr "全域 DNS 並沒有在一般偏好設定中啟用"
+
+#: wicd/translations.py:155
+msgid "DNS"
+msgstr "名稱伺服器"
+
+#: wicd/translations.py:156
+msgid "Advanced Settings"
+msgstr "進階設定"
+
+#: wicd/translations.py:157
+msgid "Username"
+msgstr "用戶名"
+
+#: wicd/translations.py:158
+msgid "Automatic (recommended)"
+msgstr "自動 (建議值)"
+
+#: wicd/translations.py:159
+msgid "Wired connection detected"
+msgstr "偵測到有線網路"
+
+#: wicd/translations.py:160
+msgid "Netmask"
+msgstr "網路遮罩"
+
+#: wicd/translations.py:161
+msgid "Choose from the networks below:"
+msgstr "請選擇以下網絡:"
+
+#: wicd/translations.py:162
+msgid "Connect to selected network"
+msgstr "連接到選擇網路:"
+
+#: wicd/translations.py:163
+msgid ""
+"wicd-curses does not support deleting the last wired profile.  Try renaming "
+"it ('F2')"
+msgstr ""
+
+#: wicd/translations.py:164
+msgid "General Settings"
+msgstr "一般設定:"
+
+#: wicd/translations.py:165
+msgid "Connected to $A at $B (IP: $C)"
+msgstr "已經連接到$A 在 $B (IP: $C)"
+
+#: wicd/translations.py:166
+msgid ""
+"EXCEPTION! Please report this to the maintainer and file a bug report with "
+"the backtrace below:"
+msgstr ""
+
+#: wicd/translations.py:167
+msgid "Configuring preferences for wireless network \"$A\" ($B)"
+msgstr "設定無線網路 \"$A\" ($B) 的偏好設定"
+
+#: wicd/translations.py:168
+msgid "Generating WPA configuration file..."
+msgstr "正在產生WPA設定檔..."
+
+#: wicd/translations.py:169
+msgid "Search domain"
+msgstr "搜尋網域"
+
+#: wicd/translations.py:170
+msgid "Required encryption information is missing."
+msgstr "缺乏所需的加密資訊"
+
+#: wicd/translations.py:171
+msgid "Obtaining IP address..."
+msgstr "獲取IP地址中..."
+
+#: wicd/translations.py:172
+msgid ""
+"The wicd daemon has shut down. The UI will not function properly until it is "
+"restarted."
+msgstr "Wicd daemon 已被關閉。只有重新啟動 daemon 才能讓使用者介面正常運作"
+
+#: wicd/translations.py:173
+msgid ""
+"To connect to a wired network, you must create a network profile. To create "
+"a network profile, type a name that describes this network, and press Add."
+msgstr "要連線到有線網路，您必需建立一個網路設定檔。要建立網路設定檔，請鍵入描述此網路的名稱，然後按下 Add"
+
+#: wicd/translations.py:174
+msgid "Setting static DNS servers..."
+msgstr "正在設置靜態DNS伺服器..."
+
+#: wicd/translations.py:175
+msgid "Automatically reconnect on connection loss"
+msgstr "當連線中斷時,自動重新連接"
+
+#: wicd/translations.py:176
+msgid "Use Encryption (WEP only)"
+msgstr "使用加密(僅WEP)"
+
+#: wicd/translations.py:177
+msgid "Wired Autoconnect Settings"
+msgstr "有線網路自動連線設定"
+
+#: wicd/translations.py:178
+msgid "Run script before connect"
+msgstr "連接前先執行腳本"
+
+#: wicd/translations.py:179
+msgid "You should almost always use wext as the WPA supplicant driver"
+msgstr ""
+
+#: wicd/translations.py:180
+msgid "Network Interfaces"
+msgstr "網路介面"
+
+#: wicd/translations.py:181
+msgid "Use default profile on wired autoconnect"
+msgstr "有線自動連接時,使用預設的設定檔"
+
+#: wicd/translations.py:182
+msgid "Scan"
+msgstr "掃描:"
+
+#: wicd/translations.py:183
+msgid "IP"
+msgstr "IP地址"
+
+#: wicd/translations.py:184
+msgid "Connected to wired network (IP: $A)"
+msgstr "已連接到有線網絡(IP: $A)"
+
+#: wicd/translations.py:185
+msgid "WPA Supplicant Driver"
+msgstr "WPA Supplicant 驅動程式"
+
+#: wicd/translations.py:186
+msgid "Wicd needs to access your computer's network cards."
+msgstr "Wicd要存取您的電腦網路卡."
+
+#: wicd/translations.py:187
+msgid "Wireless Kill Switch Enabled"
+msgstr ""
+
+#: wicd/translations.py:188
+msgid "Hidden Network ESSID"
+msgstr "隱藏的網路ESSID"
+
+#: wicd/translations.py:189
+msgid "Secured"
+msgstr "安全的"
+
+#: wicd/translations.py:190
+msgid "Putting interface down..."
+msgstr "正在關閉網路介面..."
+
+#: wicd/translations.py:191
+msgid "Authentication"
+msgstr "驗證"
+
+#: wicd/translations.py:192
+msgid "Run script after connect"
+msgstr "連接後再執行腳本"
+
+#: wicd/translations.py:193
+msgid "Prompt for profile on wired autoconnect"
+msgstr "有線自動連接時,提示設定檔"
+
+#: wicd/translations.py:194
+msgid "Channel"
+msgstr "頻道"
+
+#: wicd/translations.py:195
+msgid "Unsecured"
+msgstr "不安全的"
+
+#: wicd/translations.py:196
+msgid "Rename wired profile"
+msgstr "重新命名設定:"
+
+#: wicd/translations.py:197
+msgid "The wicd daemon is unavailable, so your request cannot be completed"
+msgstr "wicd 伺服軟體未執行，無法完成您的指令。"
+
+#: wicd/translations.py:198
+msgid "Stop Showing Autoconnect pop-up temporarily"
+msgstr "暫時停止顯示自動重新連結通知:"
+
+#: wicd/translations.py:199
+msgid "Scan for hidden networks"
+msgstr "掃描隱藏網路:"
+
+#: wicd/translations.py:200
+msgid "Use Static IPs"
+msgstr "使用靜態IP地址"
+
+#: wicd/translations.py:201
+msgid "use urwid's raw screen controller"
+msgstr ""
+
+#: wicd/translations.py:202
+msgid "Route Table Flushing"
+msgstr "更新路由表:"
+
+#: wicd/translations.py:203
+msgid "Scripts"
+msgstr "腳本"
+
+#: wicd/translations.py:204
+msgid "Identity"
+msgstr "身份"
+
+#: wicd/translations.py:205
+msgid "Automatic Reconnection"
+msgstr "自動重新連接:"
+
+#: wicd/translations.py:206
+msgid "Wired Interface"
+msgstr "有線網路介面"
+
+#: wicd/translations.py:207
+msgid "Press F8 or Q to quit."
+msgstr "按 F8 或 Q 離開。"
+
+#: wicd/translations.py:208
+msgid "Use as default profile (overwrites any previous default)"
+msgstr "作為預設選項 (覆蓋前次設定):"
+
+#: wicd/translations.py:209
+msgid "Wired Network"
+msgstr "有線網絡"
+
+#: wicd/translations.py:210
+msgid "DNS server"
+msgstr "DNS 伺服器:"
+
+#: wicd/translations.py:211
+msgid "Notifications"
+msgstr "通知"
+
+#: wicd/translations.py:212
+msgid "Display notifications about connection status"
+msgstr "顯示連線狀態通知"
+
+#: wicd/translations.py:213
+msgid "Connection established"
+msgstr "已建立連線"
+
+#: wicd/translations.py:214
+msgid "Disconnected"
+msgstr "斷線"
+
+#: wicd/translations.py:215
+msgid "Establishing connection..."
+msgstr "建立連線中"
+
+#: wicd/translations.py:216
+msgid "Connection failed: Could not contact the wireless access point."
+msgstr "連線失敗：無法聯接到無線網路存取點。"
+
+#: wicd/translations.py:217
+msgid ""
+"Unable to contact the Wicd daemon due to an access denied error from DBus. "
+"Please check that your user is in the $A group."
+msgstr ""
+
+#: wicd/translations.py:218
+msgid "Disconnecting active connections..."
+msgstr "正在中斷使用中的連線"
+
+#: wicd/translations.py:219
+msgid ""
+"ERROR: wicd-curses was denied access to the wicd daemon: please check that "
+"your user is in the \"$A\" group."
+msgstr ""
+
+#: wicd/translations.py:220
+msgid "Run post-disconnect script"
+msgstr ""
+
+#: wicd/translations.py:221
+msgid "Resume script"
+msgstr "重設指令搞"
+
+#: wicd/translations.py:222
+msgid "Suspend script"
+msgstr "暫停指令搞"
+
+#: wicd/translations.py:223
+msgid "Invalid IP address entered."
+msgstr "無效的 IP 位址。"
+
+#: wicd/translations.py:224
+msgid "Ping static gateways after connecting to verify association"
+msgstr "在連線後 ping 固定gateway 以認證連結"
+
+#: wicd/translations.py:225
+msgid ""
+"$A\r\n"
+"$B\r\n"
+"$C\r\n"
+"$D\r\n"
+"$E KB/s\r\n"
+"$F KB/s"
+msgstr ""
+
+#: wicd/translations.py:231
+msgid ""
+"$A\r\n"
+"$B KB/s\r\n"
+"$C KB/s"
+msgstr ""
+
+#: wicd/translations.py:234
+msgid ""
+"Wireless\r\n"
+"SSID:\r\n"
+"Speed:\r\n"
+"IP:\r\n"
+"Strength:\r\n"
+"RX:\r\n"
+"TX:"
+msgstr "無線 SSID: 速度: IP: 強度: RX: TX:"
+
+#: wicd/translations.py:241
+msgid ""
+"Wired\r\n"
+"IP:\r\n"
+"RX:\r\n"
+"TX:"
+msgstr "已連結 IP:RX: TX:"
+
+#: wicd/translations.py:245
+msgid "Switch On Wi-Fi"
+msgstr ""
+
+#: wicd/translations.py:246
+msgid "Switch Off Wi-Fi"
+msgstr ""